[PATCH 1/2] mountmgr: Populate HKLM\HARDWARE\DEVICEMAP\Scsi here instead of in kernel32. (try 5)
Charles Davis
cdavis at mymail.mines.edu
Mon May 9 11:13:01 CDT 2011
On 5/9/11 8:36 AM, Vitaliy Margolen wrote:
> On 05/09/2011 07:42 AM, Charles Davis wrote:
>> Try 5: Get the value of "DeviceName" from mountmgr instead of making
>> one up.
>> Try 4: Fix unused variable warning.
>> Try 3: Add support for IDE drives.
>> Try 2: Don't depend on the SCSI generic driver on Linux.
>
>> - RtlCreateUnicodeStringFromAsciiz( &nameW, "FirstBusTimeScanInMs" );
>> + static const WCHAR bus_scan_timeW[] =
>> {'F','i','r','s','t','B','u','s','S','c','a','n','T','i','m','e','I','n','M','s',0};
>>
> These do not match.
You're right, will fix.
>
>>
>> + if (devtype)
>> + {
>> + if (!(type = p_libhal_device_get_property_string( ctx, udi,
>> "storage.drive_type",&error )))
>> + *devtype = ~0;
>> + else if (!strcmp( type, "disk" ) || !strcmp( type, "floppy" ))
>> + *devtype = 0x00;
>> + else if (!strcmp( type, "tape" ))
>> + *devtype = 0x01;
>> + else if (!strcmp( type, "cdrom" ))
>> + *devtype = 0x05;
>> + else if (!strcmp( type, "raid" ))
>> + *devtype = 0x0C;
>> + else
>> + *devtype = ~0;
>> + }
> Please don't use magic numbers here.
OK.
> Also these numbers are wrong. From
> winbase.h:
> #define DRIVE_UNKNOWN 0
> #define DRIVE_NO_ROOT_DIR 1
> #define DRIVE_REMOVABLE 2
> #define DRIVE_FIXED 3
> #define DRIVE_REMOTE 4
> /* Win32 additions */
> #define DRIVE_CDROM 5
> #define DRIVE_RAMDISK 6
The numbers I used are actually the SCSI peripheral device type numbers.
I use them in create_scsi_entry() to figure out which one of the
"*Peripheral" strings to put in the registry. But yeah, I probably
shouldn't use magic numbers like that.
>
> Missing "DeviceName"="Cdrom0" for cdroms.
You only get a DeviceName if there's a disk in the drive (a limitation
of the way mountmgr works).
>
> Also names of devices do not match. This can potentially break some
> software:
> -"Identifier"="ATA Hitachi HDS72202JKAO"
> +"Identifier"="ATA Hitachi HDS72202"
> -"Identifier"="ATA WDC WD7500AAKS-030.0"
> +"Identifier"="ATA WDC WD7500AAKS-0"
OK, I can fix these.
> -"Identifier"="SAMSUNG DVDWBD SH-B083L SB01"
> +"Identifier"="SAMSUNG DVDWBD SH-B083L"
Can't fix that. HAL provides no way to query the SCSI revision of a SCSI
device. Short of actually sending an INQUIRY SCSI command to the device,
I don't know how to fix that.
Thanks.
Chip
More information about the wine-devel
mailing list