[2/2] wined3d: Take abs() of vertex z coordinate as FFP fog coordinate (try 6)
Joachim Priesner
joachim.priesner at web.de
Fri Nov 7 15:39:22 CST 2014
Take the absolute value of vertex.z as fog coordinate instead of just
the z coordinate. This fixes e.g. fog for applications that use
right-handed projection matrices.
Also test the clamp behavior of the oFog vertex shader output.
Tested on openSuse 13.1 and Windows 8.1 (VMware Player).
Try 6: Move the vertex declaration before the vertex shader code in
the d3d8 test.
---
dlls/d3d8/tests/visual.c | 297 +++++++++++++++++++++++++++++++++++++
dlls/d3d9/tests/visual.c | 360 +++++++++++++++++++++++++++++++++++++++++++++
dlls/ddraw/tests/ddraw7.c | 161 ++++++++++++++++++++
dlls/wined3d/glsl_shader.c | 2 +-
4 files changed, 819 insertions(+), 1 deletion(-)
diff --git a/dlls/d3d8/tests/visual.c b/dlls/d3d8/tests/visual.c
index 163110c..7b9ee5f 100644
--- a/dlls/d3d8/tests/visual.c
+++ b/dlls/d3d8/tests/visual.c
@@ -696,6 +696,302 @@ done:
DestroyWindow(window);
}
+/* This test tests fog in combination with negative vertex z coordinates. */
+static void fog_negative_z_test(void)
+{
+ enum
+ {
+ C_ALPHA_0x00 = 0x00000000,
+ C_CLEAR = 0xffff00ff,
+ C_FOGGED = 0x0000ff00,
+ C_HALF_FOGGED = 0x00808000,
+ C_UNFOGGED = 0x00ff0000,
+ C_CLAMPED_FOG = 0xdeadbeef /* triggers special codepath when used as middle_color */
+ };
+
+ /* Fill the null-shader entry with the FVF (SetVertexShader is "overloaded" on d3d8). */
+ DWORD vertex_shader[3] = {D3DFVF_XYZ | D3DFVF_DIFFUSE | D3DFVF_SPECULAR, 0, 0};
+ DWORD pixel_shader[2] = {0, 0};
+ IDirect3D8 *d3d;
+ IDirect3DDevice8 *device;
+ BOOL has_vs_support, has_ps_support, has_table_fog_support;
+ unsigned int i, ps, y;
+ D3DCOLOR color, expected_middle_color;
+ ULONG refcount;
+ D3DCAPS8 caps;
+ HWND window;
+ HRESULT hr;
+
+ static const DWORD vertex_decl[] =
+ {
+ D3DVSD_STREAM(0),
+ D3DVSD_REG(0, D3DVSDT_FLOAT3), /* position, v0 */
+ D3DVSD_REG(1, D3DVSDT_D3DCOLOR), /* diffuse color, v1 */
+ D3DVSD_REG(2, D3DVSDT_D3DCOLOR), /* specular color, v2 */
+ D3DVSD_CONST(0, 1), 0x3f000000, 0x00000000, 0x00000000, 0x00000000, /* def c0, 0.5, 0, 0, 0 */
+ D3DVSD_END()
+ };
+
+ /* Basic vertex shader without fog computation ("non foggy") */
+ static const DWORD vertex_shader_code1[] =
+ {
+ 0xfffe0100, /* vs_1_0 */
+ /* output.Pos.z = input.Pos.z * 0.5 + 0.5 */
+ 0x00000005, 0x80010000, 0x90aa0000, 0xa0000000, /* mul r0.x, v0.z, c0.x */
+ 0x00000002, 0xc0040000, 0x80000000, 0xa0000000, /* add oPos.z, r0.x c0.x */
+ /* output.Pos.xyw = input.Pos.xyw */
+ 0x00000001, 0xc00b0000, 0x90e40000, /* mov oPos.xyw, v0 */
+ /* output.Color = input.Color */
+ 0x00000001, 0xd00f0000, 0x90e40001, /* mov oD0, v1 */
+ 0x0000ffff, /* END */
+ };
+
+ /* Basic vertex shader with fog computation ("foggy"). Outputs the z coordinate of the vertex
+ * as its fog intensity value. */
+ static const DWORD vertex_shader_code2[] =
+ {
+ 0xfffe0100, /* vs_1_0 */
+ /* output.Pos.z = input.Pos.z * 0.5 + 0.5 */
+ 0x00000005, 0x80010000, 0x90aa0000, 0xa0000000, /* mul r0.x, v0.z, c0.x */
+ 0x00000002, 0xc0040000, 0x80000000, 0xa0000000, /* add oPos.z, r0.x c0.x */
+ /* output.Pos.xyw = input.Pos.xyw */
+ 0x00000001, 0xc00b0000, 0x90e40000, /* mov oPos.xyw, v0 */
+ /* output.Color = input.Color */
+ 0x00000001, 0xd00f0000, 0x90e40001, /* mov oD0, v1 */
+ /* output.Fog = input.Pos.z */
+ 0x00000001, 0xc00f0001, 0x90aa0000, /* mov oFog, v0.z */
+ 0x0000ffff, /* END */
+ };
+
+ /* Basic pixel shader */
+ static const DWORD pixel_shader_code[] =
+ {
+ 0xffff0101, /* ps_1_1 */
+ 0x00000001, 0x800f0000, 0x90e40000, /* mov r0, v0 */
+ 0x0000ffff
+ };
+
+ static const struct
+ {
+ struct vec3 position;
+ DWORD diffuse;
+ DWORD specular;
+ }
+ top_quad[] =
+ {
+ {{-1.0f, -1.0f, -1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{-1.0f, 0.0f, -1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 1.0f, -1.0f, 1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 1.0f, 0.0f, 1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ },
+ bottom_quad_1[] =
+ {
+ {{-1.0f, 0.0f, -1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{-1.0f, 1.0f, -1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 0.0f, 0.0f, 0.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 0.0f, 1.0f, 0.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ },
+ bottom_quad_2[] =
+ {
+ {{ 0.0f, 0.0f, 0.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 0.0f, 1.0f, 0.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 1.0f, 0.0f, 1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 1.0f, 1.0f, 1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ };
+ static const struct
+ {
+ int vshader;
+ D3DFOGMODE vfog;
+ D3DFOGMODE tfog;
+ DWORD color_left;
+ DWORD color_middle_top;
+ DWORD color_middle_bottom;
+ DWORD color_right;
+ }
+ test_data[] =
+ {
+ /* Using z-based fog, the bottom quad should have a gradient UNFOGGED->FOGGED
+ * for table fog, and be completely fogged for vertex fog.
+ * When the fog coordinate returned by the vertex shader is used instead,
+ * the result is a gradient FOGGED->UNFOGGED. */
+
+ /* No vertex shader */
+ {0, D3DFOG_NONE, D3DFOG_LINEAR, C_UNFOGGED, C_HALF_FOGGED, C_HALF_FOGGED, C_FOGGED},
+ {0, D3DFOG_LINEAR, D3DFOG_LINEAR, C_UNFOGGED, C_HALF_FOGGED, C_HALF_FOGGED, C_FOGGED},
+ {0, D3DFOG_LINEAR, D3DFOG_NONE, C_FOGGED, C_UNFOGGED, C_FOGGED, C_FOGGED},
+ {0, D3DFOG_NONE, D3DFOG_NONE, C_FOGGED, C_FOGGED, C_FOGGED, C_FOGGED},
+
+ /* Vertex shader without vertex fog computation */
+ {1, D3DFOG_NONE, D3DFOG_LINEAR, C_UNFOGGED, C_HALF_FOGGED, C_HALF_FOGGED, C_FOGGED},
+ {1, D3DFOG_LINEAR, D3DFOG_LINEAR, C_UNFOGGED, C_HALF_FOGGED, C_HALF_FOGGED, C_FOGGED},
+ {1, D3DFOG_LINEAR, D3DFOG_NONE, C_FOGGED, C_FOGGED, C_FOGGED, C_FOGGED},
+ {1, D3DFOG_NONE, D3DFOG_NONE, C_FOGGED, C_FOGGED, C_FOGGED, C_FOGGED},
+
+ /* Vertex shader with vertex fog computation.
+ * As drivers inconsistently clamp or don't clamp the oFog output of vertex shaders,
+ * the special value C_CLAMPED_FOG allows both C_HALF_FOGGED (clamped) and C_FOGGED. */
+ {2, D3DFOG_NONE, D3DFOG_LINEAR, C_UNFOGGED, C_HALF_FOGGED, C_HALF_FOGGED, C_FOGGED},
+ {2, D3DFOG_LINEAR, D3DFOG_LINEAR, C_UNFOGGED, C_HALF_FOGGED, C_HALF_FOGGED, C_FOGGED},
+ {2, D3DFOG_LINEAR, D3DFOG_NONE, C_FOGGED, C_FOGGED, C_CLAMPED_FOG, C_UNFOGGED},
+ {2, D3DFOG_NONE, D3DFOG_NONE, C_FOGGED, C_FOGGED, C_CLAMPED_FOG, C_UNFOGGED},
+ };
+ /* Affine projection matrix for z-near = -1, z-far = 1.
+ * Note that for the tests with vertex shaders, this matrix is hard-coded in the shaders. */
+ static const D3DMATRIX proj_mat =
+ {{{
+ 1.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 1.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.5f, 0.0f,
+ 0.0f, 0.0f, 0.5f, 1.0f
+ }}};
+
+ window = CreateWindowA("static", "d3d8_test", WS_OVERLAPPEDWINDOW | WS_VISIBLE,
+ 0, 0, 640, 480, NULL, NULL, NULL, NULL);
+ d3d = Direct3DCreate8(D3D_SDK_VERSION);
+ ok(!!d3d, "Failed to create a D3D object\n");
+ if (!(device = create_device(d3d, window, window, TRUE)))
+ {
+ skip("Failed to create a D3D device, skipping tests\n");
+ goto done;
+ }
+
+ hr = IDirect3DDevice8_GetDeviceCaps(device, &caps);
+ ok(SUCCEEDED(hr), "Failed to get device caps (%#x)\n", hr);
+
+ has_table_fog_support = caps.RasterCaps & D3DPRASTERCAPS_FOGTABLE;
+ if (!has_table_fog_support)
+ skip("No table fog support, skipping some fog tests\n");
+
+ has_ps_support = caps.PixelShaderVersion >= D3DPS_VERSION(1, 1);
+ if (has_ps_support)
+ {
+ hr = IDirect3DDevice8_CreatePixelShader(device, pixel_shader_code, &pixel_shader[1]);
+ ok(SUCCEEDED(hr), "CreatePixelShader failed (%#x)\n", hr);
+ }
+ else
+ {
+ skip("No ps_1_1 support, skipping some fog tests\n");
+ }
+
+ has_vs_support = caps.VertexShaderVersion >= D3DVS_VERSION(1, 0);
+ if (has_vs_support)
+ {
+ hr = IDirect3DDevice8_CreateVertexShader(device, vertex_decl, vertex_shader_code1, &vertex_shader[1], 0);
+ ok(SUCCEEDED(hr), "CreateVertexShader failed (%#x)\n", hr);
+ hr = IDirect3DDevice8_CreateVertexShader(device, vertex_decl, vertex_shader_code2, &vertex_shader[2], 0);
+ ok(SUCCEEDED(hr), "CreateVertexShader failed (%#x)\n", hr);
+ }
+ else
+ {
+ skip("No vs_1_0 support, skipping some fog tests\n");
+ }
+
+ /* Setup initial states: No depth test, no lighting, fog on, fog color */
+ hr = IDirect3DDevice8_SetRenderState(device, D3DRS_ZENABLE, D3DZB_FALSE);
+ ok(SUCCEEDED(hr), "Turning off depth test failed (%#x)\n", hr);
+ hr = IDirect3DDevice8_SetRenderState(device, D3DRS_LIGHTING, FALSE);
+ ok(SUCCEEDED(hr), "Turning off lighting failed (%#x)\n", hr);
+ hr = IDirect3DDevice8_SetRenderState(device, D3DRS_FOGENABLE, TRUE);
+ ok(SUCCEEDED(hr), "Turning on fog calculations failed (%#x)\n", hr);
+ hr = IDirect3DDevice8_SetRenderState(device, D3DRS_FOGCOLOR, C_FOGGED);
+ ok(SUCCEEDED(hr), "Setting fog color failed (%#x)\n", hr);
+
+ hr = IDirect3DDevice8_SetTransform(device, D3DTS_PROJECTION, &proj_mat);
+ ok(SUCCEEDED(hr), "Failed to set projection transform (%#x)\n", hr);
+
+ for (i = 0; i < sizeof(test_data)/sizeof(test_data[0]); i++)
+ {
+ if (test_data[i].vshader != 0 && !vertex_shader[test_data[i].vshader])
+ continue;
+ if (test_data[i].tfog != D3DFOG_NONE && !has_table_fog_support)
+ continue;
+
+ hr = IDirect3DDevice8_SetVertexShader(device, vertex_shader[test_data[i].vshader]);
+ ok(SUCCEEDED(hr), "SetVertexShader failed (%#x)\n", hr);
+
+ for (ps = 0; ps < sizeof(pixel_shader)/sizeof(pixel_shader[0]); ps++)
+ {
+ if (ps != 0 && !pixel_shader[ps])
+ continue;
+
+ if (has_ps_support)
+ {
+ hr = IDirect3DDevice8_SetPixelShader(device, pixel_shader[ps]);
+ ok(SUCCEEDED(hr), "SetPixelShader failed (%#x)\n", hr);
+ }
+
+ hr = IDirect3DDevice8_SetRenderState(device, D3DRS_FOGVERTEXMODE, test_data[i].vfog);
+ ok(SUCCEEDED(hr), "Setting fog vertex mode to %d failed (%#x)\n", test_data[i].vfog, hr);
+ hr = IDirect3DDevice8_SetRenderState(device, D3DRS_FOGTABLEMODE, test_data[i].tfog);
+ ok(SUCCEEDED(hr), "Setting fog table mode to %d failed (%#x)\n", test_data[i].tfog, hr);
+
+ hr = IDirect3DDevice8_Clear(device, 0, NULL, D3DCLEAR_TARGET, C_CLEAR, 1.0f, 0);
+ ok(SUCCEEDED(hr), "Clear failed (%#x)\n", hr);
+ hr = IDirect3DDevice8_BeginScene(device);
+ ok(SUCCEEDED(hr), "BeginScene failed (%#x)\n", hr);
+ hr = IDirect3DDevice8_DrawPrimitiveUP(
+ device, D3DPT_TRIANGLESTRIP, 2, &top_quad[0], sizeof(top_quad[0]));
+ ok(SUCCEEDED(hr), "DrawPrimitiveUP failed (%#x)\n", hr);
+ hr = IDirect3DDevice8_DrawPrimitiveUP(
+ device, D3DPT_TRIANGLESTRIP, 2, &bottom_quad_1[0], sizeof(bottom_quad_1[0]));
+ ok(SUCCEEDED(hr), "DrawPrimitiveUP failed (%#x)\n", hr);
+ hr = IDirect3DDevice8_DrawPrimitiveUP(
+ device, D3DPT_TRIANGLESTRIP, 2, &bottom_quad_2[0], sizeof(bottom_quad_2[0]));
+ ok(SUCCEEDED(hr), "DrawPrimitiveUP failed (%#x)\n", hr);
+ hr = IDirect3DDevice8_EndScene(device);
+ ok(SUCCEEDED(hr), "EndScene failed (%#x)\n", hr);
+
+ /* Use 5% tolerance on the colors since there may be a gradient
+ * between left and right vertices. */
+ for (y = 120; y <= 360; y += 240)
+ {
+ color = getPixelColor(device, 2, y);
+ ok(color_match(color, test_data[i].color_left, 13),
+ "fog vs%i ps%i fvm%i ftm%i, y=%i: got left color %08x, expected %08x+-5%%\n",
+ test_data[i].vshader, ps, test_data[i].vfog, test_data[i].tfog, y,
+ color, test_data[i].color_left);
+ color = getPixelColor(device, 320, y);
+ expected_middle_color =
+ y == 120 ? test_data[i].color_middle_top : test_data[i].color_middle_bottom;
+ if (expected_middle_color == C_CLAMPED_FOG)
+ {
+ ok(color_match(color, C_HALF_FOGGED, 13) || color_match(color, C_FOGGED, 13),
+ "fog vs%i ps%i fvm%i ftm%i, y=%i: got middle color %08x, "
+ "expected %08x+-5%% or %08x+-5%%\n",
+ test_data[i].vshader, ps, test_data[i].vfog, test_data[i].tfog, y,
+ color, C_HALF_FOGGED, C_FOGGED);
+ }
+ else
+ {
+ ok(color_match(color, expected_middle_color, 13),
+ "fog vs%i ps%i fvm%i ftm%i, y=%i: got middle color %08x, expected %08x+-5%%\n",
+ test_data[i].vshader, ps, test_data[i].vfog, test_data[i].tfog, y,
+ color, expected_middle_color);
+ }
+ color = getPixelColor(device, 638, y);
+ ok(color_match(color, test_data[i].color_right, 13),
+ "fog vs%i ps%i fvm%i ftm%i, y=%i: got right color %08x, expected %08x+-5%%\n",
+ test_data[i].vshader, ps, test_data[i].vfog, test_data[i].tfog, y,
+ color, test_data[i].color_right);
+ }
+
+ hr = IDirect3DDevice8_Present(device, NULL, NULL, NULL, NULL);
+ ok(SUCCEEDED(hr), "Present failed (%#x)\n", hr);
+ }
+ }
+ for (i = 0; i < sizeof(vertex_shader)/sizeof(vertex_shader[0]); i++)
+ if (vertex_shader[i])
+ IDirect3DDevice8_DeleteVertexShader(device, vertex_shader[i]);
+ for (i = 0; i < sizeof(pixel_shader)/sizeof(pixel_shader[0]); i++)
+ if (pixel_shader[i])
+ IDirect3DDevice8_DeletePixelShader(device, pixel_shader[i]);
+ refcount = IDirect3DDevice8_Release(device);
+ ok(!refcount, "Device has %u references left\n", refcount);
+done:
+ IDirect3D8_Release(d3d);
+ DestroyWindow(window);
+}
+
/* This tests fog in combination with shaders.
* What's tested: linear fog (vertex and table) with pixel shader
* linear table fog with non foggy vertex shader
@@ -5092,6 +5388,7 @@ START_TEST(visual)
offscreen_test();
alpha_test();
test_scalar_instructions();
+ fog_negative_z_test();
fog_with_shader_test();
cnd_test();
p8_texture_test();
diff --git a/dlls/d3d9/tests/visual.c b/dlls/d3d9/tests/visual.c
index 117c8eb..f8ac3a6 100644
--- a/dlls/d3d9/tests/visual.c
+++ b/dlls/d3d9/tests/visual.c
@@ -1825,6 +1825,365 @@ done:
DestroyWindow(window);
}
+/* This test tests fog in combination with negative vertex z coordinates. */
+static void fog_negative_z_test(void)
+{
+ enum
+ {
+ C_ALPHA_0x00 = 0x00000000,
+ C_CLEAR = 0xffff00ff,
+ C_FOGGED = 0x0000ff00,
+ C_HALF_FOGGED = 0x00808000,
+ C_UNFOGGED = 0x00ff0000,
+ C_CLAMPED_FOG = 0xdeadbeef /* triggers special codepath when used as middle_color */
+ };
+
+ IDirect3DVertexShader9 *vertex_shader[4] = {NULL, NULL, NULL, NULL};
+ IDirect3DPixelShader9 *pixel_shader[3] = {NULL, NULL, NULL};
+ IDirect3DVertexDeclaration9 *vertex_declaration = NULL;
+ IDirect3DDevice9 *device;
+ BOOL has_vs_support, has_ps_support, has_table_fog_support, is_fog_vertex_clamped;
+ unsigned int i, ps, y;
+ IDirect3D9 *d3d;
+ ULONG refcount;
+ D3DCAPS9 caps;
+ DWORD color, expected_middle_color;
+ HWND window;
+ HRESULT hr;
+
+ /* Basic vertex shader without fog computation ("non foggy") */
+ static const DWORD vertex_shader_code1[] =
+ {
+ 0xfffe0101, /* vs_1_1 */
+ 0x00000051, 0xa00f0000, 0x3f000000, 0x00000000, 0x00000000, 0x00000000, /* def c0, 0.5, 0, 0, 0 */
+ 0x0000001f, 0x80000000, 0x900f0000, /* dcl_position0 v0 */
+ 0x0000001f, 0x8000000a, 0x900f0001, /* dcl_color0 v1 */
+ /* output.Pos.z = input.Pos.z * 0.5 + 0.5 */
+ 0x00000005, 0x80010000, 0x90aa0000, 0xa0000000, /* mul r0.x, v0.z, c0.x */
+ 0x00000002, 0xc0040000, 0x80000000, 0xa0000000, /* add oPos.z, r0.x c0.x */
+ /* output.Pos.xyw = input.Pos.xyw */
+ 0x00000001, 0xc00b0000, 0x90e40000, /* mov oPos.xyw, v0 */
+ /* output.Color = input.Color */
+ 0x00000001, 0xd00f0000, 0x90e40001, /* mov oD0, v1 */
+ 0x0000ffff, /* END */
+ };
+
+ /* Basic vertex shader with fog computation ("foggy"). Outputs the z coordinate of the vertex
+ * as its fog intensity value. */
+ static const DWORD vertex_shader_code2[] =
+ {
+ 0xfffe0101, /* vs_1_1 */
+ 0x00000051, 0xa00f0000, 0x3f000000, 0x00000000, 0x00000000, 0x00000000, /* def c0, 0.5, 0, 0, 0 */
+ 0x0000001f, 0x80000000, 0x900f0000, /* dcl_position0 v0 */
+ 0x0000001f, 0x8000000a, 0x900f0001, /* dcl_color0 v1 */
+ /* output.Pos.z = input.Pos.z * 0.5 + 0.5 */
+ 0x00000005, 0x80010000, 0x90aa0000, 0xa0000000, /* mul r0.x, v0.z, c0.x */
+ 0x00000002, 0xc0040000, 0x80000000, 0xa0000000, /* add oPos.z, r0.x c0.x */
+ /* output.Pos.xyw = input.Pos.xyw */
+ 0x00000001, 0xc00b0000, 0x90e40000, /* mov oPos.xyw, v0 */
+ /* output.Color = input.Color */
+ 0x00000001, 0xd00f0000, 0x90e40001, /* mov oD0, v1 */
+ /* output.Fog = input.Pos.z */
+ 0x00000001, 0xc00f0001, 0x90aa0000, /* mov oFog, v0.z */
+ 0x0000ffff, /* END */
+ };
+
+ /* Basic vertex shader with fog computation ("foggy"), vs_2_0 */
+ static const DWORD vertex_shader_code3[] =
+ {
+ 0xfffe0200, /* vs_2_0 */
+ 0x05000051, 0xa00f0000, 0x3f000000, 0x00000000, 0x00000000, 0x00000000, /* def c0, 0.5, 0, 0, 0 */
+ 0x0200001f, 0x80000000, 0x900f0000, /* dcl_position0 v0 */
+ 0x0200001f, 0x8000000a, 0x900f0001, /* dcl_color0 v1 */
+ /* output.Pos.z = input.Pos.z * 0.5 + 0.5 */
+ 0x03000005, 0x80010000, 0x90aa0000, 0xa0000000, /* mul r0.x, v0.z, c0.x */
+ 0x03000002, 0xc0040000, 0x80000000, 0xa0000000, /* add oPos.z, r0.x c0.x */
+ /* output.Pos.xyw = input.Pos.xyw */
+ 0x02000001, 0xc00b0000, 0x90e40000, /* mov oPos.xyw, v0 */
+ /* output.Color = input.Color */
+ 0x02000001, 0xd00f0000, 0x90e40001, /* mov oD0, v1 */
+ /* output.Fog = input.Pos.z */
+ 0x02000001, 0xc00f0001, 0x90aa0000, /* mov oFog, v0.z */
+ 0x0000ffff, /* END */
+ };
+
+ /* Basic pixel shader */
+ static const DWORD pixel_shader_code[] =
+ {
+ 0xffff0101, /* ps_1_1 */
+ 0x00000001, 0x800f0000, 0x90e40000, /* mov r0, v0 */
+ 0x0000ffff
+ };
+ static const DWORD pixel_shader_code2[] =
+ {
+ 0xffff0200, /* ps_2_0 */
+ 0x0200001f, 0x80000000, 0x900f0000, /* dcl v0 */
+ 0x02000001, 0x800f0800, 0x90e40000, /* mov oC0, v0 */
+ 0x0000ffff
+ };
+ static const struct
+ {
+ struct vec3 position;
+ D3DCOLOR diffuse;
+ D3DCOLOR specular;
+ }
+ top_quad[] =
+ {
+ {{-1.0f, -1.0f, -1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{-1.0f, 0.0f, -1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 1.0f, -1.0f, 1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 1.0f, 0.0f, 1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ },
+ bottom_quad_1[] =
+ {
+ {{-1.0f, 0.0f, -1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{-1.0f, 1.0f, -1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 0.0f, 0.0f, 0.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 0.0f, 1.0f, 0.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ },
+ bottom_quad_2[] =
+ {
+ {{ 0.0f, 0.0f, 0.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 0.0f, 1.0f, 0.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 1.0f, 0.0f, 1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 1.0f, 1.0f, 1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ };
+
+ static const D3DVERTEXELEMENT9 decl_elements[] =
+ {
+ {0, 0, D3DDECLTYPE_FLOAT3, D3DDECLMETHOD_DEFAULT, D3DDECLUSAGE_POSITION, 0},
+ {0, 12, D3DDECLTYPE_D3DCOLOR, D3DDECLMETHOD_DEFAULT, D3DDECLUSAGE_COLOR, 0}, /* diffuse */
+ {0, 16, D3DDECLTYPE_D3DCOLOR, D3DDECLMETHOD_DEFAULT, D3DDECLUSAGE_COLOR, 1}, /* specular */
+ D3DDECL_END()
+ };
+ static const struct
+ {
+ int vshader;
+ D3DFOGMODE vfog;
+ D3DFOGMODE tfog;
+ DWORD color_left;
+ DWORD color_middle_top;
+ DWORD color_middle_bottom;
+ DWORD color_right;
+ }
+ test_data[] =
+ {
+ /* Using z-based fog, the bottom quad should have a gradient UNFOGGED->FOGGED
+ * for table fog, and be completely fogged for vertex fog.
+ * When the fog coordinate returned by the vertex shader is used instead,
+ * the result is a gradient FOGGED->UNFOGGED in the right half of the screen.
+ *
+ * C_CLAMPED_FOG will be replaced by the correct expected value based on
+ * the value of D3DPMISCCAPS_FOGVERTEXCLAMPED. If the driver clamps the oFog
+ * output of vertex shaders, it should be C_HALF_FOGGED, else C_FOGGED. */
+
+ /* No vertex shader */
+ {0, D3DFOG_NONE, D3DFOG_LINEAR, C_UNFOGGED, C_HALF_FOGGED, C_HALF_FOGGED, C_FOGGED},
+ {0, D3DFOG_LINEAR, D3DFOG_LINEAR, C_UNFOGGED, C_HALF_FOGGED, C_HALF_FOGGED, C_FOGGED},
+ {0, D3DFOG_LINEAR, D3DFOG_NONE, C_FOGGED, C_UNFOGGED, C_FOGGED, C_FOGGED},
+ {0, D3DFOG_NONE, D3DFOG_NONE, C_FOGGED, C_FOGGED, C_FOGGED, C_FOGGED},
+
+ /* Vertex shader without vertex fog computation */
+ {1, D3DFOG_NONE, D3DFOG_LINEAR, C_UNFOGGED, C_HALF_FOGGED, C_HALF_FOGGED, C_FOGGED},
+ {1, D3DFOG_LINEAR, D3DFOG_LINEAR, C_UNFOGGED, C_HALF_FOGGED, C_HALF_FOGGED, C_FOGGED},
+ {1, D3DFOG_LINEAR, D3DFOG_NONE, C_FOGGED, C_FOGGED, C_FOGGED, C_FOGGED},
+ {1, D3DFOG_NONE, D3DFOG_NONE, C_FOGGED, C_FOGGED, C_FOGGED, C_FOGGED},
+
+ /* Vertex shader vs_1_1 with vertex fog computation */
+ {2, D3DFOG_NONE, D3DFOG_LINEAR, C_UNFOGGED, C_HALF_FOGGED, C_HALF_FOGGED, C_FOGGED},
+ {2, D3DFOG_LINEAR, D3DFOG_LINEAR, C_UNFOGGED, C_HALF_FOGGED, C_HALF_FOGGED, C_FOGGED},
+ {2, D3DFOG_LINEAR, D3DFOG_NONE, C_FOGGED, C_FOGGED, C_CLAMPED_FOG, C_UNFOGGED},
+ {2, D3DFOG_NONE, D3DFOG_NONE, C_FOGGED, C_FOGGED, C_CLAMPED_FOG, C_UNFOGGED},
+
+ /* Vertex shader vs_2_0 with vertex fog computation */
+ {3, D3DFOG_NONE, D3DFOG_LINEAR, C_UNFOGGED, C_HALF_FOGGED, C_HALF_FOGGED, C_FOGGED},
+ {3, D3DFOG_LINEAR, D3DFOG_LINEAR, C_UNFOGGED, C_HALF_FOGGED, C_HALF_FOGGED, C_FOGGED},
+ {3, D3DFOG_LINEAR, D3DFOG_NONE, C_FOGGED, C_FOGGED, C_CLAMPED_FOG, C_UNFOGGED},
+ {3, D3DFOG_NONE, D3DFOG_NONE, C_FOGGED, C_FOGGED, C_CLAMPED_FOG, C_UNFOGGED},
+ };
+ /* Affine projection matrix for z-near = -1, z-far = 1.
+ * Note that for the tests with vertex shaders, this matrix is hard-coded in the shaders. */
+ static const D3DMATRIX proj_mat =
+ {{{
+ 1.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 1.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.5f, 0.0f,
+ 0.0f, 0.0f, 0.5f, 1.0f,
+ }}};
+
+ window = CreateWindowA("static", "d3d9_test", WS_OVERLAPPEDWINDOW | WS_VISIBLE,
+ 0, 0, 640, 480, NULL, NULL, NULL, NULL);
+ d3d = Direct3DCreate9(D3D_SDK_VERSION);
+ ok(!!d3d, "Failed to create a D3D object\n");
+ if (!(device = create_device(d3d, window, window, TRUE)))
+ {
+ skip("Failed to create a D3D device, skipping tests\n");
+ goto done;
+ }
+
+ hr = IDirect3DDevice9_GetDeviceCaps(device, &caps);
+ ok(SUCCEEDED(hr), "Failed to get device caps (%#x)\n", hr);
+
+ has_table_fog_support = caps.RasterCaps & D3DPRASTERCAPS_FOGTABLE;
+ if (!has_table_fog_support)
+ skip("No table fog support, skipping some fog tests\n");
+
+ has_vs_support = caps.VertexShaderVersion >= D3DVS_VERSION(1, 1);
+ if (has_vs_support)
+ {
+ hr = IDirect3DDevice9_CreateVertexShader(device, vertex_shader_code1, &vertex_shader[1]);
+ ok(SUCCEEDED(hr), "CreateVertexShader failed (%#x)\n", hr);
+ hr = IDirect3DDevice9_CreateVertexShader(device, vertex_shader_code2, &vertex_shader[2]);
+ ok(SUCCEEDED(hr), "CreateVertexShader failed (%#x)\n", hr);
+
+ if (caps.VertexShaderVersion >= D3DVS_VERSION(2, 0))
+ {
+ hr = IDirect3DDevice9_CreateVertexShader(device, vertex_shader_code3, &vertex_shader[3]);
+ ok(SUCCEEDED(hr), "CreateVertexShader failed (%#x)\n", hr);
+ }
+ else
+ {
+ skip("No vs_2_0 support, skipping some fog tests\n");
+ }
+ }
+ else
+ {
+ skip("No vs_1_1 support, skipping some fog tests\n");
+ }
+
+ has_ps_support = caps.PixelShaderVersion >= D3DPS_VERSION(1, 1);
+ if (has_ps_support)
+ {
+ hr = IDirect3DDevice9_CreatePixelShader(device, pixel_shader_code, &pixel_shader[1]);
+ ok(SUCCEEDED(hr), "CreatePixelShader failed (%#x)\n", hr);
+
+ if (caps.PixelShaderVersion >= D3DPS_VERSION(2, 0))
+ {
+ hr = IDirect3DDevice9_CreatePixelShader(device, pixel_shader_code2, &pixel_shader[2]);
+ ok(SUCCEEDED(hr), "CreatePixelShader failed (%#x)\n", hr);
+ }
+ else
+ {
+ skip("No ps_2_0 support, skipping some fog tests\n");
+ }
+ }
+ else
+ {
+ skip("No ps_1_1 support, skipping some fog tests\n");
+ }
+
+ is_fog_vertex_clamped = caps.PrimitiveMiscCaps & D3DPMISCCAPS_FOGVERTEXCLAMPED;
+
+ hr = IDirect3DDevice9_CreateVertexDeclaration(device, decl_elements, &vertex_declaration);
+ ok(SUCCEEDED(hr), "CreateVertexDeclaration failed (%#x)\n", hr);
+
+ /* Setup initial states: No depth test, no lighting, fog on, fog color */
+ hr = IDirect3DDevice9_SetRenderState(device, D3DRS_ZENABLE, D3DZB_FALSE);
+ ok(SUCCEEDED(hr), "Turning off depth test failed (%#x)\n", hr);
+ hr = IDirect3DDevice9_SetRenderState(device, D3DRS_LIGHTING, FALSE);
+ ok(SUCCEEDED(hr), "Turning off lighting failed (%#x)\n", hr);
+ hr = IDirect3DDevice9_SetRenderState(device, D3DRS_FOGENABLE, TRUE);
+ ok(SUCCEEDED(hr), "Turning on fog calculations failed (%#x)\n", hr);
+ hr = IDirect3DDevice9_SetRenderState(device, D3DRS_FOGCOLOR, C_FOGGED);
+ ok(SUCCEEDED(hr), "Setting fog color failed (%#x)\n", hr);
+ hr = IDirect3DDevice9_SetVertexDeclaration(device, vertex_declaration);
+ ok(SUCCEEDED(hr), "SetVertexDeclaration failed (%#x)\n", hr);
+
+ hr = IDirect3DDevice9_SetTransform(device, D3DTS_PROJECTION, &proj_mat);
+ ok(SUCCEEDED(hr), "Failed to set projection transform (%#x)\n", hr);
+
+ for (i = 0; i < sizeof(test_data)/sizeof(test_data[0]); i++)
+ {
+ if (test_data[i].vshader != 0 && !vertex_shader[test_data[i].vshader])
+ continue;
+ if (test_data[i].tfog != D3DFOG_NONE && !has_table_fog_support)
+ continue;
+
+ if (has_vs_support)
+ {
+ hr = IDirect3DDevice9_SetVertexShader(device, vertex_shader[test_data[i].vshader]);
+ ok(SUCCEEDED(hr), "SetVertexShader failed (%#x)\n", hr);
+ }
+
+ for (ps = 0; ps < sizeof(pixel_shader)/sizeof(pixel_shader[0]); ps++)
+ {
+ if (ps != 0 && !pixel_shader[ps])
+ continue;
+
+ if (has_ps_support)
+ {
+ hr = IDirect3DDevice9_SetPixelShader(device, pixel_shader[ps]);
+ ok(SUCCEEDED(hr), "SetPixelShader failed (%#x)\n", hr);
+ }
+
+ hr = IDirect3DDevice9_SetRenderState(device, D3DRS_FOGVERTEXMODE, test_data[i].vfog);
+ ok(SUCCEEDED(hr), "Setting fog vertex mode to %d failed (%#x)\n", test_data[i].vfog, hr);
+ hr = IDirect3DDevice9_SetRenderState(device, D3DRS_FOGTABLEMODE, test_data[i].tfog);
+ ok(SUCCEEDED(hr), "Setting fog table mode to %d failed (%#x)\n", test_data[i].tfog, hr);
+
+ hr = IDirect3DDevice9_Clear(device, 0, NULL, D3DCLEAR_TARGET, C_CLEAR, 1.0f, 0);
+ ok(SUCCEEDED(hr), "Clear failed (%#x)\n", hr);
+ hr = IDirect3DDevice9_BeginScene(device);
+ ok(SUCCEEDED(hr), "BeginScene failed (%#x)\n", hr);
+ hr = IDirect3DDevice9_DrawPrimitiveUP(
+ device, D3DPT_TRIANGLESTRIP, 2, &top_quad[0], sizeof(top_quad[0]));
+ ok(SUCCEEDED(hr), "DrawPrimitiveUP failed (%#x)\n", hr);
+ hr = IDirect3DDevice9_DrawPrimitiveUP(
+ device, D3DPT_TRIANGLESTRIP, 2, &bottom_quad_1[0], sizeof(bottom_quad_1[0]));
+ ok(SUCCEEDED(hr), "DrawPrimitiveUP failed (%#x)\n", hr);
+ hr = IDirect3DDevice9_DrawPrimitiveUP(
+ device, D3DPT_TRIANGLESTRIP, 2, &bottom_quad_2[0], sizeof(bottom_quad_2[0]));
+ ok(SUCCEEDED(hr), "DrawPrimitiveUP failed (%#x)\n", hr);
+ hr = IDirect3DDevice9_EndScene(device);
+ ok(SUCCEEDED(hr), "EndScene failed (%#x)\n", hr);
+
+ /* Use 5% tolerance on the colors since there may be a gradient
+ * between left and right vertices. */
+ for (y = 120; y <= 360; y += 240)
+ {
+ color = getPixelColor(device, 2, y);
+ ok(color_match(color, test_data[i].color_left, 13),
+ "fog vs%i ps%i fvm%i ftm%i, y=%i: got left color %08x, expected %08x+-5%%\n",
+ test_data[i].vshader, ps, test_data[i].vfog, test_data[i].tfog, y,
+ color, test_data[i].color_left);
+ color = getPixelColor(device, 320, y);
+ expected_middle_color =
+ y == 120 ? test_data[i].color_middle_top : test_data[i].color_middle_bottom;
+ if (expected_middle_color == C_CLAMPED_FOG)
+ {
+ expected_middle_color = is_fog_vertex_clamped ? C_HALF_FOGGED : C_FOGGED;
+ }
+ ok(color_match(color, expected_middle_color, 13),
+ "fog vs%i ps%i fvm%i ftm%i, y=%i: got middle color %08x, expected %08x+-5%%\n",
+ test_data[i].vshader, ps, test_data[i].vfog, test_data[i].tfog, y,
+ color, expected_middle_color);
+ color = getPixelColor(device, 638, y);
+ ok(color_match(color, test_data[i].color_right, 13),
+ "fog vs%i ps%i fvm%i ftm%i, y=%i: got right color %08x, expected %08x+-5%%\n",
+ test_data[i].vshader, ps, test_data[i].vfog, test_data[i].tfog, y,
+ color, test_data[i].color_right);
+
+ }
+
+ hr = IDirect3DDevice9_Present(device, NULL, NULL, NULL, NULL);
+ ok(SUCCEEDED(hr), "Present failed (%#x)\n", hr);
+ }
+ }
+
+ for (i = 0; i < sizeof(vertex_shader)/sizeof(vertex_shader[0]); i++)
+ if (vertex_shader[i])
+ IDirect3DVertexShader9_Release(vertex_shader[i]);
+ for (i = 0; i < sizeof(pixel_shader)/sizeof(pixel_shader[0]); i++)
+ if (pixel_shader[i])
+ IDirect3DPixelShader9_Release(pixel_shader[i]);
+ IDirect3DVertexDeclaration9_Release(vertex_declaration);
+ refcount = IDirect3DDevice9_Release(device);
+ ok(!refcount, "Device has %u references left\n", refcount);
+done:
+ IDirect3D9_Release(d3d);
+ DestroyWindow(window);
+}
+
/* This test tests fog in combination with shaders.
* What's tested: linear fog (vertex and table) with pixel shader
* linear table fog with non foggy vertex shader
@@ -16729,6 +17088,7 @@ START_TEST(visual)
test_vshader_input();
test_vshader_float16();
stream_test();
+ fog_negative_z_test();
fog_with_shader_test();
texbem_test();
texdepth_test();
diff --git a/dlls/ddraw/tests/ddraw7.c b/dlls/ddraw/tests/ddraw7.c
index ec50fb8..4e999f7 100644
--- a/dlls/ddraw/tests/ddraw7.c
+++ b/dlls/ddraw/tests/ddraw7.c
@@ -3384,6 +3384,166 @@ static void test_fog_special(void)
DestroyWindow(window);
}
+/* This test tests fog in combination with negative vertex z coordinates. */
+static void test_fog_negative_z(void)
+{
+ enum
+ {
+ C_ALPHA_0x00 = 0x00000000,
+ C_CLEAR = 0xffff00ff,
+ C_FOGGED = 0x0000ff00,
+ C_HALF_FOGGED = 0x00808000,
+ C_UNFOGGED = 0x00ff0000
+ };
+
+ D3DCOLOR color, expected_middle_color;
+ HRESULT hr;
+ ULONG refcount;
+ BOOL has_table_fog_support;
+ unsigned int i, y;
+ HWND window;
+ IDirect3DDevice7 *device;
+ IDirectDrawSurface7 *rt;
+ D3DDEVICEDESC7 caps;
+
+ static struct
+ {
+ struct vec3 position;
+ D3DCOLOR diffuse;
+ D3DCOLOR specular;
+ }
+ top_quad[] =
+ {
+ {{-1.0f, 0.0f, -1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 1.0f, 0.0f, 1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{-1.0f, -1.0f, -1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 1.0f, -1.0f, 1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ },
+ bottom_quad_1[] =
+ {
+ {{-1.0f, 1.0f, -1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 0.0f, 1.0f, 0.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{-1.0f, 0.0f, -1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 0.0f, 0.0f, 0.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ },
+ bottom_quad_2[] =
+ {
+ {{ 0.0f, 1.0f, 0.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 1.0f, 1.0f, 1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 0.0f, 0.0f, 0.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ {{ 1.0f, 0.0f, 1.0f}, C_UNFOGGED, C_ALPHA_0x00},
+ };
+ static const struct
+ {
+ DWORD vertexmode, tablemode;
+ D3DCOLOR color_left, color_middle_top, color_middle_bottom, color_right;
+ }
+ test_data[] =
+ {
+ {D3DFOG_NONE, D3DFOG_LINEAR, C_UNFOGGED, C_HALF_FOGGED, C_HALF_FOGGED, C_FOGGED},
+ {D3DFOG_LINEAR, D3DFOG_LINEAR, C_UNFOGGED, C_HALF_FOGGED, C_HALF_FOGGED, C_FOGGED},
+ {D3DFOG_LINEAR, D3DFOG_NONE, C_FOGGED, C_UNFOGGED, C_FOGGED, C_FOGGED},
+ {D3DFOG_NONE, D3DFOG_NONE, C_FOGGED, C_FOGGED, C_FOGGED, C_FOGGED},
+ };
+ /* Affine projection matrix for z-near = -1, z-far = 1. */
+ static D3DMATRIX proj_mat =
+ {
+ 1.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 1.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.5f, 0.0f,
+ 0.0f, 0.0f, 0.5f, 1.0f
+ };
+
+ window = CreateWindowA("static", "ddraw_test", WS_OVERLAPPEDWINDOW,
+ 0, 0, 640, 480, 0, 0, 0, 0);
+
+ if (!(device = create_device(window, DDSCL_NORMAL)))
+ {
+ skip("Failed to create a 3D device, skipping test.\n");
+ DestroyWindow(window);
+ return;
+ }
+
+ memset(&caps, 0, sizeof(caps));
+ hr = IDirect3DDevice7_GetCaps(device, &caps);
+ ok(SUCCEEDED(hr), "IDirect3DDevice7_GetCaps failed, hr %#x.\n", hr);
+
+ has_table_fog_support = caps.dpcTriCaps.dwRasterCaps & D3DPRASTERCAPS_FOGTABLE;
+ if (!has_table_fog_support)
+ skip("No table fog support, skipping some fog tests.\n");
+
+ hr = IDirect3DDevice7_GetRenderTarget(device, &rt);
+ ok(SUCCEEDED(hr), "Failed to get render target, hr %#x.\n", hr);
+
+ hr = IDirect3DDevice7_SetRenderState(device, D3DRENDERSTATE_FOGENABLE, TRUE);
+ ok(SUCCEEDED(hr), "Failed to enable fog, hr %#x.\n", hr);
+ hr = IDirect3DDevice7_SetRenderState(device, D3DRENDERSTATE_FOGCOLOR, C_FOGGED);
+ ok(SUCCEEDED(hr), "Failed to set fog color, hr %#x.\n", hr);
+ hr = IDirect3DDevice7_SetRenderState(device, D3DRENDERSTATE_LIGHTING, FALSE);
+ ok(SUCCEEDED(hr), "Failed to disable lighting, hr %#x.\n", hr);
+ hr = IDirect3DDevice7_SetRenderState(device, D3DRENDERSTATE_ZENABLE, D3DZB_FALSE);
+ ok(SUCCEEDED(hr), "Failed to disable depth test, hr %#x.\n", hr);
+
+ hr = IDirect3DDevice7_SetTransform(device, D3DTRANSFORMSTATE_PROJECTION, &proj_mat);
+ ok(SUCCEEDED(hr), "Failed to set projection transform, hr %#x.\n", hr);
+
+ for (i = 0; i < sizeof(test_data)/sizeof(test_data[0]); i++)
+ {
+ if (test_data[i].tablemode != D3DFOG_NONE && !has_table_fog_support)
+ continue;
+
+ hr = IDirect3DDevice7_Clear(device, 0, NULL, D3DCLEAR_TARGET, C_CLEAR, 1.0f, 0);
+ ok(SUCCEEDED(hr), "Failed to clear render target, i=%d, hr %#x.\n", i, hr);
+
+ hr = IDirect3DDevice7_SetRenderState(device, D3DRENDERSTATE_FOGVERTEXMODE, test_data[i].vertexmode);
+ ok(SUCCEEDED(hr), "Failed to set fog vertex mode, i=%d, hr %#x.\n", i, hr);
+ hr = IDirect3DDevice7_SetRenderState(device, D3DRENDERSTATE_FOGTABLEMODE, test_data[i].tablemode);
+ ok(SUCCEEDED(hr), "Failed to set fog table mode, i=%d, hr %#x.\n", i, hr);
+
+ hr = IDirect3DDevice7_BeginScene(device);
+ ok(SUCCEEDED(hr), "Failed to begin scene, i=%d, hr %#x.\n", i, hr);
+ hr = IDirect3DDevice7_DrawPrimitive(device, D3DPT_TRIANGLESTRIP,
+ D3DFVF_XYZ | D3DFVF_DIFFUSE | D3DFVF_SPECULAR, top_quad, 4, 0);
+ ok(SUCCEEDED(hr), "Failed to draw, i=%d, hr %#x.\n", i, hr);
+ hr = IDirect3DDevice7_DrawPrimitive(device, D3DPT_TRIANGLESTRIP,
+ D3DFVF_XYZ | D3DFVF_DIFFUSE | D3DFVF_SPECULAR, bottom_quad_1, 4, 0);
+ ok(SUCCEEDED(hr), "Failed to draw, i=%d, hr %#x.\n", i, hr);
+ hr = IDirect3DDevice7_DrawPrimitive(device, D3DPT_TRIANGLESTRIP,
+ D3DFVF_XYZ | D3DFVF_DIFFUSE | D3DFVF_SPECULAR, bottom_quad_2, 4, 0);
+ ok(SUCCEEDED(hr), "Failed to draw, i=%d, hr %#x.\n", i, hr);
+ hr = IDirect3DDevice7_EndScene(device);
+ ok(SUCCEEDED(hr), "Failed to end scene, i=%d, hr %#x.\n", i, hr);
+
+ /* Use 5% tolerance on the colors since there may be a gradient
+ * between left and right vertices. */
+ for (y = 120; y <= 360; y += 240)
+ {
+ color = get_surface_color(rt, 2, y);
+ ok(compare_color(color, test_data[i].color_left, 13),
+ "fog fvm%i ftm%i y=%i: got left color %08x, expected %08x+-5%%.\n",
+ test_data[i].vertexmode, test_data[i].tablemode, color, y,
+ test_data[i].color_left);
+ color = get_surface_color(rt, 320, y);
+ expected_middle_color =
+ y == 120 ? test_data[i].color_middle_top : test_data[i].color_middle_bottom;
+ ok(compare_color(color, expected_middle_color, 13),
+ "fog fvm%i ftm%i y=%i: got middle color %08x, expected %08x+-5%%.\n",
+ test_data[i].vertexmode, test_data[i].tablemode, y,
+ color, expected_middle_color);
+ color = get_surface_color(rt, 638, y);
+ ok(compare_color(color, test_data[i].color_right, 13),
+ "fog fvm%i ftm%i y=%i: got right color %08x, expected %08x+-5%%.\n",
+ test_data[i].vertexmode, test_data[i].tablemode, y,
+ color, test_data[i].color_right);
+ }
+ }
+
+ IDirectDrawSurface7_Release(rt);
+ refcount = IDirect3DDevice7_Release(device);
+ ok(!refcount, "Device has %u references left.\n", refcount);
+ DestroyWindow(window);
+}
+
static void test_lighting_interface_versions(void)
{
IDirect3DDevice7 *device;
@@ -7671,6 +7831,7 @@ START_TEST(ddraw7)
test_clear_rect_count();
test_coop_level_versions();
test_fog_special();
+ test_fog_negative_z();
test_lighting_interface_versions();
test_coop_level_activateapp();
test_texturemanage();
diff --git a/dlls/wined3d/glsl_shader.c b/dlls/wined3d/glsl_shader.c
index 7379ba2..907e895 100644
--- a/dlls/wined3d/glsl_shader.c
+++ b/dlls/wined3d/glsl_shader.c
@@ -5005,7 +5005,7 @@ static GLhandleARB shader_glsl_generate_ffp_vertex_shader(struct wined3d_shader_
/* Need to undo the [0.0 - 1.0] -> [-1.0 - 1.0] transformation from D3D to GL coordinates. */
shader_addline(buffer, "gl_FogFragCoord = gl_Position.z * 0.5 + 0.5;\n");
else
- shader_addline(buffer, "gl_FogFragCoord = ec_pos.z;\n");
+ shader_addline(buffer, "gl_FogFragCoord = abs(ec_pos.z);\n");
break;
default:
--
1.8.4.5
More information about the wine-patches
mailing list