[PATCH v2 10/11] gdi32: Access several more properties directly from the DC.
Huw Davies
huw at codeweavers.com
Fri Jul 29 09:09:35 CDT 2016
Signed-off-by: Huw Davies <huw at codeweavers.com>
---
dlls/gdi32/bitblt.c | 6 +++---
dlls/gdi32/dib.c | 4 ++--
dlls/gdi32/enhmfdrv/graphics.c | 35 ++++++++++++++++++++---------------
dlls/gdi32/font.c | 18 ++++++++++--------
dlls/gdi32/painting.c | 9 ++++++---
5 files changed, 41 insertions(+), 31 deletions(-)
diff --git a/dlls/gdi32/bitblt.c b/dlls/gdi32/bitblt.c
index 2506c02..ebed7af 100644
--- a/dlls/gdi32/bitblt.c
+++ b/dlls/gdi32/bitblt.c
@@ -300,7 +300,7 @@ BOOL nulldrv_StretchBlt( PHYSDEV dst_dev, struct bitblt_coords *dst,
((src->width != dst->width) || (src->height != dst->height)))
{
copy_bitmapinfo( src_info, dst_info );
- err = stretch_bits( src_info, src, dst_info, dst, &bits, GetStretchBltMode( dst_dev->hdc ));
+ err = stretch_bits( src_info, src, dst_info, dst, &bits, dc_dst->stretchBltMode );
if (!err) err = dst_dev->funcs->pPutImage( dst_dev, 0, dst_info, &bits, src, dst, rop );
}
@@ -933,12 +933,12 @@ BOOL WINAPI GdiAlphaBlend(HDC hdcDst, int xDst, int yDst, int widthDst, int heig
src.log_y = ySrc;
src.log_width = widthSrc;
src.log_height = heightSrc;
- src.layout = GetLayout( hdcSrc );
+ src.layout = dcSrc->layout;
dst.log_x = xDst;
dst.log_y = yDst;
dst.log_width = widthDst;
dst.log_height = heightDst;
- dst.layout = GetLayout( hdcDst );
+ dst.layout = dcDst->layout;
ret = !get_vis_rectangles( dcDst, &dst, dcSrc, &src );
TRACE("src %p log=%d,%d %dx%d phys=%d,%d %dx%d vis=%s dst %p log=%d,%d %dx%d phys=%d,%d %dx%d vis=%s blend=%02x/%02x/%02x/%02x\n",
diff --git a/dlls/gdi32/dib.c b/dlls/gdi32/dib.c
index c47729d..585d2ac 100644
--- a/dlls/gdi32/dib.c
+++ b/dlls/gdi32/dib.c
@@ -600,7 +600,7 @@ INT nulldrv_StretchDIBits( PHYSDEV dev, INT xDst, INT yDst, INT widthDst, INT he
if (err == ERROR_TRANSFORM_NOT_SUPPORTED)
{
copy_bitmapinfo( src_info, dst_info );
- err = stretch_bits( src_info, &src, dst_info, &dst, &src_bits, GetStretchBltMode( dev->hdc ) );
+ err = stretch_bits( src_info, &src, dst_info, &dst, &src_bits, dc->stretchBltMode );
if (!err) err = dev->funcs->pPutImage( dev, NULL, dst_info, &src_bits, &src, &dst, rop );
}
if (err) ret = 0;
@@ -853,7 +853,7 @@ INT nulldrv_SetDIBitsToDevice( PHYSDEV dev, INT x_dst, INT y_dst, DWORD cx, DWOR
dst.y = pt.y;
dst.width = cx;
dst.height = cy;
- if (GetLayout( dev->hdc ) & LAYOUT_RTL) dst.x -= cx - 1;
+ if (dc->layout & LAYOUT_RTL) dst.x -= cx - 1;
rect.left = dst.x;
rect.top = dst.y;
diff --git a/dlls/gdi32/enhmfdrv/graphics.c b/dlls/gdi32/enhmfdrv/graphics.c
index 7aaff9d..68bf4d2 100644
--- a/dlls/gdi32/enhmfdrv/graphics.c
+++ b/dlls/gdi32/enhmfdrv/graphics.c
@@ -69,16 +69,14 @@ static void *store_points( POINTL *dest, const POINT *pts, UINT count, BOOL shor
}
/* compute the bounds of an array of points, optionally including the current position */
-static void get_points_bounds( RECTL *bounds, const POINT *pts, UINT count, HDC hdc )
+static void get_points_bounds( RECTL *bounds, const POINT *pts, UINT count, DC *dc )
{
UINT i;
- if (hdc)
+ if (dc)
{
- POINT cur_pt;
- GetCurrentPositionEx( hdc, &cur_pt );
- bounds->left = bounds->right = cur_pt.x;
- bounds->top = bounds->bottom = cur_pt.y;
+ bounds->left = bounds->right = dc->cur_pos.x;
+ bounds->top = bounds->bottom = dc->cur_pos.y;
}
else if (count)
{
@@ -143,6 +141,7 @@ BOOL EMFDRV_MoveTo(PHYSDEV dev, INT x, INT y)
BOOL EMFDRV_LineTo( PHYSDEV dev, INT x, INT y )
{
EMFDRV_PDEVICE *physDev = get_emf_physdev( dev );
+ DC *dc = get_physdev_dc( dev );
POINT pt;
EMRLINETO emr;
RECTL bounds;
@@ -155,7 +154,7 @@ BOOL EMFDRV_LineTo( PHYSDEV dev, INT x, INT y )
if(!EMFDRV_WriteRecord( dev, &emr.emr ))
return FALSE;
- GetCurrentPositionEx( dev->hdc, &pt );
+ pt = dc->cur_pos;
bounds.left = min(x, pt.x);
bounds.top = min(y, pt.y);
@@ -177,6 +176,7 @@ EMFDRV_ArcChordPie( PHYSDEV dev, INT left, INT top, INT right, INT bottom,
INT xstart, INT ystart, INT xend, INT yend, DWORD iType )
{
EMFDRV_PDEVICE *physDev = get_emf_physdev( dev );
+ DC *dc = get_physdev_dc( dev );
INT temp, xCentre, yCentre, i;
double angleStart, angleEnd;
double xinterStart, yinterStart, xinterEnd, yinterEnd;
@@ -188,7 +188,7 @@ EMFDRV_ArcChordPie( PHYSDEV dev, INT left, INT top, INT right, INT bottom,
if(left > right) {temp = left; left = right; right = temp;}
if(top > bottom) {temp = top; top = bottom; bottom = temp;}
- if(GetGraphicsMode(dev->hdc) == GM_COMPATIBLE) {
+ if(dc->GraphicsMode == GM_COMPATIBLE) {
right--;
bottom--;
}
@@ -269,7 +269,7 @@ EMFDRV_ArcChordPie( PHYSDEV dev, INT left, INT top, INT right, INT bottom,
if (iType == EMR_ARCTO)
{
POINT pt;
- GetCurrentPositionEx( dev->hdc, &pt );
+ pt = dc->cur_pos;
bounds.left = min( bounds.left, pt.x );
bounds.top = min( bounds.top, pt.y );
bounds.right = max( bounds.right, pt.x );
@@ -348,6 +348,7 @@ BOOL EMFDRV_AngleArc( PHYSDEV dev, INT x, INT y, DWORD radius, FLOAT start, FLOA
BOOL EMFDRV_Ellipse( PHYSDEV dev, INT left, INT top, INT right, INT bottom )
{
EMFDRV_PDEVICE *physDev = get_emf_physdev( dev );
+ DC *dc = get_physdev_dc( dev );
EMRELLIPSE emr;
INT temp;
@@ -358,7 +359,7 @@ BOOL EMFDRV_Ellipse( PHYSDEV dev, INT left, INT top, INT right, INT bottom )
if(left > right) {temp = left; left = right; right = temp;}
if(top > bottom) {temp = top; top = bottom; bottom = temp;}
- if(GetGraphicsMode( dev->hdc ) == GM_COMPATIBLE) {
+ if(dc->GraphicsMode == GM_COMPATIBLE) {
right--;
bottom--;
}
@@ -381,6 +382,7 @@ BOOL EMFDRV_Ellipse( PHYSDEV dev, INT left, INT top, INT right, INT bottom )
BOOL EMFDRV_Rectangle(PHYSDEV dev, INT left, INT top, INT right, INT bottom)
{
EMFDRV_PDEVICE *physDev = get_emf_physdev( dev );
+ DC *dc = get_physdev_dc( dev );
EMRRECTANGLE emr;
INT temp;
@@ -391,7 +393,7 @@ BOOL EMFDRV_Rectangle(PHYSDEV dev, INT left, INT top, INT right, INT bottom)
if(left > right) {temp = left; left = right; right = temp;}
if(top > bottom) {temp = top; top = bottom; bottom = temp;}
- if(GetGraphicsMode( dev->hdc ) == GM_COMPATIBLE) {
+ if(dc->GraphicsMode == GM_COMPATIBLE) {
right--;
bottom--;
}
@@ -415,6 +417,7 @@ BOOL EMFDRV_RoundRect( PHYSDEV dev, INT left, INT top, INT right,
INT bottom, INT ell_width, INT ell_height )
{
EMFDRV_PDEVICE *physDev = get_emf_physdev( dev );
+ DC *dc = get_physdev_dc( dev );
EMRROUNDRECT emr;
INT temp;
@@ -423,7 +426,7 @@ BOOL EMFDRV_RoundRect( PHYSDEV dev, INT left, INT top, INT right,
if(left > right) {temp = left; left = right; right = temp;}
if(top > bottom) {temp = top; top = bottom; bottom = temp;}
- if(GetGraphicsMode( dev->hdc ) == GM_COMPATIBLE) {
+ if(dc->GraphicsMode == GM_COMPATIBLE) {
right--;
bottom--;
}
@@ -474,6 +477,7 @@ static BOOL
EMFDRV_Polylinegon( PHYSDEV dev, const POINT* pt, INT count, DWORD iType )
{
EMFDRV_PDEVICE *physDev = get_emf_physdev( dev );
+ DC *dc = get_physdev_dc( dev );
EMRPOLYLINE *emr;
DWORD size;
BOOL ret, use_small_emr = can_use_short_points( pt, count );
@@ -489,7 +493,7 @@ EMFDRV_Polylinegon( PHYSDEV dev, const POINT* pt, INT count, DWORD iType )
if (!physDev->path)
get_points_bounds( &emr->rclBounds, pt, count,
- (iType == EMR_POLYBEZIERTO || iType == EMR_POLYLINETO) ? dev->hdc : 0 );
+ (iType == EMR_POLYBEZIERTO || iType == EMR_POLYLINETO) ? dc : 0 );
else
emr->rclBounds = empty_bounds;
@@ -799,13 +803,14 @@ BOOL EMFDRV_ExtTextOut( PHYSDEV dev, INT x, INT y, UINT flags, const RECT *lprec
LPCWSTR str, UINT count, const INT *lpDx )
{
EMFDRV_PDEVICE *physDev = get_emf_physdev( dev );
+ DC *dc = get_physdev_dc( dev );
EMREXTTEXTOUTW *pemr;
DWORD nSize;
BOOL ret;
int textHeight = 0;
int textWidth = 0;
- const UINT textAlign = GetTextAlign( dev->hdc );
- const INT graphicsMode = GetGraphicsMode( dev->hdc );
+ const UINT textAlign = dc->textAlign;
+ const INT graphicsMode = dc->GraphicsMode;
FLOAT exScale, eyScale;
nSize = sizeof(*pemr) + ((count+1) & ~1) * sizeof(WCHAR) + count * sizeof(INT);
diff --git a/dlls/gdi32/font.c b/dlls/gdi32/font.c
index f903972..a1b2151 100644
--- a/dlls/gdi32/font.c
+++ b/dlls/gdi32/font.c
@@ -1925,7 +1925,7 @@ BOOL nulldrv_ExtTextOut( PHYSDEV dev, INT x, INT y, UINT flags, const RECT *rect
if (flags & ETO_OPAQUE)
{
RECT rc = *rect;
- HBRUSH brush = CreateSolidBrush( GetNearestColor( dev->hdc, GetBkColor(dev->hdc) ));
+ HBRUSH brush = CreateSolidBrush( GetNearestColor( dev->hdc, dc->backgroundColor ) );
if (brush)
{
@@ -2016,7 +2016,7 @@ BOOL nulldrv_ExtTextOut( PHYSDEV dev, INT x, INT y, UINT flags, const RECT *rect
}
}
- pen = CreatePen( PS_SOLID, 1, GetTextColor(dev->hdc) );
+ pen = CreatePen( PS_SOLID, 1, dc->textColor );
orig = SelectObject( dev->hdc, pen );
for (i = 0; i < count; i++)
@@ -2158,8 +2158,8 @@ BOOL WINAPI ExtTextOutW( HDC hdc, INT x, INT y, UINT flags,
BOOL ret = FALSE;
LPWSTR reordered_str = (LPWSTR)str;
WORD *glyphs = NULL;
- UINT align = GetTextAlign( hdc );
- DWORD layout = GetLayout( hdc );
+ UINT align;
+ DWORD layout;
POINT pt;
TEXTMETRICW tm;
LOGFONTW lf;
@@ -2176,7 +2176,9 @@ BOOL WINAPI ExtTextOutW( HDC hdc, INT x, INT y, UINT flags,
if (!dc) return FALSE;
+ align = dc->textAlign;
breakRem = dc->breakRem;
+ layout = dc->layout;
if (quietfixme == 0 && flags & (ETO_NUMERICSLOCAL | ETO_NUMERICSLATIN))
{
@@ -2223,11 +2225,11 @@ BOOL WINAPI ExtTextOutW( HDC hdc, INT x, INT y, UINT flags,
TRACE("%p, %d, %d, %08x, %s, %s, %d, %p)\n", hdc, x, y, flags,
wine_dbgstr_rect(lprect), debugstr_wn(str, count), count, lpDx);
- TRACE("align = %x bkmode = %x mapmode = %x\n", align, GetBkMode(hdc), GetMapMode(hdc));
+ TRACE("align = %x bkmode = %x mapmode = %x\n", align, dc->backgroundMode, dc->MapMode);
if(align & TA_UPDATECP)
{
- GetCurrentPositionEx( hdc, &pt );
+ pt = dc->cur_pos;
x = pt.x;
y = pt.y;
}
@@ -2427,7 +2429,7 @@ BOOL WINAPI ExtTextOutW( HDC hdc, INT x, INT y, UINT flags,
break;
}
- if (GetBkMode(hdc) != TRANSPARENT)
+ if (dc->backgroundMode != TRANSPARENT)
{
if(!((flags & ETO_CLIPPED) && (flags & ETO_OPAQUE)))
{
@@ -2466,7 +2468,7 @@ done:
OUTLINETEXTMETRICW* otm = NULL;
POINT pts[5];
HPEN hpen = SelectObject(hdc, GetStockObject(NULL_PEN));
- HBRUSH hbrush = CreateSolidBrush(GetTextColor(hdc));
+ HBRUSH hbrush = CreateSolidBrush(dc->textColor);
hbrush = SelectObject(hdc, hbrush);
diff --git a/dlls/gdi32/painting.c b/dlls/gdi32/painting.c
index 1ddaaf6..b12f312 100644
--- a/dlls/gdi32/painting.c
+++ b/dlls/gdi32/painting.c
@@ -124,12 +124,13 @@ BOOL nulldrv_PolyBezier( PHYSDEV dev, const POINT *points, DWORD count )
BOOL nulldrv_PolyBezierTo( PHYSDEV dev, const POINT *points, DWORD count )
{
+ DC *dc = get_nulldrv_dc( dev );
BOOL ret = FALSE;
POINT *pts = HeapAlloc( GetProcessHeap(), 0, sizeof(POINT) * (count + 1) );
if (pts)
{
- GetCurrentPositionEx( dev->hdc, &pts[0] );
+ pts[0] = dc->cur_pos;
memcpy( pts + 1, points, sizeof(POINT) * count );
ret = PolyBezier( dev->hdc, pts, count + 1 );
HeapFree( GetProcessHeap(), 0, pts );
@@ -139,6 +140,7 @@ BOOL nulldrv_PolyBezierTo( PHYSDEV dev, const POINT *points, DWORD count )
BOOL nulldrv_PolyDraw( PHYSDEV dev, const POINT *points, const BYTE *types, DWORD count )
{
+ DC *dc = get_nulldrv_dc( dev );
POINT *line_pts = NULL, *bzr_pts = NULL, bzr[4];
DWORD i;
INT num_pts, num_bzr_pts, space, size;
@@ -167,7 +169,7 @@ BOOL nulldrv_PolyDraw( PHYSDEV dev, const POINT *points, const BYTE *types, DWOR
line_pts = HeapAlloc( GetProcessHeap(), 0, space * sizeof(POINT) );
num_pts = 1;
- GetCurrentPositionEx( dev->hdc, &line_pts[0] );
+ line_pts[0] = dc->cur_pos;
for (i = 0; i < count; i++)
{
switch (types[i])
@@ -211,13 +213,14 @@ BOOL nulldrv_PolyDraw( PHYSDEV dev, const POINT *points, const BYTE *types, DWOR
BOOL nulldrv_PolylineTo( PHYSDEV dev, const POINT *points, INT count )
{
+ DC *dc = get_nulldrv_dc( dev );
BOOL ret = FALSE;
POINT *pts;
if (!count) return FALSE;
if ((pts = HeapAlloc( GetProcessHeap(), 0, sizeof(POINT) * (count + 1) )))
{
- GetCurrentPositionEx( dev->hdc, &pts[0] );
+ pts[0] = dc->cur_pos;
memcpy( pts + 1, points, sizeof(POINT) * count );
ret = Polyline( dev->hdc, pts, count + 1 );
HeapFree( GetProcessHeap(), 0, pts );
--
2.7.4
More information about the wine-patches
mailing list