Re: wine on suse7.3
puoti at inwind.it
puoti at inwind.it
Tue Aug 6 03:23:33 CDT 2002
Go to this url:
http://spazioinwind.libero.it/nonsolomicrosoft/wineen.html
and enter the suse section, you will find a specific linux suse 7.3 rpm
and a version of winesetup that dosen't nead itcl.
> I noticed a distribution for 7.2 & 8.0 but not 7.3.
>
> Download and installation of the 7.2 version appears to go fine - until i
> give the command wine -v
>
> I do understand there is not a config file with the distribution.
> However when i start wine -v
> and take the option to setup config it fails twith a message
> can't find package Itcl and also says the config file does not exist.
> (true). And another meesaage is : invoking 'wish Main.itcl' in
> /usr/lib/wine/winesetuptk has failed.
>
> Somewhere i found a config file and placed it in /.wine/
> Then the system tells me the config file is not a correct registry file
> and 'for some mysterious reason, the wine server failed to run' !
>
> I guess that the config file is not valid and since winesetup meets exactly
> the same grisly end i see no way out save a valid config file.
>
> Can you provide me with a valid config file please or tell me why winsetup
> fails with can't find package Itcl
>
> Regards,
>
> David.
>
> config file is:
>
> [Drive A]
> ; your floppy drive
> Path=/floppy
> Type=floppy
> Label=Floppy
> Serial=87654321
> Device=/dev/fd0
> ; Don´t give raw device access to any drive if
> ; you do not really need it. Giving device raw
> ; device access with the "Device"-entry means
> ; that a user can format a drive with
> ; any windows tool.
>
> [Drive C]
> ; your Windows/Dos partition
> ; please adjust to the path where it is mounted!
> Path=/windows/C
> Type=hd
> Label=MS-DOS
> Filesystem=win95
> ; if vfat partition: Filesystem=win95
> ; NO device-Entry here!
>
> [Drive D]
> ; your cd-rom drive
> ; please adjust to the path where it is mounted!
> Path=/cdrom
> Type=cdrom
> Label=CD-Rom
> Filesystem=win95
> ; if you want to write CDs, you need
> ; raw device access here
>
> [Drive E]
> ; normally this should not be changed
> ; you need write access here, as it will
> ; be assigned as temp dir
> Path=/tmp
> Type=hd
> Label=Tmp Drive
> Filesystem=win95
> ; WARNING: do not add a device entry!!!!
>
> [Drive F]
> Path=${HOME}
> Type=network
> Label=Home
> Filesystem=win95
> ; Maybe, you store applications here
> ; you may add another drive, if you want to install
> ; applications on your Linux partition
> ; Filesystem should be "msdos" or "win95"
> ; if you install or run Windows 95 programs
> ; win95 is recommended
> ; WARNING: do not add a device entry!!!!
>
> [wine]
> Windows=c:\windows
> System=c:\windows\system
> Temp=e:\
> Path=c:\windows;c:\windows\system;e:\;f:\
> GraphicsDriver=x11drv
> ; GraphicsDriver is new and not for old
> ; versions of Wine. See section x11drv for it
> printer=on
> ; If you use a windows printer driver this
> ; should be set to on
> ;SymbolTableFile=/usr/local/lib/wine.sym
> ; SymbolTableFile wir normalerweise nicht benötigt
> ;Profile=c:\windows\Profiles\Administrator
> ; only for use with Windows NT
> ; If you have a windows95-System, it would be better,
> ; to take a clean directory as windows dir, seems there are
> ; some problems with the windows registry
> ; please note: Give all paths in dos/windows notation!
> ; do not change to or add something like
> ; "/home/windows"
> ; Wine would not accept that!!!
> ; locate your "wine.sym" file to ensure the path to
> ; it (this is to be given in Unix-notation) is
> ; correct
> ; wine.sym normally is located in /usr/local/lib or /usr/lib
>
> ; The next three sections are only for version of Wine
> ; after 990323. You do not need to add them if you
> ; are using an older version!
> ; Wine has reasonable defaults built in,
> ; so you are not forced to add them
> ; for newer versions either.
>
> [DllDefaults]
> EXTRA_LD_LIBRARY_PATH=${HOME}/wine/cvs/lib
> ; This is only needed if you have additional compiled
> ; dlls; if not, the leave it as is.
> DefaultLoadOrder = native, elfdll, so, builtin
> ; Not used in older Wine versions!
> ; The default load order for dlls used by Wine, you may
> ; overwrite it by command line options. Please see "man wine"
> ; for options
>
> [DllPairs]
> ; Not used in older Wine versions!
> krnl386 = kernel32
> gdi = gdi32
> user = user32
> commdlg = comdlg32
> commctrl= comctl32
> ver = version
> shell = shell32
> lzexpand= lz32
> mmsystem= winmm
> msvideo = msvfw32
> winsock = wsock32
> ; The dll pairs are needed together with the load order.
> ; these dlls always have to be loaded together as builtin,
> ; native or whatever
> ; You may not load one dll of a pair as builtin and the other
> ; native.
>
> [DllOverrides]
> ; Not used in older Wine versions!
> kernel32, gdi32, user32 = builtin
> krnl386, gdi, user = builtin
> toolhelp = builtin
> comdlg32, commdlg = elfdll, builtin, native
> version, ver = elfdll, builtin, native
> shell32, shell = builtin, native
> lz32, lzexpand = builtin, native
> commctrl, comctl32 = builtin, native
> wsock32, winsock = builtin
> advapi32, crtdll, ntdll = builtin, native
> mpr, winspool = builtin, native
> ddraw, dinput, dsound = builtin, native
> winmm, mmsystem = builtin
> msvideo, msvfw32 = builtin, native
> w32skrnl = builtin
> wnaspi32, wow32 = builtin
> system, display, wprocs = builtin
> wineps = builtin
> ; this is the default load order for the dlls
> ; you may make changes here, but NEVER change the
> ; first two lines!!!
> ; WARNING: The big ones, krnl386, kernel32, gdi, gdi32,
> ; user and user32 cannot be native, but MUST be of
> ; type "builtin"
>
> [x11drv]
> ; Number of colors to allocate from the system palette
> AllocSystemColors = 100
> ; Use a private color map
> PrivateColorMap = N
> ; Favor correctness over speed in some graphics operations
> PerfectGraphics = N
> ; Color depth to use on multi-depth screens
> ;;ScreenDepth = 16
> ; Name of X11 display to use
> ;;Display = :0.0
> ; Allow the window manager to manage created windows
> Managed = N
> ; Use XFree86 DGA extension if present
> UseDGA = Y
> ; Use XShm extension if present
> UseXShm = Y
> ; Enable DirectX mouse grab
> DXGrab = N
> ; Create the desktop window with a double-buffered visual
> ; (useful to play OpenGL games)
> DesktopDoubleBuffered = N
> ; Code page used for captions in managed mode
> ; 0 means default ANSI code page (CP_ACP == 0)
> TextCP=0
> ; Use this if you have more than one port for video on your setup
> ; (Wine uses for now the first 'input image' it founds).
> ;; XVideoPort = 43
>
>
> ;;Please, do not edit the next line
> ;;Configuration for wine version: 20020710
>
>
>
>
>
> _______________________________________________
> wine-users mailing list
> wine-users at winehq.com
> http://www.winehq.com/mailman/listinfo/wine-users
>
More information about the wine-users
mailing list