Com port over the fourth

[Stefano Baronio]

Hello everybody,
	I'm trying to get work a win32 application (for NT) that communicate
with a lots of modems (30-40). 
No problems if I configure the modem on the first two com ports, but I
cannot make it run if I ask it to use, for example, COM10, COM11, etc..
The command is:
wine --winver nt40 gpcwin.exe
Here is the error:
fixme:win32:DEVICE_Open Unknown VxD COM10. Try --winver nt40 or win31 !
err:progress:ProgressWindowProc unknown msg be10 wp=1ef40001 lp=00001ef4
err:progress:ProgressWindowProc unknown msg be10 wp=1f900001 lp=00001f90
err:progress:ProgressWindowProc unknown msg be10 wp=202c0001 lp=0000202c
etc. etc.

I tried to set the COM definition in the registry file system.reg
[HARDWARE\\DEVICEMAP\\SERIALCOMM] 1015709345
"Serial0"="COM1"
"Serial1"="COM2"
"Serial10"="COM11"
"Serial9"="COM10"

as WinNT does, but no way.

The COM10,11,12,etc. are virtual com port (com ports over tcp/ip) that
work if I map them on the first two system com ports (Com1 and Com2 in
the ~/.wine/config file).

Any help will be appreciated.

Thank you

Stefano