[Wine]Comm Port trouble.....

[Peter von Tresckow]

Hi I am trying to run A utility that communicates to my Trimble GPS
board via the serial port. I have set up the ports in wine, and
checked to make sure that data is being sent from the GPS (did a cat
/dev/ttyS0 which returned binary data being sent by the GPS).

Below is the output from WINEDEBUG=+comm wine tsipmon32.exe

wine ver 20040813

fixme:comm:SetupComm insize 4096 outsize 4096 unimplemented stub
trace:comm:PurgeComm handle 0x54, flags f
trace:comm:SetCommTimeouts (0x54,0x538ef7cc)
trace:comm:GetCommState handle 0x54, ptr 0x538ef790
trace:comm:GetCommState OK
trace:comm:GetCommState bytesize 8 baudrate 9600 fParity 1 Parity 1
stopbits 1
trace:comm:GetCommState ~IXON ~IXOFF
trace:comm:GetCommState fOutxCtsFlow 0 fRtsControl 1
trace:comm:GetCommState fOutxDsrFlow 0 fDtrControl1
trace:comm:GetCommState ~CRTSCTS
trace:comm:SetCommState handle 0x54, ptr 0x538ef790
trace:comm:SetCommState bytesize 8 baudrate 9600 fParity 1 Parity 0
stopbits 1
trace:comm:SetCommState ~IXON ~IXOFF
trace:comm:SetCommState fOutxCtsFlow 0 fRtsControl 1
trace:comm:SetCommState fOutxDsrFlow 0 fDtrControl1
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:GetCommState handle 0x54, ptr 0x538efc6c
trace:comm:GetCommState OK
trace:comm:GetCommState bytesize 8 baudrate 9600 fParity 1 Parity 0
stopbits 1
trace:comm:GetCommState ~IXON ~IXOFF
trace:comm:GetCommState fOutxCtsFlow 0 fRtsControl 1
trace:comm:GetCommState fOutxDsrFlow 0 fDtrControl1
trace:comm:GetCommState ~CRTSCTS
trace:comm:SetCommState handle 0x54, ptr 0x538efc6c
trace:comm:SetCommState bytesize 8 baudrate 9600 fParity 1 Parity 1
stopbits 1
trace:comm:SetCommState ~IXON ~IXOFF
trace:comm:SetCommState fOutxCtsFlow 0 fRtsControl 1
trace:comm:SetCommState fOutxDsrFlow 0 fDtrControl1
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:ClearCommError handle 0x54 cbInQue = 0 cbOutQue = 0
trace:comm:PurgeComm handle 0x54, flags f

any suggestions???

Peter von Tresckow