[Wine] Running Hitec HPP-22 under wine. (RC device, USB)

[Martin Gregorie]

On Fri, 2011-03-11 at 12:26 -0700, Linuxguy123 wrote:

> When I run the resulting HPP-22 program, it displays "HPP-22 is
> disconnected."  Ie its not finding the HPP-22 hardware connected to the
> PC via a USB cable.
> 
> dmesg states the following:
> ======================================================
> [263071.342137] usb 6-1: new full speed USB device using uhci_hcd and
> address 4
> [263071.514255] usb 6-1: New USB device found, idVendor=1e1a,
> idProduct=001f
> [263071.514266] usb 6-1: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [263071.514273] usb 6-1: Product: HPP-22
> [263071.514278] usb 6-1: Manufacturer: HITECRCD Inc
> [263071.514283] usb 6-1: SerialNumber:   HPP-22-00000
> [263071.524680] generic-usb 0003:1E1A:001F.0005: hiddev97,hidraw2: USB
> HID v0.01 Device [HITECRCD Inc HPP-22] on usb-0000:00:1d.1-1/input0
> =======================================================
> 
Does the dmesg display show what device name was assigned to the HPP-22
somewhere in the next few lines? That's normally logged after a USB
device is plugged and recognised. It may be easier to spot if you run
the command "sudo tail -f /var/log/messages" before you plug the device
in - this should let you see all the HPP-22 related messages as that are
logged. Use Ctrl-C to exit from tail when you're done with it.


Martin