[Bug 14671] New: HCA fails to communicate with LynX-10 module through COM-1, gives error pop-up

[wine-bugs at winehq.org]

http://bugs.winehq.org/show_bug.cgi?id=14671

           Summary: HCA fails to communicate with LynX-10 module through
                    COM-1, gives error pop-up
           Product: Wine
           Version: 1.1.2
          Platform: PC-x86-64
        OS/Version: Linux
            Status: UNCONFIRMED
          Severity: normal
          Priority: P2
         Component: -unknown
        AssignedTo: wine-bugs at winehq.org
        ReportedBy: Cobra176 at chartermi.net


Created an attachment (id=15126)
 --> (http://bugs.winehq.org/attachment.cgi?id=15126)
Screenshot of the error dialog

Marrick Ltd. Home Control Assistant (HCA) fails to communicate with a LynX-10
module connected to COM-1, returns an error pop-up window [see image
attachment]

This error occurs when in hardware setup, clicking the Test button for the
device. The device is specified manually-there is nothing implying that there
was any actual communication with the device. Activity lights did not come on
with the LynX-10. The software cannot perform its task without communicating
with the interface.

This does not occur within native Win98SE. The device is indeed connected to
serial port 1 and is powered up.

Background info:
LynX-10 is an X10 interface used for home automation for sending digital
messages through AC lines to turn various devices on and off, dim lights, etc.
with computer control. It connects using a serial port, is powered off the AC
and has an activity light for serial exchanges. 

http://www.hcatech.com/

The software is designed to interface with a variety of interfaces; each
interface needs specification as to what COM port it is attached to. Next to
each interface on the setup dialog is a Test button. When this Test button is
clicked the dialog described above occurs. 

The attached log starts from startup of the program, which runs quite smoothly 
until the explicitly-marked parts.

Machine info:
kubuntu 8.4, up-to-date (as of Jul 27 2008)
2 serial ports, 1 plugged into LynX-10, second is free.
No special serial port software installed on linux end.
Windows version mode is "use default"

The following DLLs are overridden with no benefit:
comcat
comctl32
comdlg32


-- 
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.