[PATCH] testbot/RestoreVM: A script to restore a Libirt/QEmu VM.
Francois Gouget
fgouget at codeweavers.com
Sun Mar 31 20:44:12 CDT 2019
This allows restoring a VM from either a borg repository (potentially
remote), a set of compressed tar files or a directory created by the
--extract-only option.
RestoreVM automatically waits for the VM to not be in use before
restoring it, and minimises the time it takes to perform the final step.
RestoreVM --disk-only verifies that none of the Libvirt configuration
files changed and then only replaces the disks. This can be useful to
remove accumulated cruft from the qcow2 image files.
The VM can be renamed during restoration, in which case its uuid and
MAC address are also modified to avoid conflicts (but the guest
configuration such as hostname and IP address must be changed
manually).
With --extract-only RestoreVM will just extract the files to a
temporary directory and show the commands to use to manually put them
into place.
The --extract-only option can be combined with renaming the VM and the
directory will contain both sets of Libvirt configuration files which
allows comparing and verifying them.
In case of an error (such as if the VM is running and does not stop
within the imparted time) RestoreVM automatically switches to the
--extract-only mode. This allows continuing the restoration by passing
that directory as an argument once the issue has been resolved.
Signed-off-by: Francois Gouget <fgouget at codeweavers.com>
---
testbot/scripts/RestoreVM | 711 ++++++++++++++++++++++++++++++++++++++
1 file changed, 711 insertions(+)
create mode 100755 testbot/scripts/RestoreVM
diff --git a/testbot/scripts/RestoreVM b/testbot/scripts/RestoreVM
new file mode 100755
index 00000000..a31f3ea7
--- /dev/null
+++ b/testbot/scripts/RestoreVM
@@ -0,0 +1,711 @@
+#!/bin/sh
+#
+# Restores a QEMU/LibVirt VM from backup.
+#
+# Copyright 2013-2019 Francois Gouget
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
+
+name0=`basename "$0"`
+
+etcdir="etc/libvirt/qemu"
+snapdir="var/lib/libvirt/qemu/snapshot"
+imgdir="var/lib/libvirt/images"
+
+
+#
+# Generic helpers
+#
+
+error()
+{
+ echo "$name0:error:" "$@" >&2
+}
+
+warning()
+{
+ echo "$name0:warning:" "$@" >&2
+}
+
+opt_dry_run=""
+opt_verbose=""
+dry_run()
+{
+ # Redirect to stderr to avoid issues with stdout redirects
+ [ -n "$opt_verbose$opt_dry_run" ] && echo "$@" >&2
+ if [ -z "$opt_dry_run" ]
+ then
+ "$@"
+ fi
+}
+
+
+#
+# Process the command line
+#
+
+check_opt_val()
+{
+ option="$1"
+ var="$2"
+ argc="$3"
+
+ if [ -n "$var" ]
+ then
+ error "$option can only be specified once"
+ usage=2 # but continue processing options
+ fi
+ if [ $argc -eq 0 ]
+ then
+ error "missing value for $option"
+ usage=2
+ return 1
+ fi
+ return 0
+}
+
+opt_borg=""
+opt_tar=""
+opt_src=""
+opt_vm=""
+opt_disk_only=""
+opt_extract_only=""
+opt_dir=""
+usage=""
+while [ $# -gt 0 ]
+do
+ arg="$1"
+ shift
+ case "$arg" in
+ --as)
+ if check_opt_val "$arg" "$opt_vm" $#
+ then
+ opt_vm="$1"
+ shift
+ fi
+ ;;
+ --disk-only)
+ opt_disk_only="1"
+ ;;
+ --extract-only)
+ opt_extract_only="1"
+ ;;
+ --dir)
+ if check_opt_val "$arg" "$opt_dir" $#
+ then
+ opt_dir="$1"
+ shift
+ fi
+ ;;
+ --verbose)
+ opt_verbose="1"
+ ;;
+ --dry-run)
+ opt_dry_run="1"
+ ;;
+ -\?|-h|--help)
+ usage=0
+ ;;
+ -*)
+ error "unknown option '$arg'"
+ usage=2
+ break
+ ;;
+ *::*)
+ if [ -n "$opt_src" ]
+ then
+ error "only one backup can be specified."
+ usage=2
+ fi
+ opt_src="$arg"
+ opt_borg="$opt_src"
+ ;;
+ *.bz2*)
+ if [ -n "$opt_src" ]
+ then
+ error "only one backup can be specified."
+ usage=2
+ fi
+ opt_src="$arg"
+ opt_tar="$opt_src"
+ ;;
+ *)
+ if [ -n "$opt_src" ]
+ then
+ error "only one backup can be specified."
+ usage=2
+ fi
+ opt_src="$arg"
+ [ -f "$opt_src" ] && opt_tar="$opt_src"
+ ;;
+ esac
+done
+
+if [ -z "$usage" ]
+then
+ if [ -z "$opt_extract_only" ]
+ then
+ if [ ! -d "/$etcdir" -o ! -w "/$etcdir" -o \
+ ! -d "/$snapdir" -o ! -w "/$snapdir" -o \
+ ! -d "/$imgdir" -o ! -w "/$imgdir" ]
+ then
+ error "one or more libvirt directory is missing or not writable. Use --extract-only to extract the VM in the current directory."
+ usage=2
+ fi
+ fi
+
+ if [ -n "$opt_borg" ]
+ then
+ opt_src=""
+ case "$opt_borg" in
+ *:/*) ;; # Remote repository
+ /*) ;; # Absolute path
+ *) opt_borg="`pwd`/$opt_borg" ;;
+ esac
+
+ elif [ -n "$opt_tar" ]
+ then
+ opt_src=""
+ opt_tar=`echo $opt_tar | sed -e 's/\.[0-9]*$//'`
+ if [ -f "$opt_tar.00" ]
+ then
+ opt_tar="$opt_tar.??"
+ elif [ ! -f "$opt_tar" ]
+ then
+ error "could not find the '$opt_tar' files"
+ usage=2
+ fi
+ case "$opt_tar" in
+ *\ *)
+ error "the backup filenames must not contain spaces."
+ usage=2
+ ;;
+ /*) ;;
+ *) opt_tar="`pwd`/$opt_tar" ;;
+ esac
+
+ elif [ -n "$opt_src" ]
+ then
+ if [ ! -f "$opt_src/$name0.vm" ]
+ then
+ error "'$opt_src' is not a valid $name0 --extract-only directory"
+ usage=2
+ fi
+
+ else
+ error "you must specify a backup to restore."
+ usage=2
+ fi
+ if [ -n "$opt_disk_only" -a -n "$opt_extract_only" ]
+ then
+ error "--disk-only and --extract-only are mutually exclusive"
+ usage=2
+ elif [ -n "$opt_disk_only" -a -n "$opt_vm" ] &&
+ ! virsh --connect "$opt_connect" domstate "$opt_vm" >/dev/null
+ then
+ error "cannot replace the disk of the non-existent '$opt_vm' VM"
+ usage=2
+ fi
+ [ -n "$opt_connect" ] || opt_connect="qemu:///system"
+fi
+
+if [ -n "$usage" ]
+then
+ if [ "$usage" != "0" ]
+ then
+ error "try '$name0 --help' for more information"
+ exit $usage
+ fi
+ cat <<EOF
+Usage: $name0 [--as VMNAME] [--disk-only] [--extract-only] [--dir DIR]
+ [--connect URI] [--dry-run] [--verbose] [--help]
+ BORG|TAR|EXTRACTDIR
+
+Restores a VM from the specified backup files.
+This must be run as root on the VM host.
+
+Where:
+ BORG The borg repository::archive containing the VM backup.
+ TAR The stem of the files containing the VM backup.
+ EXTRACTDIR A directory created by $name0 --extract-only.
+ --as VMNAME Rename the VM when restoring it. Note that this also changes its
+ UUID, MAC address, etc so it can be used side-by-side with the
+ original VM.
+ --disk-only Only replace the disk images. Note that this will fail if the
+ backup VM settings and snapshots differ from the existing VM.
+ --extract-only Extract the VM and check if it matches the existing VM, but
+ do not replace it. This leaves the files around for further
+ inspection.
+ --dir DIR Extract the VM files in the specified directory.
+ --connect URI Connect to the specified Libvirt server.
+ --verbose Show all the commands as they are being run.
+ --dry-run Show what would happen but do not extract or change anything.
+ --help, -h Shows this help message.
+EOF
+ exit 0
+fi
+
+
+#
+# Create the temporary directory
+#
+
+tmpdir=""
+
+cleanup()
+{
+ cd /
+ if [ -z "$opt_dry_run" -a -n "$tmpdir" ]
+ then
+ if [ -z "$opt_extract_only" -a -f "$tmpdir/$name0.vm" ]
+ then
+ rm -rf "$tmpdir"
+ elif [ -d "$tmpdir" ] && ! rmdir "$tmpdir" 2>/dev/null
+ then
+ echo "not deleting '$tmpdir'"
+ fi
+ fi
+}
+
+fatal()
+{
+ error "$@"
+ cleanup
+ exit 1
+}
+
+fatal_no_cleanup()
+{
+ [ $# -gt 0 ] && error "$@"
+ echo "the VM files are in '$tmpdir'"
+ exit 1
+}
+
+get_vm_disk_images()
+{
+ _root="$1"
+ _vm="$2"
+ sed -e "s~^ *<source file='\([^']*\)' */> *\$~\\1~" -e t -e d "$_root$etcdir/$_vm.xml" "$_root$snapdir/$_vm"/*.xml | sort | uniq
+}
+
+get_symlink_closure()
+{
+ while read file
+ do
+ echo "$file"
+ while [ -h "$file" ]
+ do
+ target=`readlink "$file"`
+ case "$target" in
+ /*) file="$target" ;;
+ *) file=`dirname "$file"`"/$target" ;;
+ esac
+ echo "$file"
+ done
+ done
+}
+
+get_file_sizes()
+{
+ while read file
+ do
+ du -k "$file"
+ done
+}
+
+if [ -n "$opt_src" ]
+then
+ tmpdir="$opt_src"
+else
+ if [ -z "$opt_dir" ]
+ then
+ if [ -z "$opt_extract_only" ]
+ then
+ # Extract the temporary files in the same directory as the biggest
+ # disk image to speed up the final move. This also avoids getting
+ # waylaid by the symbolic links.
+ img=`get_vm_disk_images "/" "$vm" 2>/dev/null | get_symlink_closure | sort | uniq | get_file_sizes | sort -n -r | cut -f2 | head -n 1`
+ if [ -n "$img" -a -f "$img" -a -w "$img" ]
+ then
+ opt_dir=`dirname "$img"`
+ else
+ opt_dir="/$imgdir"
+ fi
+ else
+ opt_dir=`pwd`
+ fi
+ fi
+ if [ -n "$opt_borg" ]
+ then
+ tmpdir=`echo "$opt_borg" | sed -e 's/^.*:://'`
+ else
+ tmpdir=`basename "$opt_tar" | sed -e 's~\.tar\.\?[^/]*$~~'`
+ fi
+ tmpdir="$opt_dir/$tmpdir"
+ [ -n "$opt_extract_only" ] || tmpdir="$tmpdir.$$"
+ if [ -d "$tmpdir" ]
+ then
+ fatal_no_cleanup "'$tmpdir' already exists. Please clean up!"
+ fi
+ dry_run mkdir "$tmpdir" || fatal_no_cleanup "could not create the '$tmpdir' directory"
+fi
+
+# $tmpdir must be an absolute path for the cleanup
+case "$tmpdir" in
+/*) ;; # Absolute path
+*) tmpdir="`pwd`/$tmpdir" ;;
+esac
+if [ -z "$opt_dry_run" -o -d "$tmpdir" ]
+then
+ cd "$tmpdir" || fatal "could not chdir to '$tmpdir'"
+else
+ dry_run cd "$tmpdir"
+fi
+
+
+#
+# Extract the VM
+#
+
+nice=""
+which ionice >/dev/null && nice="ionice"
+which nice >/dev/null && nice="nice $nice"
+
+vm=""
+if [ -n "$opt_borg" ]
+then
+ borg_opts=""
+ [ -n "$opt_verbose" ] && borg_opts="$borg_opts --verbose"
+ dry_run $nice borg extract --sparse $borg_opts "$opt_borg"
+ rc_borg=$?
+ if [ $rc_borg -ne 0 ]
+ then
+ fatal "an error occurred while extracting the VM (borg=$rc_borg)"
+ fi
+elif [ -n "$opt_tar" ]
+then
+ zipcmd=pbzip2
+ which pbzip2 >/dev/null || zipcmd=bzip2
+ tar_opts=""
+ [ -n "$opt_verbose" ] && tar_opts="-v"
+ if [ -n "$opt_verbose$opt_dry_run" ]
+ then
+ echo "$nice cat $opt_tar | $nice $zipcmd -c -d | $nice tar xf - $tar_opts"
+ fi
+
+ if [ -n "$opt_dry_run" ]
+ then
+ rc_tar=0
+ rc_zip=0
+ rc_cat=0
+ else
+ ($nice cat $opt_tar; echo $? >"$tmpdir/rc_cat") | \
+ ($nice $zipcmd -c -d; echo $? >"$tmpdir/rc_zip") | \
+ $nice tar xf - $tar_opts
+ rc_tar=$?
+ rc_zip=`cat "$tmpdir/rc_zip"`
+ rc_cat=`cat "$tmpdir/rc_cat"`
+ fi
+ if [ "$rc_cat" != "0" -o "$rc_zip" != "0" -o "$rc_tar" != "0" ]
+ then
+ fatal "an error occurred while extracting the VM (cat=$rc_cat zip=$rc_zip tar=$rc_tar)"
+ fi
+else
+ vm=`cat "$tmpdir/$name0.vm"`
+fi
+
+if [ ! -d "$tmpdir" ]
+then
+ vm="dry-run-vm" # dry-run mode
+elif [ -z "$vm" ]
+then
+ for conffile in "$etcdir"/*.xml
+ do
+ conffile=`basename "$conffile" .xml`
+ if [ -z "$vm" ]
+ then
+ vm="$conffile"
+ else
+ fatal_no_cleanup "found more than one VM in the backup: $vm and $conffile"
+ fi
+ done
+ [ -z "$opt_dry_run" ] && echo "$vm" >"$tmpdir/$name0.vm"
+fi
+
+
+#
+# Rename the VM
+#
+
+if [ -z "$opt_vm" -o "$opt_vm" = "$vm" ]
+then
+ opt_vm="$vm"
+elif [ -n "$opt_dry_run" ]
+then
+ warning "skipping the renaming step in dry-run mode"
+ [ -n "$opt_vm" ] || opt_vm="$vm"
+else
+ conffile="$etcdir/$vm.xml"
+ old_uuid=`sed -e 's~^.*<uuid> *\([0-9a-f-]*\) *</uuid>.*$~\1~' -e t -e d "$conffile" | head -n 1`
+ new_uuid=`uuidgen`
+ old_mac=`sed -e "s~^.*<mac *address='\\([0-9a-f:]*\\)'.*$~\\1~" -e t -e d "$conffile" | head -n 1`
+ new_mac=`echo "$old_mac" | cut -c1-9``uuidgen | sed -e 's~^\([0-9a-f][0-9a-f]\)\([0-9a-f][0-9a-f]\)\([0-9a-f][0-9a-f]\).*$~\1:\2:\3~'`
+
+ update_config()
+ {
+ sed -e "s~<name>$vm</name>~<name>$opt_vm</name>~" \
+ -e "s~$old_uuid~$new_uuid~" \
+ -e "s~$old_mac~$new_mac~" \
+ -e "s~/$imgdir/$vm~/$imgdir/$opt_vm~"
+ }
+
+ # Update the VM configuration
+ failed=""
+ update_config <"$conffile" >"$etcdir/$opt_vm.xml" || failed=1
+
+ # Update the VM snapshots
+ if [ -d "$snapdir/$vm" ]
+ then
+ mkdir "$snapdir/$opt_vm"
+ for conffile in "$snapdir/$vm"/*.xml
+ do
+ if [ -f "$conffile" ]
+ then
+ snapshot=`basename "$conffile"`
+ update_config <"$conffile" >"$snapdir/$opt_vm/$snapshot" || failed=1
+ fi
+ done
+ fi
+
+ # Rename the disk(s)
+ # Note: Remove the leading '/' from the symlink targets
+ for src_disk in `get_vm_disk_images "" "$vm" | get_symlink_closure | sed -e 's~^/~~' | sort | uniq`
+ do
+ dst_disk=`echo "$src_disk" | sed -e "s/$vm/$opt_vm/g"`
+ dst_dir=`dirname "$dst_disk"`
+ mkdir -p "$dst_dir"
+ if [ -h "$src_disk" ]
+ then
+ src_target=`readlink "$src_disk"`
+ dst_target=`echo "$src_target" | sed -e "s/$vm/$opt_vm/g"`
+ rm "$src_disk"
+ ln -s "$dst_target" "$dst_disk" || failed=1
+ else
+ mv "$src_disk" "$dst_disk" || failed=1
+ fi
+ done
+ [ -z "$failed" ] || fatal_no_cleanup
+fi
+[ -z "$opt_dry_run" ] && echo "$opt_vm" >"$tmpdir/$name0.vm"
+
+
+#
+# Verify that the VM exists
+#
+
+wait_for_vm()
+{
+ _vm="$1"
+ _timeout="$2"
+
+ while true
+ do
+ _state=`(virsh --connect "$opt_connect" list --all 2>/dev/null || echo " $_vm error") | sed -e "s/^.* $_vm *//" -e t -e d`
+ [ -z "$opt_dry_run" ] || _state="shut off"
+ case "$_state" in
+ "error")
+ echo "nolibvirt"
+ return
+ ;;
+ "")
+ echo "novm"
+ return
+ ;;
+ "shut off")
+ echo "off"
+ return
+ ;;
+ esac
+
+ echo "$_vm is not powered off ($_state). Waiting for up to ${_timeout}s..." >&2
+ _timeout=`expr $_timeout - 10`
+ if [ $_timeout -le 0 ]
+ then
+ echo "running"
+ return
+ fi
+ sleep 10
+ done
+}
+
+has_vm=1
+if [ -z "$opt_extract_only" ]
+then
+ error=""
+ case `wait_for_vm "$opt_vm" 120` in
+ running) error "$opt_vm did not power off"; error=1 ;;
+ nolibvirt) error "Could not connect to libvirt"; error=1 ;;
+ novm)
+ if [ -n "$opt_disk_only" ]
+ then
+ error "$opt_vm does not exist"
+ error=1
+ fi
+ has_vm=""
+ ;;
+ esac
+ if [ -n "$error" ]
+ then
+ warning "Continuing in --extract-only mode"
+ opt_extract_only=1
+ fi
+fi
+
+
+#
+# Check that the backup matches the current VM
+#
+
+if [ -z "$opt_disk_only" -o -n "$opt_extract_only" ]
+then
+ true # nothing to do
+elif [ -n "$opt_dry_run" ]
+then
+ warning "not checking that the '$opt_vm' VM matches the backup in dry-run mode"
+else
+ failed=""
+ for vmconf in "/$etcdir/$opt_vm.xml" "/$snapdir/$opt_vm"/*.xml
+ do
+ [ -f "$vmconf" ] || continue
+
+ bakconf=`echo "$vmconf" | sed -e 's~^/~~' -e 's~/$opt_vm~/$vm~'`
+ if [ ! -f "$bakconf" ]
+ then
+ error "the backup is missing '$vmconf'"
+ failed=1
+ elif ! diff -u "$vmconf" "$bakconf"
+ then
+ error "the backup's copy of '$vmconf' does not match"
+ failed=1
+ fi
+ done
+ for bakconf in "$etcdir/$opt_vm.xml" "$snapdir/$opt_vm"/*.xml
+ do
+ [ -f "$backconf" ] || continue
+
+ vmconf=`echo "/$bakconf" | sed -e 's~/$vm~/$opt_vm~'`
+ if [ ! -f "$vmconf" ]
+ then
+ error "the backup has an extra file: $bakconf"
+ failed=1
+ fi
+ done
+ [ -z "$failed" ] || fatal_no_cleanup
+fi
+
+if [ -n "$opt_extract_only" ]
+then
+ [ -n "$opt_verbose" ] && echo
+ echo "The $opt_vm files are in '$tmpdir'"
+ echo "To install it run the following commands:"
+ echo
+ echo "cd '$tmpdir'"
+
+ # Run the replacement commands as if in --dry-run mode
+ # so the user sees how to put the files in place.
+ opt_dry_run="1"
+fi
+
+
+#
+# Delete the existing VM
+#
+
+if [ -z "$opt_disk_only" -a -n "$has_vm" ]
+then
+ olddisks=`get_vm_disk_images "/" "$opt_vm" 2>/dev/null | get_symlink_closure | sort | uniq`
+ if ! dry_run virsh --connect "$opt_connect" undefine "$opt_vm" \
+ --snapshots-metadata --remove-all-storage
+ then
+ fatal_no_cleanup "could not remove the existing '$opt_vm' VM"
+ fi
+ [ -z "$olddisks" ] || dry_run rm $olddisks
+fi
+
+
+#
+# Create the new VM ($opt_dry_run takes care of $opt_extract_only)
+#
+
+# Replace the disk images
+if [ -f "$tmpdir/$etcdir/$opt_vm.xml" ]
+then
+ # Note: Remove the leading '/' for both the symlink paths and their targets
+ disks=`get_vm_disk_images "" "$opt_vm" 2>/dev/null | sed -e 's~^/~~' | get_symlink_closure | sed -e 's~^/~~' | sort | uniq`
+else
+ disks="$imgdir/dry-run-disk.qcow2"
+fi
+
+failed=""
+for disk in $disks
+do
+ dir=`dirname "$disk"`
+ [ -d "/$dir" ] || dry_run mkdir -p "/$dir"
+ dry_run mv "$disk" "/$disk" || failed=1
+done
+
+if [ -z "$opt_disk_only" ]
+then
+ # Create the VM
+ dry_run virsh --connect "$opt_connect" define "$etcdir/$opt_vm.xml" || failed=1
+
+ # Get the snapshots in their dependency order (or creation order)
+ get_snapshot_creationtime()
+ {
+ _dir="$1"
+ for snapxml in "$_dir"/*.xml
+ do
+ name=`basename "$snapxml" .xml`
+ ctime=`sed -e 's~^.*<creationTime>\([0-9][0-9]*\)</creationTime>.*$~\1~' -e t -e d "$snapxml"`
+ echo "$ctime $name"
+ done
+ }
+
+ # Create the snapshots
+ if [ -d "$tmpdir" -a \( -z "$opt_dry_run" -o "$opt_vm" = "$vm" \) ]
+ then
+ snapshots=`get_snapshot_creationtime "$snapdir/$opt_vm" | sort -n | cut -d' ' -f2`
+ else
+ snapshots="dry-run-snapshot" # dry-run mode
+ fi
+ for snapshot in $snapshots
+ do
+ dry_run virsh --connect "$opt_connect" snapshot-create "$opt_vm" \
+ "$snapdir/$opt_vm/$snapshot.xml" --redefine || failed=1
+ done
+fi
+
+[ -z "$failed" ] || fatal_no_cleanup
+
+
+#
+# Clean up
+#
+
+[ -z "$opt_extract_only" ] || tmpdir=""
+
+cleanup
+
+exit 0
--
2.20.1
More information about the wine-devel
mailing list