[PATCH 4/8] d3d8/tests: Test display mode restoration.
Zhiyi Zhang
zzhang at codeweavers.com
Wed Oct 28 01:38:05 CDT 2020
Mostly to test that when doing mode restoration, all display outputs get restored to their display
settings in the registry, not just one output gets restored.
Signed-off-by: Zhiyi Zhang <zzhang at codeweavers.com>
---
dlls/d3d8/tests/device.c | 383 +++++++++++++++++++++++++++++++++++++--
1 file changed, 372 insertions(+), 11 deletions(-)
diff --git a/dlls/d3d8/tests/device.c b/dlls/d3d8/tests/device.c
index f48a51cee85..8c7737f6601 100644
--- a/dlls/d3d8/tests/device.c
+++ b/dlls/d3d8/tests/device.c
@@ -114,6 +114,14 @@ static BOOL adapter_is_warp(const D3DADAPTER_IDENTIFIER8 *identifier)
return !strcmp(identifier->Driver, "d3d10warp.dll");
}
+static BOOL equal_mode_rect(const DEVMODEW *mode1, const DEVMODEW *mode2)
+{
+ return mode1->dmPosition.x == mode2->dmPosition.x
+ && mode1->dmPosition.y == mode2->dmPosition.y
+ && mode1->dmPelsWidth == mode2->dmPelsWidth
+ && mode1->dmPelsHeight == mode2->dmPelsHeight;
+}
+
/* Free original_modes after finished using it */
static BOOL save_display_modes(DEVMODEW **original_modes, unsigned int *display_count)
{
@@ -4176,13 +4184,17 @@ static void test_unsupported_shaders(void)
static void test_mode_change(void)
{
+ DEVMODEW old_devmode, devmode, devmode2, *original_modes = NULL;
+ struct device_desc device_desc, device_desc2;
+ WCHAR second_monitor_name[CCHDEVICENAME];
+ IDirect3DDevice8 *device, *device2;
+ unsigned int display_count = 0;
RECT d3d_rect, focus_rect, r;
- struct device_desc device_desc;
IDirect3DSurface8 *backbuffer;
- IDirect3DDevice8 *device;
+ MONITORINFOEXW monitor_info;
+ HMONITOR second_monitor;
D3DSURFACE_DESC desc;
IDirect3D8 *d3d8;
- DEVMODEW devmode;
ULONG refcount;
UINT adapter_mode_count, i;
HRESULT hr;
@@ -4191,6 +4203,15 @@ static void test_mode_change(void)
D3DDISPLAYMODE d3ddm;
DWORD d3d_width = 0, d3d_height = 0, user32_width = 0, user32_height = 0;
+ memset(&devmode, 0, sizeof(devmode));
+ devmode.dmSize = sizeof(devmode);
+ ret = EnumDisplaySettingsW(NULL, ENUM_CURRENT_SETTINGS, &devmode);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ ok(equal_mode_rect(&devmode, ®istry_mode), "Got a different mode.\n");
+ ret = EnumDisplaySettingsW(NULL, ENUM_REGISTRY_SETTINGS, &devmode);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ ok(equal_mode_rect(&devmode, ®istry_mode), "Got a different mode.\n");
+
d3d8 = Direct3DCreate8(D3D_SDK_VERSION);
ok(!!d3d8, "Failed to create a D3D object.\n");
@@ -4245,6 +4266,9 @@ static void test_mode_change(void)
return;
}
+ ret = save_display_modes(&original_modes, &display_count);
+ ok(ret, "Failed to save original display modes.\n");
+
memset(&devmode, 0, sizeof(devmode));
devmode.dmSize = sizeof(devmode);
devmode.dmFields = DM_PELSWIDTH | DM_PELSHEIGHT;
@@ -4271,8 +4295,6 @@ static void test_mode_change(void)
if (!(device = create_device(d3d8, focus_window, &device_desc)))
{
skip("Failed to create a D3D device, skipping tests.\n");
- change_ret = ChangeDisplaySettingsW(NULL, CDS_FULLSCREEN);
- ok(change_ret == DISP_CHANGE_SUCCESSFUL, "Failed to change display mode, ret %#x.\n", change_ret);
goto done;
}
@@ -4324,8 +4346,13 @@ static void test_mode_change(void)
device_desc.width = registry_mode.dmPelsWidth;
device_desc.height = registry_mode.dmPelsHeight;
device_desc.flags = CREATE_DEVICE_FULLSCREEN;
- ok(!!(device = create_device(d3d8, focus_window, &device_desc)), "Failed to create a D3D device.\n");
+ if (!(device = create_device(d3d8, focus_window, &device_desc)))
+ {
+ skip("Failed to create a D3D device, skipping tests.\n");
+ goto done;
+ }
+ devmode.dmFields = DM_PELSWIDTH | DM_PELSHEIGHT;
devmode.dmPelsWidth = user32_width;
devmode.dmPelsHeight = user32_height;
change_ret = ChangeDisplaySettingsW(&devmode, CDS_FULLSCREEN);
@@ -4334,17 +4361,351 @@ static void test_mode_change(void)
refcount = IDirect3DDevice8_Release(device);
ok(!refcount, "Device has %u references left.\n", refcount);
- ret = EnumDisplaySettingsW(NULL, ENUM_CURRENT_SETTINGS, &devmode);
+ memset(&devmode2, 0, sizeof(devmode2));
+ devmode2.dmSize = sizeof(devmode2);
+ ret = EnumDisplaySettingsW(NULL, ENUM_CURRENT_SETTINGS, &devmode2);
ok(ret, "Failed to get display mode.\n");
- ok(devmode.dmPelsWidth == registry_mode.dmPelsWidth
- && devmode.dmPelsHeight == registry_mode.dmPelsHeight,
- "Expected resolution %ux%u, got %ux%u.\n",
- registry_mode.dmPelsWidth, registry_mode.dmPelsHeight, devmode.dmPelsWidth, devmode.dmPelsHeight);
+ ok(devmode2.dmPelsWidth == registry_mode.dmPelsWidth
+ && devmode2.dmPelsHeight == registry_mode.dmPelsHeight,
+ "Expected resolution %ux%u, got %ux%u.\n", registry_mode.dmPelsWidth,
+ registry_mode.dmPelsHeight, devmode2.dmPelsWidth, devmode2.dmPelsHeight);
+ ret = restore_display_modes(original_modes, display_count);
+ ok(ret, "Failed to restore display modes.\n");
+
+ /* Test that no mode restorations if no mode changes happened */
+ change_ret = ChangeDisplaySettingsW(&devmode, CDS_UPDATEREGISTRY | CDS_NORESET);
+ ok(change_ret == DISP_CHANGE_SUCCESSFUL, "ChangeDisplaySettingsW failed with %d.\n", change_ret);
+
+ device_desc.adapter_ordinal = D3DADAPTER_DEFAULT;
+ device_desc.device_window = device_window;
+ device_desc.width = d3d_width;
+ device_desc.height = d3d_height;
+ device_desc.flags = 0;
+ device = create_device(d3d8, device_window, &device_desc);
+ ok(!!device, "Failed to create a D3D device.\n");
+ refcount = IDirect3DDevice8_Release(device);
+ ok(!refcount, "Device has %u references left.\n", refcount);
+
+ ret = EnumDisplaySettingsW(NULL, ENUM_CURRENT_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ ok(equal_mode_rect(&devmode2, ®istry_mode), "Got a different mode.\n");
+ ret = restore_display_modes(original_modes, display_count);
+ ok(ret, "Failed to restore display modes.\n");
+
+ /* Test that mode restorations use display settings in the registry with a fullscreen device */
+ change_ret = ChangeDisplaySettingsW(&devmode, CDS_UPDATEREGISTRY | CDS_NORESET);
+ ok(change_ret == DISP_CHANGE_SUCCESSFUL, "ChangeDisplaySettingsW failed with %d.\n", change_ret);
+
+ device_desc.adapter_ordinal = D3DADAPTER_DEFAULT;
+ device_desc.device_window = device_window;
+ device_desc.width = registry_mode.dmPelsWidth;
+ device_desc.height = registry_mode.dmPelsHeight;
+ device_desc.flags = CREATE_DEVICE_FULLSCREEN;
+ if (!(device = create_device(d3d8, device_window, &device_desc)))
+ {
+ skip("Failed to create a D3D device, skipping tests.\n");
+ goto done;
+ }
+ refcount = IDirect3DDevice8_Release(device);
+ ok(!refcount, "Device has %u references left.\n", refcount);
+
+ ret = EnumDisplaySettingsW(NULL, ENUM_CURRENT_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ todo_wine ok(equal_mode_rect(&devmode2, &devmode), "Got a different mode.\n");
+ ret = EnumDisplaySettingsW(NULL, ENUM_REGISTRY_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ ok(equal_mode_rect(&devmode2, &devmode), "Got a different mode.\n");
+ ret = restore_display_modes(original_modes, display_count);
+ ok(ret, "Failed to restore display modes.\n");
+
+ /* Test that mode restorations use display settings in the registry with a fullscreen device
+ * having the same display mode and then reset to a different mode */
+ change_ret = ChangeDisplaySettingsW(&devmode, CDS_UPDATEREGISTRY | CDS_NORESET);
+ ok(change_ret == DISP_CHANGE_SUCCESSFUL, "ChangeDisplaySettingsW failed with %d.\n", change_ret);
+
+ device_desc.adapter_ordinal = D3DADAPTER_DEFAULT;
+ device_desc.device_window = device_window;
+ device_desc.width = registry_mode.dmPelsWidth;
+ device_desc.height = registry_mode.dmPelsHeight;
+ device_desc.flags = CREATE_DEVICE_FULLSCREEN;
+ if (!(device = create_device(d3d8, device_window, &device_desc)))
+ {
+ skip("Failed to create a D3D device, skipping tests.\n");
+ goto done;
+ }
+
+ device_desc.width = d3d_width;
+ device_desc.height = d3d_height;
+ hr = reset_device(device, &device_desc);
+ ok(hr == D3D_OK, "Failed to reset device, hr %#x.\n", hr);
+ ret = EnumDisplaySettingsW(NULL, ENUM_CURRENT_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ ok(devmode2.dmPelsWidth == d3d_width && devmode2.dmPelsHeight == d3d_height,
+ "Expected resolution %ux%u, got %ux%u.\n", d3d_width, d3d_height,
+ devmode2.dmPelsWidth, devmode2.dmPelsHeight);
+
+ refcount = IDirect3DDevice8_Release(device);
+ ok(!refcount, "Device has %u references left.\n", refcount);
+
+ ret = EnumDisplaySettingsW(NULL, ENUM_CURRENT_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ todo_wine ok(equal_mode_rect(&devmode2, &devmode), "Got a different mode.\n");
+ ret = EnumDisplaySettingsW(NULL, ENUM_REGISTRY_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ ok(equal_mode_rect(&devmode2, &devmode), "Got a different mode.\n");
+ ret = restore_display_modes(original_modes, display_count);
+ ok(ret, "Failed to restore display modes.\n");
+
+ if (IDirect3D8_GetAdapterCount(d3d8) < 2)
+ {
+ skip("Following tests require two adapters.\n");
+ goto done;
+ }
+
+ second_monitor = IDirect3D8_GetAdapterMonitor(d3d8, 1);
+ monitor_info.cbSize = sizeof(monitor_info);
+ ret = GetMonitorInfoW(second_monitor, (MONITORINFO *)&monitor_info);
+ ok(ret, "GetMonitorInfoW failed, error %#x.\n", GetLastError());
+ lstrcpyW(second_monitor_name, monitor_info.szDevice);
+
+ memset(&old_devmode, 0, sizeof(old_devmode));
+ old_devmode.dmSize = sizeof(old_devmode);
+ ret = EnumDisplaySettingsW(second_monitor_name, ENUM_CURRENT_SETTINGS, &old_devmode);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+
+ i = 0;
+ d3d_width = 0;
+ d3d_height = 0;
+ user32_width = 0;
+ user32_height = 0;
+ while (EnumDisplaySettingsW(second_monitor_name, i++, &devmode))
+ {
+ if (devmode.dmPelsWidth == old_devmode.dmPelsWidth
+ && devmode.dmPelsHeight == old_devmode.dmPelsHeight)
+ continue;
+
+ if (!d3d_width && !d3d_height)
+ {
+ d3d_width = devmode.dmPelsWidth;
+ d3d_height = devmode.dmPelsHeight;
+ continue;
+ }
+
+ if (devmode.dmPelsWidth == d3d_width && devmode.dmPelsHeight == d3d_height)
+ continue;
+
+ user32_width = devmode.dmPelsWidth;
+ user32_height = devmode.dmPelsHeight;
+ break;
+ }
+ if (!user32_width || !user32_height)
+ {
+ skip("Failed to find three different display modes for the second monitor.\n");
+ goto done;
+ }
+
+ /* Test that mode restorations also happen for non-primary monitors on device resets */
+ device_desc.adapter_ordinal = D3DADAPTER_DEFAULT;
+ device_desc.device_window = device_window;
+ device_desc.width = registry_mode.dmPelsWidth;
+ device_desc.height = registry_mode.dmPelsHeight;
+ device_desc.flags = CREATE_DEVICE_FULLSCREEN;
+ if (!(device = create_device(d3d8, device_window, &device_desc)))
+ {
+ skip("Failed to create a D3D device.\n");
+ goto done;
+ }
+
+ change_ret = ChangeDisplaySettingsExW(second_monitor_name, &devmode, NULL, CDS_RESET, NULL);
+ ok(change_ret == DISP_CHANGE_SUCCESSFUL, "ChangeDisplaySettingsExW failed with %d.\n", change_ret);
+ ret = EnumDisplaySettingsW(second_monitor_name, ENUM_CURRENT_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ if (devmode2.dmPelsWidth == old_devmode.dmPelsWidth
+ && devmode2.dmPelsHeight == old_devmode.dmPelsHeight)
+ {
+ skip("Failed to change display settings of the second monitor.\n");
+ refcount = IDirect3DDevice8_Release(device);
+ ok(!refcount, "Device has %u references left.\n", refcount);
+ goto done;
+ }
+
+ device_desc.flags = 0;
+ hr = reset_device(device, &device_desc);
+ ok(hr == D3D_OK, "Failed to reset device, hr %#x.\n", hr);
+
+ ret = EnumDisplaySettingsW(second_monitor_name, ENUM_CURRENT_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ todo_wine ok(equal_mode_rect(&devmode2, &old_devmode), "Got a different mode.\n");
+ ret = EnumDisplaySettingsW(second_monitor_name, ENUM_REGISTRY_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ ok(equal_mode_rect(&devmode2, &old_devmode), "Got a different mode.\n");
+ hr = IDirect3D8_GetAdapterDisplayMode(d3d8, 1, &d3ddm);
+ ok(hr == S_OK, "GetAdapterDisplayMode failed, hr %#x.\n", hr);
+ todo_wine ok(d3ddm.Width == old_devmode.dmPelsWidth, "Expected width %u, got %u.\n",
+ old_devmode.dmPelsWidth, d3ddm.Width);
+ todo_wine ok(d3ddm.Height == old_devmode.dmPelsHeight, "Expected height %u, got %u.\n",
+ old_devmode.dmPelsHeight, d3ddm.Height);
+
+ refcount = IDirect3DDevice8_Release(device);
+ ok(!refcount, "Device has %u references left.\n", refcount);
+ ret = restore_display_modes(original_modes, display_count);
+ ok(ret, "Failed to restore display modes.\n");
+
+ /* Test that mode restorations happen for non-primary monitors on device releases */
+ device_desc.adapter_ordinal = D3DADAPTER_DEFAULT;
+ device_desc.device_window = device_window;
+ device_desc.width = registry_mode.dmPelsWidth;
+ device_desc.height = registry_mode.dmPelsHeight;
+ device_desc.flags = CREATE_DEVICE_FULLSCREEN;
+ if (!(device = create_device(d3d8, device_window, &device_desc)))
+ {
+ skip("Failed to create a D3D device.\n");
+ goto done;
+ }
+
+ change_ret = ChangeDisplaySettingsExW(second_monitor_name, &devmode, NULL, CDS_RESET, NULL);
+ ok(change_ret == DISP_CHANGE_SUCCESSFUL, "ChangeDisplaySettingsExW failed with %d.\n", change_ret);
+
+ refcount = IDirect3DDevice8_Release(device);
+ ok(!refcount, "Device has %u references left.\n", refcount);
+
+ ret = EnumDisplaySettingsW(second_monitor_name, ENUM_CURRENT_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ todo_wine ok(equal_mode_rect(&devmode2, &old_devmode), "Got a different mode.\n");
+ ret = EnumDisplaySettingsW(second_monitor_name, ENUM_REGISTRY_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ ok(equal_mode_rect(&devmode2, &old_devmode), "Got a different mode.\n");
+ hr = IDirect3D8_GetAdapterDisplayMode(d3d8, 1, &d3ddm);
+ ok(hr == S_OK, "GetAdapterDisplayMode failed, hr %#x.\n", hr);
+ todo_wine ok(d3ddm.Width == old_devmode.dmPelsWidth, "Expected width %u, got %u.\n",
+ old_devmode.dmPelsWidth, d3ddm.Width);
+ todo_wine ok(d3ddm.Height == old_devmode.dmPelsHeight, "Expected height %u, got %u.\n",
+ old_devmode.dmPelsHeight, d3ddm.Height);
+ ret = restore_display_modes(original_modes, display_count);
+ ok(ret, "Failed to restore display modes.\n");
+
+ /* Test that mode restorations for non-primary monitors use display settings in the registry */
+ if (!(device = create_device(d3d8, device_window, &device_desc)))
+ {
+ skip("Failed to create a D3D device.\n");
+ goto done;
+ }
+
+ change_ret = ChangeDisplaySettingsExW(second_monitor_name, &devmode, NULL,
+ CDS_UPDATEREGISTRY | CDS_NORESET, NULL);
+ ok(change_ret == DISP_CHANGE_SUCCESSFUL, "ChangeDisplaySettingsExW failed with %d.\n", change_ret);
+
+ refcount = IDirect3DDevice8_Release(device);
+ ok(!refcount, "Device has %u references left.\n", refcount);
+
+ ret = EnumDisplaySettingsW(second_monitor_name, ENUM_CURRENT_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ todo_wine ok(devmode2.dmPelsWidth == devmode.dmPelsWidth && devmode2.dmPelsHeight == devmode.dmPelsHeight,
+ "Expected resolution %ux%u, got %ux%u.\n", devmode.dmPelsWidth, devmode.dmPelsHeight,
+ devmode2.dmPelsWidth, devmode2.dmPelsHeight);
+ ret = EnumDisplaySettingsW(second_monitor_name, ENUM_REGISTRY_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ ok(devmode2.dmPelsWidth == devmode.dmPelsWidth && devmode2.dmPelsHeight == devmode.dmPelsHeight,
+ "Expected resolution %ux%u, got %ux%u.\n", devmode.dmPelsWidth, devmode.dmPelsHeight,
+ devmode2.dmPelsWidth, devmode2.dmPelsHeight);
+ hr = IDirect3D8_GetAdapterDisplayMode(d3d8, 1, &d3ddm);
+ ok(hr == S_OK, "GetAdapterDisplayMode failed, hr %#x.\n", hr);
+ todo_wine ok(d3ddm.Width == devmode.dmPelsWidth && d3ddm.Height == devmode.dmPelsHeight,
+ "Expected resolution %ux%u, got %ux%u.\n", devmode.dmPelsWidth, devmode.dmPelsHeight,
+ d3ddm.Width, d3ddm.Height);
+ ret = restore_display_modes(original_modes, display_count);
+ ok(ret, "Failed to restore display modes.\n");
+
+ /* Test mode restorations when there are two fullscreen devices and one of them got reset */
+ if (!(device = create_device(d3d8, focus_window, &device_desc)))
+ {
+ skip("Failed to create a D3D device.\n");
+ goto done;
+ }
+
+ device_desc2.adapter_ordinal = 1;
+ device_desc2.device_window = device_window;
+ device_desc2.width = d3d_width;
+ device_desc2.height = d3d_height;
+ device_desc2.flags = CREATE_DEVICE_FULLSCREEN;
+ if (!(device2 = create_device(d3d8, focus_window, &device_desc2)))
+ {
+ skip("Failed to create a D3D device.\n");
+ refcount = IDirect3DDevice8_Release(device);
+ ok(!refcount, "Device has %u references left.\n", refcount);
+ goto done;
+ }
+
+ change_ret = ChangeDisplaySettingsExW(second_monitor_name, &devmode, NULL, CDS_RESET, NULL);
+ ok(change_ret == DISP_CHANGE_SUCCESSFUL, "ChangeDisplaySettingsExW failed with %d.\n", change_ret);
+
+ device_desc.flags = 0;
+ hr = reset_device(device, &device_desc);
+ ok(hr == D3D_OK, "Failed to reset device, hr %#x.\n", hr);
+
+ ret = EnumDisplaySettingsW(second_monitor_name, ENUM_CURRENT_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ todo_wine ok(equal_mode_rect(&devmode2, &old_devmode), "Got a different mode.\n");
+ ret = EnumDisplaySettingsW(second_monitor_name, ENUM_REGISTRY_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ ok(equal_mode_rect(&devmode2, &old_devmode), "Got a different mode.\n");
+ hr = IDirect3D8_GetAdapterDisplayMode(d3d8, 1, &d3ddm);
+ ok(hr == S_OK, "GetAdapterDisplayMode failed, hr %#x.\n", hr);
+ todo_wine ok(d3ddm.Width == old_devmode.dmPelsWidth && d3ddm.Height == old_devmode.dmPelsHeight,
+ "Expected resolution %ux%u, got %ux%u.\n", old_devmode.dmPelsWidth,
+ old_devmode.dmPelsHeight, d3ddm.Width, d3ddm.Height);
+
+ refcount = IDirect3DDevice8_Release(device2);
+ ok(!refcount, "Device has %u references left.\n", refcount);
+ refcount = IDirect3DDevice8_Release(device);
+ ok(!refcount, "Device has %u references left.\n", refcount);
+ ret = restore_display_modes(original_modes, display_count);
+ ok(ret, "Failed to restore display modes.\n");
+
+ /* Test mode restoration when there are two fullscreen devices and one of them got released */
+ device_desc.flags = CREATE_DEVICE_FULLSCREEN;
+ if (!(device = create_device(d3d8, focus_window, &device_desc)))
+ {
+ skip("Failed to create a D3D device.\n");
+ goto done;
+ }
+
+ if (!(device2 = create_device(d3d8, focus_window, &device_desc2)))
+ {
+ skip("Failed to create a D3D device.\n");
+ refcount = IDirect3DDevice8_Release(device);
+ ok(!refcount, "Device has %u references left.\n", refcount);
+ goto done;
+ }
+
+ change_ret = ChangeDisplaySettingsExW(second_monitor_name, &devmode, NULL, CDS_RESET, NULL);
+ ok(change_ret == DISP_CHANGE_SUCCESSFUL, "ChangeDisplaySettingsExW failed with %d.\n", change_ret);
+
+ refcount = IDirect3DDevice8_Release(device);
+ ok(!refcount, "Device has %u references left.\n", refcount);
+
+ ret = EnumDisplaySettingsW(second_monitor_name, ENUM_CURRENT_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ todo_wine ok(equal_mode_rect(&devmode2, &old_devmode), "Got a different mode.\n");
+ ret = EnumDisplaySettingsW(second_monitor_name, ENUM_REGISTRY_SETTINGS, &devmode2);
+ ok(ret, "EnumDisplaySettingsW failed, error %#x.\n", GetLastError());
+ ok(equal_mode_rect(&devmode2, &old_devmode), "Got a different mode.\n");
+ hr = IDirect3D8_GetAdapterDisplayMode(d3d8, 1, &d3ddm);
+ ok(hr == S_OK, "GetAdapterDisplayMode failed, hr %#x.\n", hr);
+ todo_wine ok(d3ddm.Width == old_devmode.dmPelsWidth && d3ddm.Height == old_devmode.dmPelsHeight,
+ "Expected resolution %ux%u, got %ux%u.\n", old_devmode.dmPelsWidth,
+ old_devmode.dmPelsHeight, d3ddm.Width, d3ddm.Height);
+
+ refcount = IDirect3DDevice8_Release(device2);
+ ok(!refcount, "Device has %u references left.\n", refcount);
done:
DestroyWindow(device_window);
DestroyWindow(focus_window);
IDirect3D8_Release(d3d8);
+ ret = restore_display_modes(original_modes, display_count);
+ ok(ret, "Failed to restore display modes.\n");
+ heap_free(original_modes);
}
static void test_device_window_reset(void)
--
2.27.0
More information about the wine-devel
mailing list