[D3D] Some Clear / COLORFILL work
Lionel Ulmer
lionel.ulmer at free.fr
Fri Jun 13 13:30:49 CDT 2003
Changelog:
- fixes the COLORFILL case for front-buffer
- some preparations for GL-accelerated Blts
- some small optimizations in the Clear code
Lionel
--
Lionel Ulmer - http://www.bbrox.org/
-------------- next part --------------
--- dlls/ddraw_CVS/d3ddevice/mesa.c Sat Jun 7 18:53:08 2003
+++ dlls/ddraw/d3ddevice/mesa.c Fri Jun 13 20:26:06 2003
@@ -2373,6 +2373,7 @@
#endif
static HRESULT d3ddevice_clear(IDirect3DDeviceImpl *This,
+ WINE_GL_BUFFER_TYPE buffer_type,
DWORD dwCount,
LPD3DRECT lpRects,
DWORD dwFlags,
@@ -2382,10 +2383,7 @@
{
IDirect3DDeviceGLImpl *glThis = (IDirect3DDeviceGLImpl *) This;
GLboolean ztest;
- GLfloat old_z_clear_value;
GLbitfield bitfield = 0;
- GLint old_stencil_clear_value;
- GLfloat old_color_clear_value[4];
D3DRECT rect;
int i;
@@ -2401,7 +2399,6 @@
}
if (dwCount == 0) {
- /* Not sure if this is really needed... */
dwCount = 1;
rect.u1.x1 = 0;
rect.u2.y1 = 0;
@@ -2413,29 +2410,28 @@
/* Clears the screen */
ENTER_GL();
- if (glThis->state[WINE_GL_BUFFER_BACK] == SURFACE_MEMORY_DIRTY) {
- /* TODO: optimize here the case where Clear changes all the screen... */
- This->flush_to_framebuffer(This, &(glThis->lock_rect[WINE_GL_BUFFER_BACK]), glThis->lock_surf[WINE_GL_BUFFER_BACK]);
+ if (dwFlags & D3DCLEAR_TARGET) {
+ if (glThis->state[buffer_type] == SURFACE_MEMORY_DIRTY) {
+ /* TODO: optimize here the case where Clear changes all the screen... */
+ This->flush_to_framebuffer(This, &(glThis->lock_rect[buffer_type]), glThis->lock_surf[buffer_type]);
+ }
+ glThis->state[buffer_type] = SURFACE_GL;
}
- glThis->state[WINE_GL_BUFFER_BACK] = SURFACE_GL;
if (dwFlags & D3DCLEAR_ZBUFFER) {
bitfield |= GL_DEPTH_BUFFER_BIT;
glGetBooleanv(GL_DEPTH_WRITEMASK, &ztest);
glDepthMask(GL_TRUE); /* Enables Z writing to be sure to delete also the Z buffer */
- glGetFloatv(GL_DEPTH_CLEAR_VALUE, &old_z_clear_value);
glClearDepth(dvZ);
TRACE(" depth value : %f\n", dvZ);
}
if (dwFlags & D3DCLEAR_STENCIL) {
bitfield |= GL_STENCIL_BUFFER_BIT;
- glGetIntegerv(GL_STENCIL_CLEAR_VALUE, &old_stencil_clear_value);
glClearStencil(dwStencil);
TRACE(" stencil value : %ld\n", dwStencil);
}
if (dwFlags & D3DCLEAR_TARGET) {
bitfield |= GL_COLOR_BUFFER_BIT;
- glGetFloatv(GL_COLOR_CLEAR_VALUE, old_color_clear_value);
glClearColor(((dwColor >> 16) & 0xFF) / 255.0,
((dwColor >> 8) & 0xFF) / 255.0,
((dwColor >> 0) & 0xFF) / 255.0,
@@ -2452,19 +2448,7 @@
glDisable(GL_SCISSOR_TEST);
if (dwFlags & D3DCLEAR_ZBUFFER) {
- glDepthMask(ztest);
- glClearDepth(old_z_clear_value);
- }
- if (dwFlags & D3DCLEAR_STENCIL) {
- bitfield |= GL_STENCIL_BUFFER_BIT;
- glClearStencil(old_stencil_clear_value);
- }
- if (dwFlags & D3DCLEAR_TARGET) {
- bitfield |= GL_COLOR_BUFFER_BIT;
- glClearColor(old_color_clear_value[0],
- old_color_clear_value[1],
- old_color_clear_value[2],
- old_color_clear_value[3]);
+ if (ztest == 0) glDepthMask(ztest);
}
LEAVE_GL();
@@ -2472,28 +2456,64 @@
return DD_OK;
}
+static HRESULT d3ddevice_clear_back(IDirect3DDeviceImpl *This,
+ DWORD dwCount,
+ LPD3DRECT lpRects,
+ DWORD dwFlags,
+ DWORD dwColor,
+ D3DVALUE dvZ,
+ DWORD dwStencil)
+{
+ return d3ddevice_clear(This, WINE_GL_BUFFER_BACK, dwCount, lpRects, dwFlags, dwColor, dvZ, dwStencil);
+}
+
HRESULT
d3ddevice_blt(IDirectDrawSurfaceImpl *This, LPRECT rdst,
LPDIRECTDRAWSURFACE7 src, LPRECT rsrc,
DWORD dwFlags, LPDDBLTFX lpbltfx)
{
+ IDirect3DDeviceGLImpl *gl_d3d_dev = (IDirect3DDeviceGLImpl *) This->d3ddevice;
+ WINE_GL_BUFFER_TYPE buffer_type;
+ D3DRECT rect;
+
+ /* First check if we BLT to the backbuffer... */
+ if ((This->surface_desc.ddsCaps.dwCaps & (DDSCAPS_BACKBUFFER)) != 0) {
+ buffer_type = WINE_GL_BUFFER_BACK;
+ } else if ((This->surface_desc.ddsCaps.dwCaps & (DDSCAPS_FRONTBUFFER|DDSCAPS_PRIMARYSURFACE)) != 0) {
+ buffer_type = WINE_GL_BUFFER_FRONT;
+ } else {
+ ERR("Only BLT override to front or back-buffer is supported for now !\n");
+ return DDERR_INVALIDPARAMS;
+ }
+
+ if (rdst) {
+ rect.u1.x1 = rdst->left;
+ rect.u2.y1 = rdst->top;
+ rect.u3.x2 = rdst->right;
+ rect.u4.y2 = rdst->bottom;
+ } else {
+ rect.u1.x1 = 0;
+ rect.u2.y1 = 0;
+ rect.u3.x2 = This->surface_desc.dwWidth;
+ rect.u4.y2 = This->surface_desc.dwHeight;
+ }
+
+ if ((gl_d3d_dev->state[buffer_type] == SURFACE_MEMORY_DIRTY) &&
+ (rect.u1.x1 >= gl_d3d_dev->lock_rect[buffer_type].left) &&
+ (rect.u2.y1 >= gl_d3d_dev->lock_rect[buffer_type].top) &&
+ (rect.u3.x2 <= gl_d3d_dev->lock_rect[buffer_type].right) &&
+ (rect.u4.y2 <= gl_d3d_dev->lock_rect[buffer_type].bottom)) {
+ /* If the memory zone is already dirty, use the standard 'in memory' blit operations and not
+ * GL to do it.
+ */
+ return DDERR_INVALIDPARAMS;
+ }
+
if (dwFlags & DDBLT_COLORFILL) {
/* This is easy to handle for the D3D Device... */
DWORD color;
- D3DRECT rect;
GLenum prev_draw;
- BOOL is_front;
- /* First check if we BLT to the backbuffer... */
- if ((This->surface_desc.ddsCaps.dwCaps & (DDSCAPS_BACKBUFFER)) != 0) {
- is_front = FALSE;
- } else if ((This->surface_desc.ddsCaps.dwCaps & (DDSCAPS_FRONTBUFFER|DDSCAPS_PRIMARYSURFACE)) != 0) {
- is_front = TRUE;
- } else {
- ERR("Only BLT override to front or back-buffer is supported for now !\n");
- return DDERR_INVALIDPARAMS;
- }
-
/* The color as given in the Blt function is in the format of the frame-buffer...
* 'clear' expect it in ARGB format => we need to do some conversion :-)
*/
@@ -2538,25 +2558,18 @@
TRACE(" executing D3D Device override.\n");
- if (rdst) {
- rect.u1.x1 = rdst->left;
- rect.u2.y1 = rdst->top;
- rect.u3.x2 = rdst->right;
- rect.u4.y2 = rdst->bottom;
- }
-
ENTER_GL();
glGetIntegerv(GL_DRAW_BUFFER, &prev_draw);
- if (is_front)
+ if (buffer_type == WINE_GL_BUFFER_FRONT)
glDrawBuffer(GL_FRONT);
else
glDrawBuffer(GL_BACK);
- d3ddevice_clear(This->d3ddevice, rdst != NULL ? 1 : 0, &rect, D3DCLEAR_TARGET, color, 0.0, 0x00000000);
+ d3ddevice_clear(This->d3ddevice, buffer_type, 1, &rect, D3DCLEAR_TARGET, color, 0.0, 0x00000000);
- if ((( is_front) && (prev_draw == GL_BACK)) ||
- ((!is_front) && (prev_draw == GL_FRONT)))
+ if (((buffer_type == WINE_GL_BUFFER_FRONT) && (prev_draw == GL_BACK)) ||
+ ((buffer_type == WINE_GL_BUFFER_BACK) && (prev_draw == GL_FRONT)))
glDrawBuffer(prev_draw);
LEAVE_GL();
@@ -3138,7 +3151,7 @@
object->d3d = d3d;
object->surface = surface;
object->set_context = set_context;
- object->clear = d3ddevice_clear;
+ object->clear = d3ddevice_clear_back;
object->set_matrices = d3ddevice_set_matrices;
object->matrices_updated = d3ddevice_matrices_updated;
object->flush_to_framebuffer = d3ddevice_flush_to_frame_buffer;
More information about the wine-patches
mailing list