winmm: Update English resource
Ken Sharp
kennybobs at o2.co.uk
Mon Jun 14 22:51:20 CDT 2010
---
dlls/winmm/winmm_En.rc | 345 ++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 345 insertions(+), 0 deletions(-)
diff --git a/dlls/winmm/winmm_En.rc b/dlls/winmm/winmm_En.rc
index 1a945d8..b6e5bad 100644
--- a/dlls/winmm/winmm_En.rc
+++ b/dlls/winmm/winmm_En.rc
@@ -1,5 +1,6 @@
/*
* Copyright 1999 Eric Pouech
+ * Copyright 2010 Ken Sharp
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
@@ -127,3 +128,347 @@ MCIERR_SEQ_PORTUNSPECIFIED, "The system doesn't have a current MIDI port specif
MCIERR_SEQ_TIMER, "All multimedia timers are being used by other applications. Quit one of these applications; then, try again."
END
+
+/******************
+* Neutral English *
+******************/
+
+STRINGTABLE LANGUAGE LANG_ENGLISH, SUBLANG_NEUTRAL
+BEGIN
+
+/* MMSYS errors */
+MMSYSERR_NOERROR, "The specified command was carried out."
+MMSYSERR_ERROR, "Undefined external error."
+MMSYSERR_BADDEVICEID, "A device ID has been used that is out of range for your system."
+MMSYSERR_NOTENABLED, "The driver was not enabled."
+MMSYSERR_ALLOCATED, "The specified device is already in use. Wait until it is free, and then try again."
+MMSYSERR_INVALHANDLE, "The specified device handle is invalid."
+MMSYSERR_NODRIVER, "There is no driver installed on your system !\n"
+MMSYSERR_NOMEM, "Not enough memory available for this task. Quit one or more applications to increase available memory, and then try again."
+MMSYSERR_NOTSUPPORTED, "This function is not supported. Use the Capabilities function to determine which functions and messages the driver supports."
+MMSYSERR_BADERRNUM, "An error number was specified that is not defined in the system."
+MMSYSERR_INVALFLAG, "An invalid flag was passed to a system function."
+MMSYSERR_INVALPARAM, "An invalid parameter was passed to a system function."
+
+/* WAVE errors */
+WAVERR_BADFORMAT, "The specified format is not supported or cannot be translated. Use the Capabilities function to determine the supported formats"
+WAVERR_STILLPLAYING, "Cannot perform this operation while media data is still playing. Reset the device, or wait until the data is finished playing."
+WAVERR_UNPREPARED, "The wave header was not prepared. Use the Prepare function to prepare the header, and then try again."
+WAVERR_SYNC, "Cannot open the device without using the WAVE_ALLOWSYNC flag. Use the flag, and then try again."
+
+/* MIDI errors */
+MIDIERR_UNPREPARED, "The MIDI header was not prepared. Use the Prepare function to prepare the header, and then try again."
+MIDIERR_STILLPLAYING, "Cannot perform this operation while media data is still playing. Reset the device, or wait until the data is finished playing."
+MIDIERR_NOMAP, "A MIDI map was not found. There may be a problem with the driver, or the MIDIMAP.CFG file may be corrupt or missing."
+MIDIERR_NOTREADY, "The port is transmitting data to the device. Wait until the data has been transmitted, and then try again."
+MIDIERR_NODEVICE, "The current MIDI Mapper setup refers to a MIDI device that is not installed on the system. Use MIDI Mapper to edit the setup."
+MIDIERR_INVALIDSETUP, "The current MIDI setup is damaged. Copy the original MIDIMAP.CFG file to the Windows SYSTEM directory, and then try again."
+
+/* MCI errors */
+MCIERR_INVALID_DEVICE_ID, "Invalid MCI device ID. Use the ID returned when opening the MCI device."
+MCIERR_UNRECOGNIZED_KEYWORD, "The driver cannot recognise the specified command parameter."
+MCIERR_UNRECOGNIZED_COMMAND, "The driver cannot recognise the specified command."
+MCIERR_HARDWARE, "There is a problem with your media device. Make sure it is working correctly or contact the device manufacturer."
+MCIERR_INVALID_DEVICE_NAME, "The specified device is not open or is not recognised by MCI."
+MCIERR_OUT_OF_MEMORY, "Not enough memory available for this task.\nQuit one or more applications to increase available memory, and then try again."
+MCIERR_DEVICE_OPEN, "The device name is already being used as an alias by this application. Use a unique alias."
+MCIERR_CANNOT_LOAD_DRIVER, "There is an undetectable problem in loading the specified device driver."
+MCIERR_MISSING_COMMAND_STRING, "No command was specified."
+MCIERR_PARAM_OVERFLOW, "The output string was too large to fit in the return buffer. Increase the size of the buffer."
+MCIERR_MISSING_STRING_ARGUMENT, "The specified command requires a character-string parameter. Please provide one."
+MCIERR_BAD_INTEGER, "The specified integer is invalid for this command."
+MCIERR_PARSER_INTERNAL, "The device driver returned an invalid return type. Check with the device manufacturer about obtaining a new driver."
+MCIERR_DRIVER_INTERNAL, "There is a problem with the device driver. Check with the device manufacturer about obtaining a new driver."
+MCIERR_MISSING_PARAMETER, "The specified command requires a parameter. Please supply one."
+MCIERR_UNSUPPORTED_FUNCTION, "The MCI device you are using does not support the specified command."
+MCIERR_FILE_NOT_FOUND, "Cannot find the specified file. Make sure the path and filename are correct."
+MCIERR_DEVICE_NOT_READY, "The device driver is not ready."
+MCIERR_INTERNAL, "A problem occurred in initialising MCI. Try restarting Windows."
+MCIERR_DRIVER, "There is a problem with the device driver. The driver has closed. Cannot access error."
+MCIERR_CANNOT_USE_ALL, "Cannot use 'all' as the device name with the specified command."
+MCIERR_MULTIPLE, "Errors occurred in more than one device. Specify each command and device separately to determine which devices caused the error"
+MCIERR_EXTENSION_NOT_FOUND, "Cannot determine the device type from the given filename extension."
+MCIERR_OUTOFRANGE, "The specified parameter is out of range for the specified command."
+MCIERR_FLAGS_NOT_COMPATIBLE, "The specified parameters cannot be used together."
+MCIERR_FILE_NOT_SAVED, "Cannot save the specified file. Make sure you have enough disk space or are still connected to the network."
+MCIERR_DEVICE_TYPE_REQUIRED, "Cannot find the specified device. Make sure it is installed or that the device name is spelled correctly."
+MCIERR_DEVICE_LOCKED, "The specified device is now being closed. Wait a few seconds, and then try again."
+MCIERR_DUPLICATE_ALIAS, "The specified alias is already being used in this application. Use a unique alias."
+MCIERR_BAD_CONSTANT, "The specified parameter is invalid for this command."
+MCIERR_MUST_USE_SHAREABLE, "The device driver is already in use. To share it, use the 'shareable' parameter with each 'open' command."
+MCIERR_MISSING_DEVICE_NAME, "The specified command requires an alias, file, driver, or device name. Please supply one."
+MCIERR_BAD_TIME_FORMAT, "The specified value for the time format is invalid. Refer to the MCI documentation for valid formats."
+MCIERR_NO_CLOSING_QUOTE, "A closing double-quotation mark is missing from the parameter value. Please supply one."
+MCIERR_DUPLICATE_FLAGS, "A parameter or value was specified twice. Only specify it once."
+MCIERR_INVALID_FILE, "The specified file cannot be played on the specified MCI device. The file may be corrupt, or not in the correct format."
+MCIERR_NULL_PARAMETER_BLOCK, "A null parameter block was passed to MCI."
+MCIERR_UNNAMED_RESOURCE, "Cannot save an unnamed file. Supply a filename."
+MCIERR_NEW_REQUIRES_ALIAS, "You must specify an alias when using the 'new' parameter."
+MCIERR_NOTIFY_ON_AUTO_OPEN, "Cannot use the 'notify' flag with auto-opened devices."
+MCIERR_NO_ELEMENT_ALLOWED, "Cannot use a filename with the specified device."
+MCIERR_NONAPPLICABLE_FUNCTION, "Cannot carry out the commands in the order specified. Correct the command sequence, and then try again."
+MCIERR_ILLEGAL_FOR_AUTO_OPEN, "Cannot carry out the specified command on an auto-opened device. Wait until the device is closed, and then try again."
+MCIERR_FILENAME_REQUIRED, "The filename is invalid. Make sure the filename is not longer than 8 characters, followed by a period and an extension."
+MCIERR_EXTRA_CHARACTERS, "Cannot specify extra characters after a string enclosed in quotation marks."
+MCIERR_DEVICE_NOT_INSTALLED, "The specified device is not installed on the system. Use the Drivers option in Control Panel to install the device."
+MCIERR_GET_CD, "Cannot access the specified file or MCI device. Try changing directories or restarting your computer."
+MCIERR_SET_CD, "Cannot access the specified file or MCI device because the application cannot change directories."
+MCIERR_SET_DRIVE, "Cannot access specified file or MCI device because the application cannot change drives."
+MCIERR_DEVICE_LENGTH, "Specify a device or driver name that is less than 79 characters."
+MCIERR_DEVICE_ORD_LENGTH, "Specify a device or driver name that is less than 69 characters."
+MCIERR_NO_INTEGER, "The specified command requires an integer parameter. Please provide one."
+MCIERR_WAVE_OUTPUTSINUSE, "All wave devices that can play files in the current format are in use. Wait until a wave device is free, and then try again."
+MCIERR_WAVE_SETOUTPUTINUSE, "Cannot set the current wave device for play back because it is in use. Wait until the device is free, and then try again."
+MCIERR_WAVE_INPUTSINUSE, "All wave devices that can record files in the current format are in use. Wait until a wave device is free, and then try again."
+MCIERR_WAVE_SETINPUTINUSE, "Cannot set the current wave device for recording because it is in use. Wait until the device is free, and then try again."
+MCIERR_WAVE_OUTPUTUNSPECIFIED, "Any compatible waveform playback device may be used."
+MCIERR_WAVE_INPUTUNSPECIFIED, "Any compatible waveform recording device may be used."
+MCIERR_WAVE_OUTPUTSUNSUITABLE, "No wave device that can play files in the current format is installed. Use the Drivers option to install the wave device."
+MCIERR_WAVE_SETOUTPUTUNSUITABLE,"The device you are trying to play to cannot recognise the current file format."
+MCIERR_WAVE_INPUTSUNSUITABLE, "No wave device that can record files in the current format is installed. Use the Drivers option to install the wave device."
+MCIERR_WAVE_SETINPUTUNSUITABLE, "The device you are trying to record from cannot recognise the current file format."
+MCIERR_NO_WINDOW, "There is no display window."
+MCIERR_CREATEWINDOW, "Could not create or use window."
+MCIERR_FILE_READ, "Cannot read the specified file. Make sure the file is still present, or check your disk or network connection."
+MCIERR_FILE_WRITE, "Cannot write to the specified file. Make sure you have enough disk space or are still connected to the network."
+MCIERR_SEQ_DIV_INCOMPATIBLE, "The time formats of the ""song pointer"" and SMPTE are mutually exclusive. You can't use them together."
+MCIERR_SEQ_NOMIDIPRESENT, "The system has no installed MIDI devices. Use the Drivers option from the Control Panel to install a MIDI driver."
+MCIERR_SEQ_PORT_INUSE, "The specified MIDI port is already in use. Wait until it is free; the try again."
+MCIERR_SEQ_PORT_MAPNODEVICE, "The current MIDI Mapper setup refers to a MIDI device that is not installed on the system. Use the MIDI Mapper option from the Control Panel to edit the setup."
+MCIERR_SEQ_PORT_MISCERROR, "An error occurred with the specified port."
+MCIERR_SEQ_PORT_NONEXISTENT, "The specified MIDI device is not installed on the system. Use the Drivers option from the Control Panel to install a MIDI device."
+MCIERR_SEQ_PORTUNSPECIFIED, "The system doesn't have a current MIDI port specified."
+MCIERR_SEQ_TIMER, "All multimedia timers are being used by other applications. Quit one of these applications; then, try again."
+
+END
+
+
+/**************************
+* Canadian English *
+* Same as SUBLANG_DEFAULT *
+**************************/
+
+STRINGTABLE LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_CAN
+BEGIN
+
+/* MMSYS errors */
+MMSYSERR_NOERROR, "The specified command was carried out."
+MMSYSERR_ERROR, "Undefined external error."
+MMSYSERR_BADDEVICEID, "A device ID has been used that is out of range for your system."
+MMSYSERR_NOTENABLED, "The driver was not enabled."
+MMSYSERR_ALLOCATED, "The specified device is already in use. Wait until it is free, and then try again."
+MMSYSERR_INVALHANDLE, "The specified device handle is invalid."
+MMSYSERR_NODRIVER, "There is no driver installed on your system !\n"
+MMSYSERR_NOMEM, "Not enough memory available for this task. Quit one or more applications to increase available memory, and then try again."
+MMSYSERR_NOTSUPPORTED, "This function is not supported. Use the Capabilities function to determine which functions and messages the driver supports."
+MMSYSERR_BADERRNUM, "An error number was specified that is not defined in the system."
+MMSYSERR_INVALFLAG, "An invalid flag was passed to a system function."
+MMSYSERR_INVALPARAM, "An invalid parameter was passed to a system function."
+
+/* WAVE errors */
+WAVERR_BADFORMAT, "The specified format is not supported or cannot be translated. Use the Capabilities function to determine the supported formats"
+WAVERR_STILLPLAYING, "Cannot perform this operation while media data is still playing. Reset the device, or wait until the data is finished playing."
+WAVERR_UNPREPARED, "The wave header was not prepared. Use the Prepare function to prepare the header, and then try again."
+WAVERR_SYNC, "Cannot open the device without using the WAVE_ALLOWSYNC flag. Use the flag, and then try again."
+
+/* MIDI errors */
+MIDIERR_UNPREPARED, "The MIDI header was not prepared. Use the Prepare function to prepare the header, and then try again."
+MIDIERR_STILLPLAYING, "Cannot perform this operation while media data is still playing. Reset the device, or wait until the data is finished playing."
+MIDIERR_NOMAP, "A MIDI map was not found. There may be a problem with the driver, or the MIDIMAP.CFG file may be corrupt or missing."
+MIDIERR_NOTREADY, "The port is transmitting data to the device. Wait until the data has been transmitted, and then try again."
+MIDIERR_NODEVICE, "The current MIDI Mapper setup refers to a MIDI device that is not installed on the system. Use MIDI Mapper to edit the setup."
+MIDIERR_INVALIDSETUP, "The current MIDI setup is damaged. Copy the original MIDIMAP.CFG file to the Windows SYSTEM directory, and then try again."
+
+/* MCI errors */
+MCIERR_INVALID_DEVICE_ID, "Invalid MCI device ID. Use the ID returned when opening the MCI device."
+MCIERR_UNRECOGNIZED_KEYWORD, "The driver cannot recognize the specified command parameter."
+MCIERR_UNRECOGNIZED_COMMAND, "The driver cannot recognize the specified command."
+MCIERR_HARDWARE, "There is a problem with your media device. Make sure it is working correctly or contact the device manufacturer."
+MCIERR_INVALID_DEVICE_NAME, "The specified device is not open or is not recognized by MCI."
+MCIERR_OUT_OF_MEMORY, "Not enough memory available for this task.\nQuit one or more applications to increase available memory, and then try again."
+MCIERR_DEVICE_OPEN, "The device name is already being used as an alias by this application. Use a unique alias."
+MCIERR_CANNOT_LOAD_DRIVER, "There is an undetectable problem in loading the specified device driver."
+MCIERR_MISSING_COMMAND_STRING, "No command was specified."
+MCIERR_PARAM_OVERFLOW, "The output string was too large to fit in the return buffer. Increase the size of the buffer."
+MCIERR_MISSING_STRING_ARGUMENT, "The specified command requires a character-string parameter. Please provide one."
+MCIERR_BAD_INTEGER, "The specified integer is invalid for this command."
+MCIERR_PARSER_INTERNAL, "The device driver returned an invalid return type. Check with the device manufacturer about obtaining a new driver."
+MCIERR_DRIVER_INTERNAL, "There is a problem with the device driver. Check with the device manufacturer about obtaining a new driver."
+MCIERR_MISSING_PARAMETER, "The specified command requires a parameter. Please supply one."
+MCIERR_UNSUPPORTED_FUNCTION, "The MCI device you are using does not support the specified command."
+MCIERR_FILE_NOT_FOUND, "Cannot find the specified file. Make sure the path and filename are correct."
+MCIERR_DEVICE_NOT_READY, "The device driver is not ready."
+MCIERR_INTERNAL, "A problem occurred in initializing MCI. Try restarting Windows."
+MCIERR_DRIVER, "There is a problem with the device driver. The driver has closed. Cannot access error."
+MCIERR_CANNOT_USE_ALL, "Cannot use 'all' as the device name with the specified command."
+MCIERR_MULTIPLE, "Errors occurred in more than one device. Specify each command and device separately to determine which devices caused the error"
+MCIERR_EXTENSION_NOT_FOUND, "Cannot determine the device type from the given filename extension."
+MCIERR_OUTOFRANGE, "The specified parameter is out of range for the specified command."
+MCIERR_FLAGS_NOT_COMPATIBLE, "The specified parameters cannot be used together."
+MCIERR_FILE_NOT_SAVED, "Cannot save the specified file. Make sure you have enough disk space or are still connected to the network."
+MCIERR_DEVICE_TYPE_REQUIRED, "Cannot find the specified device. Make sure it is installed or that the device name is spelled correctly."
+MCIERR_DEVICE_LOCKED, "The specified device is now being closed. Wait a few seconds, and then try again."
+MCIERR_DUPLICATE_ALIAS, "The specified alias is already being used in this application. Use a unique alias."
+MCIERR_BAD_CONSTANT, "The specified parameter is invalid for this command."
+MCIERR_MUST_USE_SHAREABLE, "The device driver is already in use. To share it, use the 'shareable' parameter with each 'open' command."
+MCIERR_MISSING_DEVICE_NAME, "The specified command requires an alias, file, driver, or device name. Please supply one."
+MCIERR_BAD_TIME_FORMAT, "The specified value for the time format is invalid. Refer to the MCI documentation for valid formats."
+MCIERR_NO_CLOSING_QUOTE, "A closing double-quotation mark is missing from the parameter value. Please supply one."
+MCIERR_DUPLICATE_FLAGS, "A parameter or value was specified twice. Only specify it once."
+MCIERR_INVALID_FILE, "The specified file cannot be played on the specified MCI device. The file may be corrupt, or not in the correct format."
+MCIERR_NULL_PARAMETER_BLOCK, "A null parameter block was passed to MCI."
+MCIERR_UNNAMED_RESOURCE, "Cannot save an unnamed file. Supply a filename."
+MCIERR_NEW_REQUIRES_ALIAS, "You must specify an alias when using the 'new' parameter."
+MCIERR_NOTIFY_ON_AUTO_OPEN, "Cannot use the 'notify' flag with auto-opened devices."
+MCIERR_NO_ELEMENT_ALLOWED, "Cannot use a filename with the specified device."
+MCIERR_NONAPPLICABLE_FUNCTION, "Cannot carry out the commands in the order specified. Correct the command sequence, and then try again."
+MCIERR_ILLEGAL_FOR_AUTO_OPEN, "Cannot carry out the specified command on an auto-opened device. Wait until the device is closed, and then try again."
+MCIERR_FILENAME_REQUIRED, "The filename is invalid. Make sure the filename is not longer than 8 characters, followed by a period and an extension."
+MCIERR_EXTRA_CHARACTERS, "Cannot specify extra characters after a string enclosed in quotation marks."
+MCIERR_DEVICE_NOT_INSTALLED, "The specified device is not installed on the system. Use the Drivers option in Control Panel to install the device."
+MCIERR_GET_CD, "Cannot access the specified file or MCI device. Try changing directories or restarting your computer."
+MCIERR_SET_CD, "Cannot access the specified file or MCI device because the application cannot change directories."
+MCIERR_SET_DRIVE, "Cannot access specified file or MCI device because the application cannot change drives."
+MCIERR_DEVICE_LENGTH, "Specify a device or driver name that is less than 79 characters."
+MCIERR_DEVICE_ORD_LENGTH, "Specify a device or driver name that is less than 69 characters."
+MCIERR_NO_INTEGER, "The specified command requires an integer parameter. Please provide one."
+MCIERR_WAVE_OUTPUTSINUSE, "All wave devices that can play files in the current format are in use. Wait until a wave device is free, and then try again."
+MCIERR_WAVE_SETOUTPUTINUSE, "Cannot set the current wave device for play back because it is in use. Wait until the device is free, and then try again."
+MCIERR_WAVE_INPUTSINUSE, "All wave devices that can record files in the current format are in use. Wait until a wave device is free, and then try again."
+MCIERR_WAVE_SETINPUTINUSE, "Cannot set the current wave device for recording because it is in use. Wait until the device is free, and then try again."
+MCIERR_WAVE_OUTPUTUNSPECIFIED, "Any compatible waveform playback device may be used."
+MCIERR_WAVE_INPUTUNSPECIFIED, "Any compatible waveform recording device may be used."
+MCIERR_WAVE_OUTPUTSUNSUITABLE, "No wave device that can play files in the current format is installed. Use the Drivers option to install the wave device."
+MCIERR_WAVE_SETOUTPUTUNSUITABLE,"The device you are trying to play to cannot recognize the current file format."
+MCIERR_WAVE_INPUTSUNSUITABLE, "No wave device that can record files in the current format is installed. Use the Drivers option to install the wave device."
+MCIERR_WAVE_SETINPUTUNSUITABLE, "The device you are trying to record from cannot recognize the current file format."
+MCIERR_NO_WINDOW, "There is no display window."
+MCIERR_CREATEWINDOW, "Could not create or use window."
+MCIERR_FILE_READ, "Cannot read the specified file. Make sure the file is still present, or check your disk or network connection."
+MCIERR_FILE_WRITE, "Cannot write to the specified file. Make sure you have enough disk space or are still connected to the network."
+MCIERR_SEQ_DIV_INCOMPATIBLE, "The time formats of the ""song pointer"" and SMPTE are mutually exclusive. You can't use them together."
+MCIERR_SEQ_NOMIDIPRESENT, "The system has no installed MIDI devices. Use the Drivers option from the Control Panel to install a MIDI driver."
+MCIERR_SEQ_PORT_INUSE, "The specified MIDI port is already in use. Wait until it is free; the try again."
+MCIERR_SEQ_PORT_MAPNODEVICE, "The current MIDI Mapper setup refers to a MIDI device that is not installed on the system. Use the MIDI Mapper option from the Control Panel to edit the setup."
+MCIERR_SEQ_PORT_MISCERROR, "An error occurred with the specified port."
+MCIERR_SEQ_PORT_NONEXISTENT, "The specified MIDI device is not installed on the system. Use the Drivers option from the Control Panel to install a MIDI device."
+MCIERR_SEQ_PORTUNSPECIFIED, "The system doesn't have a current MIDI port specified."
+MCIERR_SEQ_TIMER, "All multimedia timers are being used by other applications. Quit one of these applications; then, try again."
+
+END
+
+/***********************************************
+* SUBLANG_ENGLISH_PHILIPPINES *
+* *
+* Philippine English follows US English rules *
+***********************************************/
+
+STRINGTABLE LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_PHILIPPINES
+
+BEGIN
+
+/* MMSYS errors */
+MMSYSERR_NOERROR, "The specified command was carried out."
+MMSYSERR_ERROR, "Undefined external error."
+MMSYSERR_BADDEVICEID, "A device ID has been used that is out of range for your system."
+MMSYSERR_NOTENABLED, "The driver was not enabled."
+MMSYSERR_ALLOCATED, "The specified device is already in use. Wait until it is free, and then try again."
+MMSYSERR_INVALHANDLE, "The specified device handle is invalid."
+MMSYSERR_NODRIVER, "There is no driver installed on your system !\n"
+MMSYSERR_NOMEM, "Not enough memory available for this task. Quit one or more applications to increase available memory, and then try again."
+MMSYSERR_NOTSUPPORTED, "This function is not supported. Use the Capabilities function to determine which functions and messages the driver supports."
+MMSYSERR_BADERRNUM, "An error number was specified that is not defined in the system."
+MMSYSERR_INVALFLAG, "An invalid flag was passed to a system function."
+MMSYSERR_INVALPARAM, "An invalid parameter was passed to a system function."
+
+/* WAVE errors */
+WAVERR_BADFORMAT, "The specified format is not supported or cannot be translated. Use the Capabilities function to determine the supported formats"
+WAVERR_STILLPLAYING, "Cannot perform this operation while media data is still playing. Reset the device, or wait until the data is finished playing."
+WAVERR_UNPREPARED, "The wave header was not prepared. Use the Prepare function to prepare the header, and then try again."
+WAVERR_SYNC, "Cannot open the device without using the WAVE_ALLOWSYNC flag. Use the flag, and then try again."
+
+/* MIDI errors */
+MIDIERR_UNPREPARED, "The MIDI header was not prepared. Use the Prepare function to prepare the header, and then try again."
+MIDIERR_STILLPLAYING, "Cannot perform this operation while media data is still playing. Reset the device, or wait until the data is finished playing."
+MIDIERR_NOMAP, "A MIDI map was not found. There may be a problem with the driver, or the MIDIMAP.CFG file may be corrupt or missing."
+MIDIERR_NOTREADY, "The port is transmitting data to the device. Wait until the data has been transmitted, and then try again."
+MIDIERR_NODEVICE, "The current MIDI Mapper setup refers to a MIDI device that is not installed on the system. Use MIDI Mapper to edit the setup."
+MIDIERR_INVALIDSETUP, "The current MIDI setup is damaged. Copy the original MIDIMAP.CFG file to the Windows SYSTEM directory, and then try again."
+
+/* MCI errors */
+MCIERR_INVALID_DEVICE_ID, "Invalid MCI device ID. Use the ID returned when opening the MCI device."
+MCIERR_UNRECOGNIZED_KEYWORD, "The driver cannot recognize the specified command parameter."
+MCIERR_UNRECOGNIZED_COMMAND, "The driver cannot recognize the specified command."
+MCIERR_HARDWARE, "There is a problem with your media device. Make sure it is working correctly or contact the device manufacturer."
+MCIERR_INVALID_DEVICE_NAME, "The specified device is not open or is not recognized by MCI."
+MCIERR_OUT_OF_MEMORY, "Not enough memory available for this task.\nQuit one or more applications to increase available memory, and then try again."
+MCIERR_DEVICE_OPEN, "The device name is already being used as an alias by this application. Use a unique alias."
+MCIERR_CANNOT_LOAD_DRIVER, "There is an undetectable problem in loading the specified device driver."
+MCIERR_MISSING_COMMAND_STRING, "No command was specified."
+MCIERR_PARAM_OVERFLOW, "The output string was too large to fit in the return buffer. Increase the size of the buffer."
+MCIERR_MISSING_STRING_ARGUMENT, "The specified command requires a character-string parameter. Please provide one."
+MCIERR_BAD_INTEGER, "The specified integer is invalid for this command."
+MCIERR_PARSER_INTERNAL, "The device driver returned an invalid return type. Check with the device manufacturer about obtaining a new driver."
+MCIERR_DRIVER_INTERNAL, "There is a problem with the device driver. Check with the device manufacturer about obtaining a new driver."
+MCIERR_MISSING_PARAMETER, "The specified command requires a parameter. Please supply one."
+MCIERR_UNSUPPORTED_FUNCTION, "The MCI device you are using does not support the specified command."
+MCIERR_FILE_NOT_FOUND, "Cannot find the specified file. Make sure the path and filename are correct."
+MCIERR_DEVICE_NOT_READY, "The device driver is not ready."
+MCIERR_INTERNAL, "A problem occurred in initializing MCI. Try restarting Windows."
+MCIERR_DRIVER, "There is a problem with the device driver. The driver has closed. Cannot access error."
+MCIERR_CANNOT_USE_ALL, "Cannot use 'all' as the device name with the specified command."
+MCIERR_MULTIPLE, "Errors occurred in more than one device. Specify each command and device separately to determine which devices caused the error"
+MCIERR_EXTENSION_NOT_FOUND, "Cannot determine the device type from the given filename extension."
+MCIERR_OUTOFRANGE, "The specified parameter is out of range for the specified command."
+MCIERR_FLAGS_NOT_COMPATIBLE, "The specified parameters cannot be used together."
+MCIERR_FILE_NOT_SAVED, "Cannot save the specified file. Make sure you have enough disk space or are still connected to the network."
+MCIERR_DEVICE_TYPE_REQUIRED, "Cannot find the specified device. Make sure it is installed or that the device name is spelled correctly."
+MCIERR_DEVICE_LOCKED, "The specified device is now being closed. Wait a few seconds, and then try again."
+MCIERR_DUPLICATE_ALIAS, "The specified alias is already being used in this application. Use a unique alias."
+MCIERR_BAD_CONSTANT, "The specified parameter is invalid for this command."
+MCIERR_MUST_USE_SHAREABLE, "The device driver is already in use. To share it, use the 'shareable' parameter with each 'open' command."
+MCIERR_MISSING_DEVICE_NAME, "The specified command requires an alias, file, driver, or device name. Please supply one."
+MCIERR_BAD_TIME_FORMAT, "The specified value for the time format is invalid. Refer to the MCI documentation for valid formats."
+MCIERR_NO_CLOSING_QUOTE, "A closing double-quotation mark is missing from the parameter value. Please supply one."
+MCIERR_DUPLICATE_FLAGS, "A parameter or value was specified twice. Only specify it once."
+MCIERR_INVALID_FILE, "The specified file cannot be played on the specified MCI device. The file may be corrupt, or not in the correct format."
+MCIERR_NULL_PARAMETER_BLOCK, "A null parameter block was passed to MCI."
+MCIERR_UNNAMED_RESOURCE, "Cannot save an unnamed file. Supply a filename."
+MCIERR_NEW_REQUIRES_ALIAS, "You must specify an alias when using the 'new' parameter."
+MCIERR_NOTIFY_ON_AUTO_OPEN, "Cannot use the 'notify' flag with auto-opened devices."
+MCIERR_NO_ELEMENT_ALLOWED, "Cannot use a filename with the specified device."
+MCIERR_NONAPPLICABLE_FUNCTION, "Cannot carry out the commands in the order specified. Correct the command sequence, and then try again."
+MCIERR_ILLEGAL_FOR_AUTO_OPEN, "Cannot carry out the specified command on an auto-opened device. Wait until the device is closed, and then try again."
+MCIERR_FILENAME_REQUIRED, "The filename is invalid. Make sure the filename is not longer than 8 characters, followed by a period and an extension."
+MCIERR_EXTRA_CHARACTERS, "Cannot specify extra characters after a string enclosed in quotation marks."
+MCIERR_DEVICE_NOT_INSTALLED, "The specified device is not installed on the system. Use the Drivers option in Control Panel to install the device."
+MCIERR_GET_CD, "Cannot access the specified file or MCI device. Try changing directories or restarting your computer."
+MCIERR_SET_CD, "Cannot access the specified file or MCI device because the application cannot change directories."
+MCIERR_SET_DRIVE, "Cannot access specified file or MCI device because the application cannot change drives."
+MCIERR_DEVICE_LENGTH, "Specify a device or driver name that is less than 79 characters."
+MCIERR_DEVICE_ORD_LENGTH, "Specify a device or driver name that is less than 69 characters."
+MCIERR_NO_INTEGER, "The specified command requires an integer parameter. Please provide one."
+MCIERR_WAVE_OUTPUTSINUSE, "All wave devices that can play files in the current format are in use. Wait until a wave device is free, and then try again."
+MCIERR_WAVE_SETOUTPUTINUSE, "Cannot set the current wave device for play back because it is in use. Wait until the device is free, and then try again."
+MCIERR_WAVE_INPUTSINUSE, "All wave devices that can record files in the current format are in use. Wait until a wave device is free, and then try again."
+MCIERR_WAVE_SETINPUTINUSE, "Cannot set the current wave device for recording because it is in use. Wait until the device is free, and then try again."
+MCIERR_WAVE_OUTPUTUNSPECIFIED, "Any compatible waveform playback device may be used."
+MCIERR_WAVE_INPUTUNSPECIFIED, "Any compatible waveform recording device may be used."
+MCIERR_WAVE_OUTPUTSUNSUITABLE, "No wave device that can play files in the current format is installed. Use the Drivers option to install the wave device."
+MCIERR_WAVE_SETOUTPUTUNSUITABLE,"The device you are trying to play to cannot recognize the current file format."
+MCIERR_WAVE_INPUTSUNSUITABLE, "No wave device that can record files in the current format is installed. Use the Drivers option to install the wave device."
+MCIERR_WAVE_SETINPUTUNSUITABLE, "The device you are trying to record from cannot recognize the current file format."
+MCIERR_NO_WINDOW, "There is no display window."
+MCIERR_CREATEWINDOW, "Could not create or use window."
+MCIERR_FILE_READ, "Cannot read the specified file. Make sure the file is still present, or check your disk or network connection."
+MCIERR_FILE_WRITE, "Cannot write to the specified file. Make sure you have enough disk space or are still connected to the network."
+MCIERR_SEQ_DIV_INCOMPATIBLE, "The time formats of the ""song pointer"" and SMPTE are mutually exclusive. You can't use them together."
+MCIERR_SEQ_NOMIDIPRESENT, "The system has no installed MIDI devices. Use the Drivers option from the Control Panel to install a MIDI driver."
+MCIERR_SEQ_PORT_INUSE, "The specified MIDI port is already in use. Wait until it is free; the try again."
+MCIERR_SEQ_PORT_MAPNODEVICE, "The current MIDI Mapper setup refers to a MIDI device that is not installed on the system. Use the MIDI Mapper option from the Control Panel to edit the setup."
+MCIERR_SEQ_PORT_MISCERROR, "An error occurred with the specified port."
+MCIERR_SEQ_PORT_NONEXISTENT, "The specified MIDI device is not installed on the system. Use the Drivers option from the Control Panel to install a MIDI device."
+MCIERR_SEQ_PORTUNSPECIFIED, "The system doesn't have a current MIDI port specified."
+MCIERR_SEQ_TIMER, "All multimedia timers are being used by other applications. Quit one of these applications; then, try again."
+
+END
--
1.7.0.4
--------------070202050407080602070205--
More information about the wine-patches
mailing list