[PATCH 4/6] d3d8/tests: Test mode restoration on focus loss.
Stefan Dösinger
stefan at codeweavers.com
Tue Nov 18 14:26:55 CST 2014
---
dlls/d3d8/tests/device.c | 112 ++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 105 insertions(+), 7 deletions(-)
diff --git a/dlls/d3d8/tests/device.c b/dlls/d3d8/tests/device.c
index 3b2d4ac..8dcd163 100644
--- a/dlls/d3d8/tests/device.c
+++ b/dlls/d3d8/tests/device.c
@@ -2237,7 +2237,13 @@ static void test_wndproc(void)
ULONG ref;
DWORD res, tid;
HWND tmp;
+ UINT i, adapter_mode_count;
HRESULT hr;
+ D3DDISPLAYMODE d3ddm;
+ DWORD d3d_width = 0, d3d_height = 0, user32_width = 0, user32_height = 0;
+ DEVMODEW devmode;
+ LONG change_ret;
+ BOOL ret;
static const struct message create_messages[] =
{
@@ -2258,6 +2264,9 @@ static void test_wndproc(void)
* not reliable on X11 WMs. When the window focus follows the
* mouse pointer the message is not sent.
* {WM_ACTIVATE, FOCUS_WINDOW, TRUE, WA_INACTIVE}, */
+ {WM_DISPLAYCHANGE, DEVICE_WINDOW, FALSE, 0},
+ /* WM_DISPLAYCHANGE is sent to the focus window too, but the order is
+ * not deterministic. */
{WM_WINDOWPOSCHANGING, DEVICE_WINDOW, FALSE, 0},
/* Windows sends WM_ACTIVATE to the device window, indicating that
* SW_SHOWMINIMIZED is used instead of SW_MINIMIZE. Yet afterwards
@@ -2277,6 +2286,57 @@ static void test_wndproc(void)
d3d8 = Direct3DCreate8(D3D_SDK_VERSION);
ok(!!d3d8, "Failed to create a D3D object.\n");
+ adapter_mode_count = IDirect3D8_GetAdapterModeCount(d3d8, D3DADAPTER_DEFAULT);
+ for (i = 0; i < adapter_mode_count; ++i)
+ {
+ hr = IDirect3D8_EnumAdapterModes(d3d8, D3DADAPTER_DEFAULT, i, &d3ddm);
+ ok(SUCCEEDED(hr), "Failed to enumerate display mode, hr %#x.\n", hr);
+
+ if (d3ddm.Format != D3DFMT_X8R8G8B8)
+ continue;
+ if (d3ddm.Width == registry_mode.dmPelsWidth && d3ddm.Height == registry_mode.dmPelsHeight)
+ continue;
+ /* The r200 driver on Windows XP enumerates modes like 320x200 and 320x240 but
+ * refuses to create a device at these sizes. */
+ if (d3ddm.Width < 640 || d3ddm.Height < 480)
+ continue;
+
+ if (!user32_width)
+ {
+ user32_width = d3ddm.Width;
+ user32_height = d3ddm.Height;
+ continue;
+ }
+
+ /* Make sure the d3d mode is smaller in width or height and at most
+ * equal in the other dimension than the mode passed to
+ * ChangeDisplaySettings. Otherwise Windows shrinks the window to
+ * the ChangeDisplaySettings parameters + 12. */
+ if (d3ddm.Width == user32_width && d3ddm.Height == user32_height)
+ continue;
+ if (d3ddm.Width <= user32_width && d3ddm.Height <= user32_height)
+ {
+ d3d_width = d3ddm.Width;
+ d3d_height = d3ddm.Height;
+ break;
+ }
+ if (user32_width <= d3ddm.Width && user32_height <= d3ddm.Height)
+ {
+ d3d_width = user32_width;
+ d3d_height = user32_height;
+ user32_width = d3ddm.Width;
+ user32_height = d3ddm.Height;
+ break;
+ }
+ }
+
+ if (!d3d_width)
+ {
+ skip("Could not find adequate modes, skipping mode tests.\n");
+ IDirect3D8_Release(d3d8);
+ return;
+ }
+
wc.lpfnWndProc = test_proc;
wc.lpszClassName = "d3d8_test_wndproc_wc";
ok(RegisterClassA(&wc), "Failed to register window class.\n");
@@ -2286,12 +2346,18 @@ static void test_wndproc(void)
thread_params.test_finished = CreateEventA(NULL, FALSE, FALSE, NULL);
ok(!!thread_params.test_finished, "CreateEvent failed, last error %#x.\n", GetLastError());
+ memset(&devmode, 0, sizeof(devmode));
+ devmode.dmSize = sizeof(devmode);
+ devmode.dmFields = DM_PELSWIDTH | DM_PELSHEIGHT;
+ devmode.dmPelsWidth = user32_width;
+ devmode.dmPelsHeight = user32_height;
+ change_ret = ChangeDisplaySettingsW(&devmode, CDS_FULLSCREEN);
+ ok(change_ret == DISP_CHANGE_SUCCESSFUL, "Failed to change display mode, ret %#x.\n", change_ret);
+
focus_window = CreateWindowA("d3d8_test_wndproc_wc", "d3d8_test",
- WS_MAXIMIZE | WS_VISIBLE | WS_CAPTION , 0, 0, registry_mode.dmPelsWidth,
- registry_mode.dmPelsHeight, 0, 0, 0, 0);
+ WS_MAXIMIZE | WS_VISIBLE | WS_CAPTION , 0, 0, user32_width, user32_height, 0, 0, 0, 0);
device_window = CreateWindowA("d3d8_test_wndproc_wc", "d3d8_test",
- WS_MAXIMIZE | WS_VISIBLE | WS_CAPTION , 0, 0, registry_mode.dmPelsWidth,
- registry_mode.dmPelsHeight, 0, 0, 0, 0);
+ WS_MAXIMIZE | WS_VISIBLE | WS_CAPTION , 0, 0, user32_width, user32_height, 0, 0, 0, 0);
thread = CreateThread(NULL, 0, wndproc_thread, &thread_params, 0, &tid);
ok(!!thread, "Failed to create thread, last error %#x.\n", GetLastError());
@@ -2324,8 +2390,8 @@ static void test_wndproc(void)
expect_messages = create_messages;
device_desc.device_window = device_window;
- device_desc.width = registry_mode.dmPelsWidth;
- device_desc.height = registry_mode.dmPelsHeight;
+ device_desc.width = d3d_width;
+ device_desc.height = d3d_height;
device_desc.flags = CREATE_DEVICE_FULLSCREEN;
if (!(device = create_device(d3d8, focus_window, &device_desc)))
{
@@ -2354,6 +2420,22 @@ static void test_wndproc(void)
proc = GetWindowLongPtrA(focus_window, GWLP_WNDPROC);
ok(proc != (LONG_PTR)test_proc, "Expected wndproc != %#lx.\n", (LONG_PTR)test_proc);
+ /* Change the mode while the device is in use and then drop focus. */
+ devmode.dmFields = DM_PELSWIDTH | DM_PELSHEIGHT;
+ devmode.dmPelsWidth = user32_width;
+ devmode.dmPelsHeight = user32_height;
+ change_ret = ChangeDisplaySettingsW(&devmode, CDS_FULLSCREEN);
+ ok(change_ret == DISP_CHANGE_SUCCESSFUL, "Failed to change display mode, ret %#x, i=%u.\n", change_ret, i);
+
+ /* Wine doesn't (yet) mark the device not reset when the mode is changed, thus the todo_wine.
+ * But sometimes focus-follows-mouse WMs also temporarily drop window focus, which makes
+ * mark the device lost, then not reset, causing the test to succeed for the wrong reason. */
+ hr = IDirect3DDevice8_TestCooperativeLevel(device);
+ if (hr == D3DERR_DEVICENOTRESET)
+ ok(hr == D3DERR_DEVICENOTRESET, "Got unexpected hr %#x.\n", hr);
+ else
+ todo_wine ok(hr == D3DERR_DEVICENOTRESET, "Got unexpected hr %#x.\n", hr);
+
expect_messages = focus_loss_messages;
/* SetForegroundWindow is a poor replacement for the user pressing alt-tab or
* manually changing the focus. It generates the same messages, but the task
@@ -2361,7 +2443,7 @@ static void test_wndproc(void)
* an inactive titlebar if reactivated with SetForegroundWindow. Reactivating
* the device is difficult, see below. */
SetForegroundWindow(GetDesktopWindow());
- ok(!expect_messages->message, "Expected message %#x for window %#x, but didn't receive it.\n",
+ todo_wine ok(!expect_messages->message, "Expected message %#x for window %#x, but didn't receive it.\n",
expect_messages->message, expect_messages->window);
expect_messages = NULL;
tmp = GetFocus();
@@ -2378,6 +2460,12 @@ static void test_wndproc(void)
else
ok(hr == D3DERR_DEVICELOST, "Got unexpected hr %#x.\n", hr);
+ ret = EnumDisplaySettingsW(NULL, ENUM_CURRENT_SETTINGS, &devmode);
+ ok(ret, "Failed to get display mode.\n");
+ todo_wine ok(devmode.dmPelsWidth == registry_mode.dmPelsWidth
+ && devmode.dmPelsHeight == registry_mode.dmPelsHeight, "Got unexpect screen size %ux%u.\n",
+ devmode.dmPelsWidth, devmode.dmPelsHeight);
+
/* I have to minimize and restore the focus window, otherwise native d3d9 fails
* device::reset with D3DERR_DEVICELOST. This does not happen when the window
* restore is triggered by the user. */
@@ -2392,6 +2480,12 @@ static void test_wndproc(void)
hr = IDirect3DDevice8_TestCooperativeLevel(device);
ok(hr == D3DERR_DEVICENOTRESET, "Got unexpected hr %#x.\n", hr);
+ ret = EnumDisplaySettingsW(NULL, ENUM_CURRENT_SETTINGS, &devmode);
+ ok(ret, "Failed to get display mode.\n");
+ todo_wine ok(devmode.dmPelsWidth == registry_mode.dmPelsWidth
+ && devmode.dmPelsHeight == registry_mode.dmPelsHeight, "Got unexpect screen size %ux%u.\n",
+ devmode.dmPelsWidth, devmode.dmPelsHeight);
+
/* Releasing a device in lost state breaks follow-up tests on native. */
hr = reset_device(device, &device_desc);
ok(SUCCEEDED(hr), "Failed to reset device, hr %#x.\n", hr);
@@ -2400,6 +2494,10 @@ static void test_wndproc(void)
ref = IDirect3DDevice8_Release(device);
ok(ref == 0, "The device was not properly freed: refcount %u.\n", ref);
+ /* Fix up the mode until Wine's device release behavior is fixed. */
+ change_ret = ChangeDisplaySettingsW(NULL, CDS_FULLSCREEN);
+ ok(change_ret == DISP_CHANGE_SUCCESSFUL, "Failed to change display mode, ret %#x.\n", change_ret);
+
proc = GetWindowLongPtrA(focus_window, GWLP_WNDPROC);
ok(proc == (LONG_PTR)test_proc, "Expected wndproc %#lx, got %#lx.\n",
(LONG_PTR)test_proc, proc);
--
2.0.4
More information about the wine-patches
mailing list