No subject

[Drive A]
"Path" = "/mnt/floppy"
"Type" = "floppy"
"Label" = "Floppy"
"Serial" = "87654321"
"Device" = "/dev/fd0"

I'm not sure whether /mnt/floppy should be mounted or not when trying
to do this. I tried it both ways and got the same error message from
rdisk.exe:

"Repair Disk Utlity is unable to get configuration information for the
floppy drive"

and this spew of stuff in the controlling xterm:

fixme:ntdll:RtlDosPathNameToNtPathName_U
(L"A:\\",0x406160ac,00000000,00000000)
fixme:ntdll:NtOpenFile
(0x406160f0,0x00100003,0x406151cc,0x406151e4,0x00000003,0x00000010)
stub
fixme:ntdll:NtQueryInformationFile
(0x00000000,0x406151e4,0x406151ec,0x00000004,0x00000011),stub!
fixme:ntdll:NtFsControlFile
(0x00000000,0x00000000,(nil),(nil),0x406151e4,0x00090083,(nil),0x00000000,(nil),0x00000000):
stub
fixme:ntdll:NtDeviceIoControlFile
(0x00000000,0x00000000,(nil),(nil),0x4061607c,0x00070000,(nil),0x00000000,0x4061604c,0x00000018):
empty stub
fixme:ntdll:NtDeviceIoControlFile
(0x00000000,0x00000000,(nil),(nil),0x4061607c,0x00070c00,(nil),0x00000000,0x40615e4c,0x000001e0):
empty stub


I'm using Google Groups to post this and am pretty rusty on usenet, so
if you could email me a copy of your response that would make my life
easier! Thanks very much for your time, whoever reads this.
--Jim Morash
jmorash at mit.edu