[Wine] World Of Warcraft on FreeBSD 6.2

Sam Fourman Jr. sfourman at gmail.com
Tue Apr 3 15:29:32 CDT 2007

at the bottom of my E-mail is a full dmesg

does anyone know if there is any special settings in the nvidia video
card driver that need to be set to anything other than the default way
they are installed from the ports tree on FreeBSD 6.2, using the
1.0.9746 Nvidia Driver, specificly for Playing WoW under wine (I am
playing WoW Burning Crusade) .

When I start WoW.exe (in opengl mode) I can see my desktop still and I
can hear the sound from the WoW startup screen, but I can never
actually see the screen

then I have to reboot my machine because the WoW sound keeps
playing(Even after I exit xorg)

I am using 1400x900 resolution if that means anything

My wtf file settings are the following

SET locale "enUS"
SET gxApi "opengl"
SET hwDetect "0"
SET gxColorBits "24"
SET gxDepthBits "24"
SET gxResolution "1440x900"
SET gxMultisample "8"
SET gxMultisampleQuality "0.000000"
SET gxFixLag "0"
SET fullAlpha "1"
SET SmallCull "0.010000"
SET DistCull "500.000000"
SET trilinear "1"
SET frillDensity "48"
SET farclip "717"
SET ffxDeath "0"
SET ffxGlow  "0"
SET SoundOutputSystem "1"
SET SoundBufferSize "150"
SET specular "1"
SET pixelShaders "1"
SET particleDensity "1.000000"
SET unitDrawDist "300.000000"
SET accountName "dfourman"
SET movie "0"
SET expansionMovie "0"
SET Gamma "1.000000"
SET readTOS "1"
SET readEULA "1"
SET MusicVolume "0.60000002384186"
SET SoundVolume "1"
SET MasterVolume "1"
SET realmList "us.logon.worldofwarcraft.com"
SET realmName "Dragonblight"
SET gameTip "20"
SET CombatDamage "0"
SET AmbienceVolume "0.60000002384186"
SET minimapZoom "0"
SET minimapInsideZoom "0"
SET uiScale "1"
SET CombatLogRangeCreature "50"
SET lod "0"
SET shadowLevel "0"
SET anisotropic "16"
SET weatherDensity "3"
SET M2UsePixelShaders "1"
SET mouseSpeed "1"
SET cameraYawMoveSpeed "180"
SET cameraYawSmoothSpeed "180"
SET cameraDistanceMaxFactor "1"
SET AutoInteract "1"
SET UnitNameOwn "1"
SET UnitNameNPC "1"
SET autoSelfCast "1"
SET readScanning "-1"
SET readContest "-1"
SET lastCharacterIndex "3"
SET cameraView "4"
SET gxRefresh "60"
SET gxTripleBuffer "1"
SET ShowTargetCastbar "1"
SET ShowVKeyCastbar "1"
SET gxVSync "0"

I have a Asus Striker Extreme Motherboard and an XFX Nvidia 8800 GTS Video card

I am using the onboard sound card and using this Driver

My network interfaces are using a driver I compiled from here

below is a dmesg from my system

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE-200703 #0: Tue Mar 20 23:57:59 CDT 2007
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz (2138.26-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 2146369536 (2046 MB)
avail memory = 2086842368 (1990 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia ASUSACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pci0: <memory, RAM> at device 1.0 (no driver attached)
pci0: <memory, RAM> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <memory, RAM> at device 1.3 (no driver attached)
pci0: <memory, RAM> at device 1.4 (no driver attached)
pci0: <memory, RAM> at device 1.5 (no driver attached)
pci0: <memory, RAM> at device 1.6 (no driver attached)
pci0: <memory, RAM> at device 2.0 (no driver attached)
pci0: <memory, RAM> at device 2.1 (no driver attached)
pci0: <memory, RAM> at device 2.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 8800 GTS> port 0xdf00-0xdf7f mem
0xec000000-0xecffffff,0xd0000000-0xdfffffff,0xea000000-0xebffffff irq
16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <memory, RAM> at device 10.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xeffff000-0xefffffff irq
21 at device 11.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xefffe000-0xefffe0ff
irq 22 at device 11.1 on pci0
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 13.0 on
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP55 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf700-0xf70f mem
0xefffd000-0xefffdfff irq 23 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce MCP55 SATA300 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xf200-0xf20f mem
0xefffc000-0xefffcfff irq 20 at device 14.1 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
atapci3: <nVidia nForce MCP55 SATA300 controller> port
mem 0xefffb000-0xefffbfff irq 21 at device 14.2 on pci0
ata6: <ATA channel 0> on atapci3
ata7: <ATA channel 1> on atapci3
pcib2: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci2: <ACPI PCI bus> on pcib2
fwohci0: <VIA Fire II (VT6306)> port 0xcf00-0xcf7f mem
0xefdff000-0xefdff7ff irq 19 at device 11.0 on pci2
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:01:1e:3d:ab
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:1e:3d:ab
fwe0: Ethernet address: 02:11:d8:1e:3d:ab
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pcm0: <NVidia MCP55 High Definition Audio Controller> mem
0xefff0000-0xefff3fff irq 22 at device 15.1 on pci0
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xec00-0xec07 mem
0xefffa000-0xefffafff,0xefff9000-0xefff90ff,0xefff8000-0xefff800f irq
23 at device 17.0 on pci0
nfe0: Ethernet address: 00:1a:92:46:e0:44
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: [FAST]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xeb00-0xeb07 mem
0xefff7000-0xefff7fff,0xefff6000-0xefff60ff,0xefff5000-0xefff500f irq
20 at device 18.0 on pci0
nfe1: Ethernet address: 00:1a:92:46:ed:f7
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1116 Gigabit PHY> on miibus1
e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe1: [FAST]
pcib3: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 20.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <mass storage> at device 0.0 (no driver attached)
pcib7: <ACPI PCI-PCI bridge> at device 23.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 24.0 on pci0
pci8: <ACPI PCI bus> on pcib8
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/21.00, addr 2, iclass 3/1
ums0: 8 buttons and Z dir.
uhub2: Logitech Logitech G15 Keyboard, class 9/0, rev 1.10/1.03, addr 3
uhub2: 4 ports with 2 removable, bus powered
ukbd0: Logitech Logitech Gaming Keyboard, rev 2.00/1.70, addr 4, iclass 3/1
kbd2 at ukbd0
uhid0: Logitech Logitech Gaming Keyboard, rev 2.00/1.70, addr 4, iclass 3/1
uhid1: G15 Keyboard G15 Keyboard, rev 2.00/1.03, addr 5, iclass 3/0
Timecounters tick every 1.000 msec
acd0: DVDR <SONY DVD RW AW-Q170A/1.70> at ata0-master UDMA66
acd1: CDRW <SONY CD-RW CRX230EE/2YS8> at ata0-slave UDMA33
ad4: 152627MB <WDC WD1600JS-00NCB1 10.02E02> at ata2-master SATA300
ad6: 152627MB <WDC WD1600JS-00NCB1 10.02E02> at ata3-master SATA300
ad8: 152627MB <WDC WD1600JS-00NCB1 10.02E02> at ata4-master SATA300
pcm0: <HDA Codec: Analog Device (Unknown)>
pcm0: <HDA Driver Revision: 20070320_0043>
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
nfe0: link state changed to UP

if there are any tips anyone could give me that would be Great

and if anyone needs more information from he I would be happy to get it

On 4/2/07, Nick Law <nlaw at nildram.co.uk> wrote:
> Declan Moriarty wrote:
> > On Sat, 2007-03-31 at 15:51 -0500, Sam Fourman Jr. wrote:
> >
> >> Has anyone been able to get World of Warcraft Burning crusade running
> >> on FreeBSD 6.2 stable with wine 0.9.34 and a nvidia video driver?
> >>
> >> I had it working on a earlier version of wine 9.22(I think it was)
> >>
> >> if someone would mind posting some instructions on how to get this
> >> working it would be great
> >>
> >>
> > If you posted your errors, we could have a laugh at you and perhaps
> > suggest something :-). WoW seems to work under wine, to judge by threads
> > around
> >
> Hi Sam,
> I think you asked for that. When posting you should always give as
> much relevant information as possible, otherwise nobody will bother
> responding.
> Cheers
> Nick
> _______________________________________________
> wine-users mailing list
> wine-users at winehq.org
> http://www.winehq.org/mailman/listinfo/wine-users

More information about the wine-users mailing list