[Wine] Running Prognos 5 in WINE

[L. Rahyen]

	You need to create a symbolic link from COM device to TTY like this:

ln -s /dev/ttyUSB0 ~/.wine/dosdevices/com2

	This will create the symbolic link from COM2 to ttyUSB0.

On Sunday July 29 2007 17:02, Briareos wrote:
> Am Sonntag, 29. Juli 2007 16:58 schrieb Warren Dumortier:
> > Without any logs iit is difficult to help you :p
>
> Here come some logs :)
>
> I've now done a link from tty9 to ttyUSB0. For your info here is the
> dmesg-output from connecting the USB-cable (it's short so i provide it
> inline):
>
> [17205091.904000] usb 1-1: new full speed USB device using uhci_hcd and
> address 3
> [17205092.048000] cp2101 1-1:1.0: cp2101 converter detected
> [17205092.160000] usb 1-1: reset full speed USB device using uhci_hcd and
> address 3
> [17205092.296000] usb 1-1: cp2101 converter now attached to ttyUSB0
>
>
> I told the program to look only at COM9 for the device, but when it tries
> to connect I get an error dialog:
> "SetCommState function failed (win error code: 21)"
>
> In the console there is this:
> fixme:comm:set_queue_size insize 1024 outsize 1024 unimplemented stub
> err:comm:set_baud_rate tcgetattr error 'Input/output error'
>
>
> Maybe these infos help progressing. As I said in the last message, I don't
> know if the handling can or can't function (seeing it from
> protocol-/hardwareside) if I just do a symlink to a different DEV-file
> (COM->USB) ...
>
> _______________________________________________
> wine-users mailing list
> wine-users at winehq.org
> http://www.winehq.org/mailman/listinfo/wine-users