With GitLab and the spinning off of commit messages to wine-gitlab I
think the traffic estimates on the mailing list page need to be
updated... at least for wine-devel: it no longer has 50 messages per
day.
https://www.winehq.org/forums
(unfortunately there is no unit on the little per mailing-list graph)
--
Francois Gouget <fgouget(a)free.fr> http://fgouget.free.fr/
Theory is where you know everything but nothing works.
Practice is where everything works but nobody knows why.
Sometimes they go hand in hand: nothing works and nobody knows why.
This patch series introduces a new char misc driver, /dev/ntsync, which is used
to implement Windows NT synchronization primitives.
== Background ==
The Wine project emulates the Windows API in user space. One particular part of
that API, namely the NT synchronization primitives, have historically been
implemented via RPC to a dedicated "kernel" process. However, more recent
applications use these APIs more strenuously, and the overhead of RPC has become
a bottleneck.
The NT synchronization APIs are too complex to implement on top of existing
primitives without sacrificing correctness. Certain operations, such as
NtPulseEvent() or the "wait-for-all" mode of NtWaitForMultipleObjects(), require
direct control over the underlying wait queue, and implementing a wait queue
sufficiently robust for Wine in user space is not possible. This proposed
driver, therefore, implements the problematic interfaces directly in the Linux
kernel.
This driver was presented at Linux Plumbers Conference 2023. For those further
interested in the history of synchronization in Wine and past attempts to solve
this problem in user space, a recording of the presentation can be viewed here:
https://www.youtube.com/watch?v=NjU4nyWyhU8
== Performance ==
The gain in performance varies wildly depending on the application in question
and the user's hardware. For some games NT synchronization is not a bottleneck
and no change can be observed, but for others frame rate improvements of 50 to
150 percent are not atypical. The following table lists frame rate measurements
from a variety of games on a variety of hardware, taken by users Dmitry
Skvortsov, FuzzyQuils, OnMars, and myself:
Game Upstream ntsync improvement
===========================================================================
Anger Foot 69 99 43%
Call of Juarez 99.8 224.1 125%
Dirt 3 110.6 860.7 678%
Forza Horizon 5 108 160 48%
Lara Croft: Temple of Osiris 141 326 131%
Metro 2033 164.4 199.2 21%
Resident Evil 2 26 77 196%
The Crew 26 51 96%
Tiny Tina's Wonderlands 130 360 177%
Total War Saga: Troy 109 146 34%
===========================================================================
== Patches ==
The intended semantics of the patches are broadly intended to match those of the
corresponding Windows functions. For those not already familiar with the Windows
functions (or their undocumented behaviour), patch 31/31 provides a detailed
specification, and individual patches also include a brief description of the
API they are implementing.
The patches making use of this driver in Wine can be retrieved or browsed here:
https://repo.or.cz/wine/zf.git/shortlog/refs/heads/ntsync5
== Implementation ==
Some aspects of the implementation may deserve particular comment:
* In the interest of performance, each object is governed only by a single
spinlock. However, NTSYNC_IOC_WAIT_ALL requires that the state of multiple
objects be changed as a single atomic operation. In order to achieve this, we
first take a device-wide lock ("wait_all_lock") any time we are going to lock
more than one object at a time.
The maximum number of objects that can be used in a vectored wait, and
therefore the maximum that can be locked simultaneously, is 64. This number is
NT's own limit.
The acquisition of multiple spinlocks will degrade performance. This is a
conscious choice, however. Wait-for-all is known to be a very rare operation
in practice, especially with counts that approach the maximum, and it is the
intent of the ntsync driver to optimize wait-for-any at the expense of
wait-for-all as much as possible.
* NT mutexes are tied to their threads on an OS level, and the kernel includes
builtin support for "robust" mutexes. In order to keep the ntsync driver
self-contained and avoid touching more code than necessary, it does not hook
into task exit nor use pids.
Instead, the user space emulator is expected to manage thread IDs and pass
them as an argument to any relevant functions; this is the "owner" field of
ntsync_wait_args and ntsync_mutex_args.
When the emulator detects that a thread dies, it should therefore call
NTSYNC_IOC_MUTEX_KILL on any open mutexes.
* ntsync is module-capable mostly because there was nothing preventing it, and
because it aided development. It is not a hard requirement, though.
== Previous versions ==
Changes from v2:
* Check the result of fget() for NULL.
* Squash patch 31 (introducing the NTSYNC_WAIT_REALTIME flag) into patch 4, per
Arnd Bergmann.
* Use atomic_try_cmpxchg() instead of atomic_cmpxchg(), per off-list review from
Uros Bizjak.
* Link to v2: https://lore.kernel.org/lkml/[email protected]/
* Link to v1: https://lore.kernel.org/lkml/[email protected]/
* Link to RFC v2: https://lore.kernel.org/lkml/[email protected]/
* Link to RFC v1: https://lore.kernel.org/lkml/[email protected]/
Elizabeth Figura (30):
ntsync: Introduce the ntsync driver and character device.
ntsync: Introduce NTSYNC_IOC_CREATE_SEM.
ntsync: Introduce NTSYNC_IOC_SEM_POST.
ntsync: Introduce NTSYNC_IOC_WAIT_ANY.
ntsync: Introduce NTSYNC_IOC_WAIT_ALL.
ntsync: Introduce NTSYNC_IOC_CREATE_MUTEX.
ntsync: Introduce NTSYNC_IOC_MUTEX_UNLOCK.
ntsync: Introduce NTSYNC_IOC_MUTEX_KILL.
ntsync: Introduce NTSYNC_IOC_CREATE_EVENT.
ntsync: Introduce NTSYNC_IOC_EVENT_SET.
ntsync: Introduce NTSYNC_IOC_EVENT_RESET.
ntsync: Introduce NTSYNC_IOC_EVENT_PULSE.
ntsync: Introduce NTSYNC_IOC_SEM_READ.
ntsync: Introduce NTSYNC_IOC_MUTEX_READ.
ntsync: Introduce NTSYNC_IOC_EVENT_READ.
ntsync: Introduce alertable waits.
selftests: ntsync: Add some tests for semaphore state.
selftests: ntsync: Add some tests for mutex state.
selftests: ntsync: Add some tests for NTSYNC_IOC_WAIT_ANY.
selftests: ntsync: Add some tests for NTSYNC_IOC_WAIT_ALL.
selftests: ntsync: Add some tests for wakeup signaling with
WINESYNC_IOC_WAIT_ANY.
selftests: ntsync: Add some tests for wakeup signaling with
WINESYNC_IOC_WAIT_ALL.
selftests: ntsync: Add some tests for manual-reset event state.
selftests: ntsync: Add some tests for auto-reset event state.
selftests: ntsync: Add some tests for wakeup signaling with events.
selftests: ntsync: Add tests for alertable waits.
selftests: ntsync: Add some tests for wakeup signaling via alerts.
selftests: ntsync: Add a stress test for contended waits.
maintainers: Add an entry for ntsync.
docs: ntsync: Add documentation for the ntsync uAPI.
Documentation/userspace-api/index.rst | 1 +
.../userspace-api/ioctl/ioctl-number.rst | 2 +
Documentation/userspace-api/ntsync.rst | 399 +++++
MAINTAINERS | 9 +
drivers/misc/Kconfig | 11 +
drivers/misc/Makefile | 1 +
drivers/misc/ntsync.c | 1166 ++++++++++++++
include/uapi/linux/ntsync.h | 62 +
tools/testing/selftests/Makefile | 1 +
.../testing/selftests/drivers/ntsync/Makefile | 8 +
tools/testing/selftests/drivers/ntsync/config | 1 +
.../testing/selftests/drivers/ntsync/ntsync.c | 1407 +++++++++++++++++
12 files changed, 3068 insertions(+)
create mode 100644 Documentation/userspace-api/ntsync.rst
create mode 100644 drivers/misc/ntsync.c
create mode 100644 include/uapi/linux/ntsync.h
create mode 100644 tools/testing/selftests/drivers/ntsync/Makefile
create mode 100644 tools/testing/selftests/drivers/ntsync/config
create mode 100644 tools/testing/selftests/drivers/ntsync/ntsync.c
base-commit: 4cece764965020c22cff7665b18a012006359095
--
2.43.0
Hello,
I am subscribed to receive mail from the list wine(a)gitlab.winehq.org
However, I notice this morning that all mail from last night's merger are
missing.
Did the list fail or something I don't understand?
Regards
David.
Binary packages for various distributions will be available from:
https://www.winehq.org/download
Summary since last release
* Rebased to current wine 9.5 (435 patches are applied to wine vanilla)
Upstreamed (Either directly from staging or fixed with a similar patch).
* shell32: Append .exe when registry lookup fails first time.
* wined3d: Use bindless textures for GLSL shaders.
* kernel32/tests: Add tests for job object accounting.
* shell32: Fix SHFileOperation(FO_MOVE) for creating subdirectories.
* user32: Added LoadKeyboardLayoutEx stub.
Removed (No longer required).
* ws2_32-TransmitFile
* ntdll-Threading
Added:
* None.
Updated:
* vkd3d-latest
NOTE:
widl-SLTG_Typelib_Support has been disabled due and is currently being upstreamed.
Where can you help
* Run Steam/Battle.net/GOG/UPlay/Epic
* Test your favorite game.
* Test your favorite applications.
* Improve staging patches and get them accepted upstream.
* Suggest patches to be included in staging.
As always, if you find a bug, please report it via
https://bugs.winehq.org
Best Regards
Alistair.
This patch series introduces a new char misc driver, /dev/ntsync, which is used
to implement Windows NT synchronization primitives.
This was previously submitted as an RFC [1]. Since there were no major changes
requested to the last RFC revision, I've stripped the RFC prefix.
[1] https://lore.kernel.org/lkml/[email protected]/
== Background ==
The Wine project emulates the Windows API in user space. One particular part of
that API, namely the NT synchronization primitives, have historically been
implemented via RPC to a dedicated "kernel" process. However, more recent
applications use these APIs more strenuously, and the overhead of RPC has become
a bottleneck.
The NT synchronization APIs are too complex to implement on top of existing
primitives without sacrificing correctness. Certain operations, such as
NtPulseEvent() or the "wait-for-all" mode of NtWaitForMultipleObjects(), require
direct control over the underlying wait queue, and implementing a wait queue
sufficiently robust for Wine in user space is not possible. This proposed
driver, therefore, implements the problematic interfaces directly in the Linux
kernel.
This driver was presented at Linux Plumbers Conference 2023. For those further
interested in the history of synchronization in Wine and past attempts to solve
this problem in user space, a recording of the presentation can be viewed here:
https://www.youtube.com/watch?v=NjU4nyWyhU8
== Performance ==
The gain in performance varies wildly depending on the application in question
and the user's hardware. For some games NT synchronization is not a bottleneck
and no change can be observed, but for others frame rate improvements of 50 to
150 percent are not atypical. The following table lists frame rate measurements
from a variety of games on a variety of hardware, taken by users Dmitry
Skvortsov, FuzzyQuils, OnMars, and myself:
Game Upstream ntsync improvement
===========================================================================
Anger Foot 69 99 43%
Call of Juarez 99.8 224.1 125%
Dirt 3 110.6 860.7 678%
Forza Horizon 5 108 160 48%
Lara Croft: Temple of Osiris 141 326 131%
Metro 2033 164.4 199.2 21%
Resident Evil 2 26 77 196%
The Crew 26 51 96%
Tiny Tina's Wonderlands 130 360 177%
Total War Saga: Troy 109 146 34%
===========================================================================
== Patches ==
The intended semantics of the patches are broadly intended to match those of the
corresponding Windows functions. For those not already familiar with the Windows
functions (or their undocumented behaviour), patch 31/31 provides a detailed
specification, and individual patches also include a brief description of the
API they are implementing.
The patches making use of this driver in Wine can be retrieved or browsed here:
https://repo.or.cz/wine/zf.git/shortlog/refs/heads/ntsync5
== Implementation ==
Some aspects of the implementation may deserve particular comment:
* In the interest of performance, each object is governed only by a single
spinlock. However, NTSYNC_IOC_WAIT_ALL requires that the state of multiple
objects be changed as a single atomic operation. In order to achieve this, we
first take a device-wide lock ("wait_all_lock") any time we are going to lock
more than one object at a time.
The maximum number of objects that can be used in a vectored wait, and
therefore the maximum that can be locked simultaneously, is 64. This number is
NT's own limit.
The acquisition of multiple spinlocks will degrade performance. This is a
conscious choice, however. Wait-for-all is known to be a very rare operation
in practice, especially with counts that approach the maximum, and it is the
intent of the ntsync driver to optimize wait-for-any at the expense of
wait-for-all as much as possible.
* NT mutexes are tied to their threads on an OS level, and the kernel includes
builtin support for "robust" mutexes. In order to keep the ntsync driver
self-contained and avoid touching more code than necessary, it does not hook
into task exit nor use pids.
Instead, the user space emulator is expected to manage thread IDs and pass
them as an argument to any relevant functions; this is the "owner" field of
ntsync_wait_args and ntsync_mutex_args.
When the emulator detects that a thread dies, it should therefore call
NTSYNC_IOC_MUTEX_KILL on any open mutexes.
* ntsync is module-capable mostly because there was nothing preventing it, and
because it aided development. It is not a hard requirement, though.
== Previous versions ==
Changes from v1:
* Fix a broken rebase that stole part of the Kconfig documentation from the
neighbouring entry, per Randy Dunlap.
* Add my email address to copyright and MODULE_AUTHOR lines, per Randy Dunlap.
* Document the reference counting behaviour more clearly, per Greg
Kroah-Hartman.
* Hopefully submit all the patches this time the right way.
* Link to v1: https://lore.kernel.org/lkml/[email protected]/
* Link to RFC v2: https://lore.kernel.org/lkml/[email protected]/
* Link to RFC v1: https://lore.kernel.org/lkml/[email protected]/
Elizabeth Figura (31):
ntsync: Introduce the ntsync driver and character device.
ntsync: Introduce NTSYNC_IOC_CREATE_SEM.
ntsync: Introduce NTSYNC_IOC_SEM_POST.
ntsync: Introduce NTSYNC_IOC_WAIT_ANY.
ntsync: Introduce NTSYNC_IOC_WAIT_ALL.
ntsync: Introduce NTSYNC_IOC_CREATE_MUTEX.
ntsync: Introduce NTSYNC_IOC_MUTEX_UNLOCK.
ntsync: Introduce NTSYNC_IOC_MUTEX_KILL.
ntsync: Introduce NTSYNC_IOC_CREATE_EVENT.
ntsync: Introduce NTSYNC_IOC_EVENT_SET.
ntsync: Introduce NTSYNC_IOC_EVENT_RESET.
ntsync: Introduce NTSYNC_IOC_EVENT_PULSE.
ntsync: Introduce NTSYNC_IOC_SEM_READ.
ntsync: Introduce NTSYNC_IOC_MUTEX_READ.
ntsync: Introduce NTSYNC_IOC_EVENT_READ.
ntsync: Introduce alertable waits.
ntsync: Allow waits to use the REALTIME clock.
selftests: ntsync: Add some tests for semaphore state.
selftests: ntsync: Add some tests for mutex state.
selftests: ntsync: Add some tests for NTSYNC_IOC_WAIT_ANY.
selftests: ntsync: Add some tests for NTSYNC_IOC_WAIT_ALL.
selftests: ntsync: Add some tests for wakeup signaling with
WINESYNC_IOC_WAIT_ANY.
selftests: ntsync: Add some tests for wakeup signaling with
WINESYNC_IOC_WAIT_ALL.
selftests: ntsync: Add some tests for manual-reset event state.
selftests: ntsync: Add some tests for auto-reset event state.
selftests: ntsync: Add some tests for wakeup signaling with events.
selftests: ntsync: Add tests for alertable waits.
selftests: ntsync: Add some tests for wakeup signaling via alerts.
selftests: ntsync: Add a stress test for contended waits.
maintainers: Add an entry for ntsync.
docs: ntsync: Add documentation for the ntsync uAPI.
Elizabeth Figura (31):
ntsync: Introduce the ntsync driver and character device.
ntsync: Introduce NTSYNC_IOC_CREATE_SEM.
ntsync: Introduce NTSYNC_IOC_SEM_POST.
ntsync: Introduce NTSYNC_IOC_WAIT_ANY.
ntsync: Introduce NTSYNC_IOC_WAIT_ALL.
ntsync: Introduce NTSYNC_IOC_CREATE_MUTEX.
ntsync: Introduce NTSYNC_IOC_MUTEX_UNLOCK.
ntsync: Introduce NTSYNC_IOC_MUTEX_KILL.
ntsync: Introduce NTSYNC_IOC_CREATE_EVENT.
ntsync: Introduce NTSYNC_IOC_EVENT_SET.
ntsync: Introduce NTSYNC_IOC_EVENT_RESET.
ntsync: Introduce NTSYNC_IOC_EVENT_PULSE.
ntsync: Introduce NTSYNC_IOC_SEM_READ.
ntsync: Introduce NTSYNC_IOC_MUTEX_READ.
ntsync: Introduce NTSYNC_IOC_EVENT_READ.
ntsync: Introduce alertable waits.
ntsync: Allow waits to use the REALTIME clock.
selftests: ntsync: Add some tests for semaphore state.
selftests: ntsync: Add some tests for mutex state.
selftests: ntsync: Add some tests for NTSYNC_IOC_WAIT_ANY.
selftests: ntsync: Add some tests for NTSYNC_IOC_WAIT_ALL.
selftests: ntsync: Add some tests for wakeup signaling with
WINESYNC_IOC_WAIT_ANY.
selftests: ntsync: Add some tests for wakeup signaling with
WINESYNC_IOC_WAIT_ALL.
selftests: ntsync: Add some tests for manual-reset event state.
selftests: ntsync: Add some tests for auto-reset event state.
selftests: ntsync: Add some tests for wakeup signaling with events.
selftests: ntsync: Add tests for alertable waits.
selftests: ntsync: Add some tests for wakeup signaling via alerts.
selftests: ntsync: Add a stress test for contended waits.
maintainers: Add an entry for ntsync.
docs: ntsync: Add documentation for the ntsync uAPI.
Documentation/userspace-api/index.rst | 1 +
.../userspace-api/ioctl/ioctl-number.rst | 2 +
Documentation/userspace-api/ntsync.rst | 399 +++++
MAINTAINERS | 9 +
drivers/misc/Kconfig | 11 +
drivers/misc/Makefile | 1 +
drivers/misc/ntsync.c | 1159 ++++++++++++++
include/uapi/linux/ntsync.h | 62 +
tools/testing/selftests/Makefile | 1 +
.../testing/selftests/drivers/ntsync/Makefile | 8 +
tools/testing/selftests/drivers/ntsync/config | 1 +
.../testing/selftests/drivers/ntsync/ntsync.c | 1407 +++++++++++++++++
12 files changed, 3061 insertions(+)
create mode 100644 Documentation/userspace-api/ntsync.rst
create mode 100644 drivers/misc/ntsync.c
create mode 100644 include/uapi/linux/ntsync.h
create mode 100644 tools/testing/selftests/drivers/ntsync/Makefile
create mode 100644 tools/testing/selftests/drivers/ntsync/config
create mode 100644 tools/testing/selftests/drivers/ntsync/ntsync.c
base-commit: 8d11c6d9b14f7a87f65529cb33edc5fed846ed9d
--
2.43.0
Binary packages for various distributions will be available from:
https://www.winehq.org/download
vkd3d has been updated to 1.11
For a full list of changes, please follow the link below.
https://gitlab.winehq.org/wine/vkd3d/-/releases/vkd3d-1.11
NOTE: Upstream Wine was updated to this version as well. We have continued
with keeping wine-staging to latest vkd3d.
Summary since last release
* Rebased to current wine 9.4 (462 patches are applied to wine vanilla)
Upstreamed (Either directly from staging or fixed with a similar patch).
* shell32: Implement NewMenu with new folder item.
* shell32: Implement insert/paste for item context menus.
* shell32: Recognize cut/copy/paste string verbs in item menu - context menu.
* shell32: Implement the "runas" verb.
* shell32: Add support for setting/getting PREFERREDDROPEFFECT in IDataObject.
* shell32: Add parameter to ISFHelper::DeleteItems to allow deleting files without confirmation.
* shell32: Remove source files when using cut in the context menu.
* wine.inf: Add 'New' context menu handler entry for directories.
* msi: Do not sign extend after multiplying.
* wine.inf: Set the EnableLUA value to 1.
* msi: Create the custom action server as an elevated process.
* ntdll: Implement process token elevation through manifests.
* ntdll: Always start the initial process through start.exe.
* ntdll: Elevate processes if requested in RtlCreateUserProcess().
* user32: Start explorer.exe using limited rights.
* programs/runas: Basic implementation for starting processes with a different trustlevel.
* server: Create processes using a limited administrator token by default.
* kernelbase: Elevate processes if requested in CreateProcessInternal().
Removed (No longer required).
* server-File_Permissions
* mscoree-CorValidateImage (Fixed uptream already).
Added:
* None.
Updated:
* vkd3d-latest
* kernel32-CopyFileEx
* ntdll-Junction_Points
* ntdll-WRITECOPY
* user32-rawinput-mouse
Where can you help
* Run Steam/Battle.net/GOG/UPlay/Epic
* Test your favorite game.
* Test your favorite applications.
* Improve staging patches and get them accepted upstream.
* Suggest patches to be included in staging.
As always, if you find a bug, please report it via
https://bugs.winehq.org
Best Regards
Alistair.
Hello,
I managed to prepare another round of patches for wine-staging (the
last one is actually a Wine patch though and it's a bit hacky too so
I'm not sure if it's a good solution)
Thanks
