wine-devel July 2009

116 participants
249 discussions

by Barry Bird

Good Afternoon. In section 3.3.6.2 of your User Guide you ask readers to report successes with databases other than MS SQL. Well here's one (I know Access 2000 can work with Wine, but this doesn't require Access): How to set up Wine to enable Windows programs that read and write to Jet (Access) databases using ODBC. I write such programs in C and use the API defined in ODBC API Reference http://msdn.microsoft.com/en-us/library/ms714562%28VS.85%29.aspx They work fine on Windows and only require Mingw to be installed to compile and link them, both for console programs and those using Windows SDK. You then can write interactive programs in C which use a full-featured SQL database which comes bundled with Windows. No need to purchase Access. With the set-up below they will also run on Linux (Kubuntu 9.04) and Wine 1.1.26. You need to update the registry to install the Access drivers. Under Windows, export from the Registry to *.reg files the registry entries - HKLM\Software\ODBC - HKLM\Software\Microsoft\Jet all subsidiary keys and values come with them. You can carefully edit these files to remove drivers and DSNs you don't need. Import these files using the registry editor in wine: wine regedit.exe. You need to bring across from Windows to Windows\System32 under wine: clbcatq.dll comres.dll expsrv.dll msjet40.dll mswstr10.dll msjter40.dll msjint40.dll msjtes40.dll msrd3x40.dll odbc32.dll odbccp32.dll odbcji32.dll odbcjt32.dll odbcad32.exe odbcint.dll odbctrac.dll vbajet32.dll Register this server in wine: wine regsvr32.exe msjtes40.dll No need to install MDAC. To use Windows ODBC drivers, you have to override Wine's odbccp32.dll and odbc32.dll with the native versions because the Wine versions are currently wired directly to Linux's unixodbc. This can be done by setting up the ODBC Data Source Administrator odbcad32.exe using winecfg: - Add the program to the Applications tab - then in the libraries tab, pick from 'New override for library' drop-down odbc32.dll and odbccp32.dll add them and edit them to be Native for Windows. Then if you do wine odbcad32.exe this brings up the ODBC Data Source Administrator window as in the Windows Control Panel If needed, set up (System) DSNs using this program. Bring across the programs and *.mdb database files from Windows. Using winecfg, you need to set up each program you want to run with overrides for odbc32.dll and odbccp32.dll (Applications and Libraries tabs) as above. The programs should then run as they did in Windows but perhaps a bit slower with: wine Odbc-prog.exe This has been tested twice on a clean .wine install. I cannot vouch for support of all API and SQL facilities however. I hope someone finds this useful. Barry Bird

5 years, 11 months

IMM / IME work

by Aric Stewart

Hello all, I know this will only interest a small portion of you but thought i would give a quick update on the state of IMM32 since I have brought it to a major milestone. All the main patches are in which now separate IMM32 and IMEs. There is still more work to do but the major framework is in place. X11 XIM processing should be unchanged. However wine can now begin to load native windows IMEs as well. I have tested with windows ATOK20 (a popular Japanese IME) and successfully had text processing in a fully IME aware application. There are still clear issues to resolve in many aspects of this processing but we have forward progress. ImmInstallIME does not work yet, nor does switching keyboards. So to get the native IME to work you need to add this registry key. [System\\CurrentControlSet\\Control\\Keyboard Layouts\\<keyboard layout>] "Ime File"=<IME filename> so for example for ATOK20 in Japanese i used. [System\\CurrentControlSet\\Control\\Keyboard Layouts\\e0010411] "Ime File"="ATOK20W.IME" I would love to hear how well things work. I am sure using native IMEs will quickly show us many places where IMM32 needs to be improved. One issues I am going to investigate next is that sometimes non x11drv ime initialization, if occurring too early, causes x11drv to fail to create windows. I have not investigated with the latest changes to xim.c (which may already correct this problem) but if you see this problem this patch may help and i believe the IME_UpdateAssociation(NULL) is already unneeded. diff --git a/dlls/winex11.drv/xim.c b/dlls/winex11.drv/xim.c index d4df9f7..0c98136 100644 --- a/dlls/winex11.drv/xim.c +++ b/dlls/winex11.drv/xim.c @@ -475,7 +475,6 @@ static void X11DRV_OpenIM(Display *display, XPointer ptr, XP XUnregisterIMInstantiateCallback(display, NULL, NULL, NULL, X11DRV_OpenIM, wine_tsx11_unlock(); IME_XIMPresent(TRUE); - IME_UpdateAssociation(NULL); } thanks, -aric

7 years, 10 months

Re: XInput [1/4]: Implement XInputGetState

by Stefan Dösinger

Am 09.07.2009 um 02:58 schrieb Michael Gruber: > This patch series implements parts of the XInput library. You can use > this to play games that support Xbox 360 Controllers. To be able to > use this you will need to have your Controller working on Linux via > the xpad kernel driver and the event interface. It will not work on > any OS other than Linux. It supports gamepads, should work with > guitars and wheels, but will not work with dance-mats. > <1-XInputGetState.patch> Is it possible to implement XInput on top of DirectInput? DirectInput already has some internal abstraction layers for differnet joystick APIs, and has basic support for OSX joysticks. Does DInput have enough capabilities to access all the Xbox controller's features? My gut says no, otherwise MS wouldn't have created a new lib. I guess its worth checking though.

8 years, 10 months

What happened to the Fedora packages?

by Neal Gompa

What happened to the Fedora packages? They have not been updated since 0.9.2!!!! Right now it is at 0.9.10!!! Nearly every other Linux distro supported has the up to date packages!!! And why does the Red Hat packages site not go to the SourceForge site as it does for SUSE packages and the others?? I have not really had the guts to ask until now, because I thought that maybe there was a slump, but now, its getting annoying!! And Fedora just released Fedora Core 5 yesterday!!! Please tell me new packages will be ready soon!!! Compiling WINE always crashes my computer, so I prefer to use the RPMs...

9 years, 9 months

winspool: ERROR_INVALID_NAME in GetDefaultPrinter() ?

by Detlef Riekenberg

Hi. >From which configuration does the "ERROR_INVALID_NAME" came from, when calling GetDefaultPrinter(NULL, &size) and no Printer is installed? This Test is Present in the current "dlls/winspool/tests/info.c". MSDN told us, that we receive an "ERROR_FILE_NOT_FOUND", if no Printer is installed: http://msdn.microsoft.com/library/en-us/gdi/prntspol_0hma.asp I get the "ERROR_FILE_NOT_FOUND" on win98se, winme, w2k and win2003 in this Situation. -- By By ... ... Detlef

10 years, 7 months

Wine runs IE7!

by Hans Leidekker

Well, sort of. I found bugs in shell32, rpcrt4, comctl32 and wininet that I had to implement, stub and override my way past before it would render a page, but finally, here's the obligatory screenshot. -Hans

13 years, 5 months

current state of full screen on MacOS?

by Joerg-Cyril.Hoehle＠t-systems.com

Hi, I'd like to know whether a MacOSX user can expect full screen modes to work, as I've heard only rumors and too little facts. My experience is this: + winecfg's window opens fine even with desktop set uo full screen, no window. E.g. as in the initial setting after rm -rf ~/.wine; wine winecfg. + Likewise, other programs opening windows work fine (regedit, notepad etc.). - Programs that offer a "select screen resolution" requester present a list whose largest vertical/Y resolution is 22 pixel less than what the monitor offers. I believe OSX reserves some place for its menu bar. Lower resolution entries, e.g. 1024x768 and 800x600, are listed normally. They work in desktop window mode. - Programs that want to make use of full screen fail or hang somehow. The issue may be two-fold: a) full screen does not work at all, or b) switching to full screen resolutions less than my LCD's native resolution does not work, and applications do not cope with that. E.g. many want to display a low-resolution intro video. - Approx. two monthes ago, a hybrid desktop mode was implemented in Wine: eliminate the desktop window when it matches the full screen size; recreate it when switching back to lower resolutions. I've not observed that effect either, but the idea is brilliant. I've heard that OSX would not switch to lower resolutions like Linux machines do with e.g. xrandr -s 1 or -s 2 etc. My LCD monitor can stretch low resolution VGA signals, e.g. when plugged to a Linux netbook. However the "early 2009" nVidia Macs do not produce analog video signals anymore, and I'm using the DVI-D output. What's the current state of Wine (and Darwine) w.r.t. full screen mode? Is it just my digital DVI + LCD setting or is there an issue with Wine? I've built Wine-1.1.24 with OSX 10.5.7 and XQuartz 2.3.3.2. Thank you, Jörg Höhle.

13 years, 6 months

Re: Use GCC's -Wlogical-op if possible

by Austin English

On Thu, Jun 18, 2009 at 12:32 PM, Gerald Pfeifer<gerald(a)pfeifer.com> wrote: > I verified this does not cause any extra warnings with GCC 4.4, whereas > GCC 4.5 will become quite a bit more useful in that regard and thus help > spot any issues. > > As with -Wtype-limits that I suggested last year, I pledge to keep close > an eye on this and to address any issues proactively as part of my nightly > test builds. > > Gerald > > ChangeLog: > Use GCC's -Wlogical-op if possible. > > diff --git a/configure.ac b/configure.ac > index bef311e..3f7a657 100644 > --- a/configure.ac > +++ b/configure.ac > @@ -1385,8 +1385,9 @@ then > WINE_TRY_CFLAGS([-fno-builtin],[AC_SUBST(BUILTINFLAG,"-fno-builtin")]) > WINE_TRY_CFLAGS([-fno-strict-aliasing]) > WINE_TRY_CFLAGS([-Wdeclaration-after-statement]) > - WINE_TRY_CFLAGS([-Wwrite-strings]) > + WINE_TRY_CFLAGS([-Wlogical-op]) > WINE_TRY_CFLAGS([-Wtype-limits]) > + WINE_TRY_CFLAGS([-Wwrite-strings]) > > dnl Check for noisy string.h > saved_CFLAGS="$CFLAGS" > > > Causes 106 more warnings on 4.3.3 of this sort: tab.c:693: warning: logical ‘&&’ with non-zero constant will always evaluate as true cert.c:1627: warning: logical ‘||’ with non-zero constant will always evaluate as true -- -Austin

13 years, 7 months

Re: tools/widl: Split expr_int_const off from expr

by Rob Shearman

2009/6/28 Gerald Pfeifer <gerald(a)pfeifer.com>: > diff --git a/tools/widl/parser.y b/tools/widl/parser.y > index c2f1abc..01aa060 100644 > --- a/tools/widl/parser.y > +++ b/tools/widl/parser.y > @@ -622,56 +633,54 @@ m_expr: { $$ = make_expr(EXPR_VOID); } > | expr > ; > > -expr: aNUM { $$ = make_exprl(EXPR_NUM, $1); } > - | aHEXNUM { $$ = make_exprl(EXPR_HEXNUM, $1); } > +expr: expr_int_const > | aDOUBLE { $$ = make_exprd(EXPR_DOUBLE, $1); } > + | '-' aDOUBLE { $$ = make_exprd(EXPR_DOUBLE, -($2)); } This is covered by the production for the binary minus operator that already exists, so I'm not sure what you're trying to achieve here. > | tFALSE { $$ = make_exprl(EXPR_TRUEFALSE, 0); } > - | tNULL { $$ = make_exprl(EXPR_NUM, 0); } > | tTRUE { $$ = make_exprl(EXPR_TRUEFALSE, 1); } > | aSTRING { $$ = make_exprs(EXPR_STRLIT, $1); } > | aWSTRING { $$ = make_exprs(EXPR_WSTRLIT, $1); } > - | aIDENTIFIER { $$ = make_exprs(EXPR_IDENTIFIER, $1); } > | expr '?' expr ':' expr { $$ = make_expr3(EXPR_COND, $1, $3, $5); } > | expr LOGICALOR expr { $$ = make_expr2(EXPR_LOGOR, $1, $3); } > | expr LOGICALAND expr { $$ = make_expr2(EXPR_LOGAND, $1, $3); } > - | expr '|' expr { $$ = make_expr2(EXPR_OR , $1, $3); } > - | expr '^' expr { $$ = make_expr2(EXPR_XOR, $1, $3); } > - | expr '&' expr { $$ = make_expr2(EXPR_AND, $1, $3); } > | expr EQUALITY expr { $$ = make_expr2(EXPR_EQUALITY, $1, $3); } > | expr INEQUALITY expr { $$ = make_expr2(EXPR_INEQUALITY, $1, $3); } > | expr '>' expr { $$ = make_expr2(EXPR_GTR, $1, $3); } > | expr '<' expr { $$ = make_expr2(EXPR_LESS, $1, $3); } > | expr GREATEREQUAL expr { $$ = make_expr2(EXPR_GTREQL, $1, $3); } > | expr LESSEQUAL expr { $$ = make_expr2(EXPR_LESSEQL, $1, $3); } > - | expr SHL expr { $$ = make_expr2(EXPR_SHL, $1, $3); } > - | expr SHR expr { $$ = make_expr2(EXPR_SHR, $1, $3); } > - | expr '+' expr { $$ = make_expr2(EXPR_ADD, $1, $3); } > - | expr '-' expr { $$ = make_expr2(EXPR_SUB, $1, $3); } > - | expr '%' expr { $$ = make_expr2(EXPR_MOD, $1, $3); } > - | expr '*' expr { $$ = make_expr2(EXPR_MUL, $1, $3); } > - | expr '/' expr { $$ = make_expr2(EXPR_DIV, $1, $3); } > | '!' expr { $$ = make_expr1(EXPR_LOGNOT, $2); } > - | '~' expr { $$ = make_expr1(EXPR_NOT, $2); } > - | '+' expr %prec POS { $$ = make_expr1(EXPR_POS, $2); } > - | '-' expr %prec NEG { $$ = make_expr1(EXPR_NEG, $2); } > | '&' expr %prec ADDRESSOF { $$ = make_expr1(EXPR_ADDRESSOF, $2); } > | '*' expr %prec PPTR { $$ = make_expr1(EXPR_PPTR, $2); } > | expr MEMBERPTR aIDENTIFIER { $$ = make_expr2(EXPR_MEMBER, make_expr1(EXPR_PPTR, $1), make_exprs(EXPR_IDENTIFIER, $3)); } > | expr '.' aIDENTIFIER { $$ = make_expr2(EXPR_MEMBER, $1, make_exprs(EXPR_IDENTIFIER, $3)); } > | '(' type ')' expr %prec CAST { $$ = make_exprt(EXPR_CAST, $2, $4); } > - | tSIZEOF '(' type ')' { $$ = make_exprt(EXPR_SIZEOF, $3, NULL); } > | expr '[' expr ']' { $$ = make_expr2(EXPR_ARRAY, $1, $3); } > - | '(' expr ')' { $$ = $2; } > ; > > expr_list_int_const: expr_int_const { $$ = append_expr( NULL, $1 ); } > | expr_list_int_const ',' expr_int_const { $$ = append_expr( $1, $3 ); } > ; > > -expr_int_const: expr { $$ = $1; > - if (!$$->is_const) > - error_loc("expression is not an integer constant\n"); > - } > +expr_int_const: aNUM { $$ = make_exprl(EXPR_NUM, $1); } > + | aHEXNUM { $$ = make_exprl(EXPR_HEXNUM, $1); } > + | tNULL { $$ = make_exprl(EXPR_NUM, 0); } > + | aIDENTIFIER { $$ = make_exprs(EXPR_IDENTIFIER, $1); } aIDENTIFIER isn't necessarily a constant expression. > + | '~' expr_int_const { $$ = make_expr1(EXPR_NOT, $2); } > + | '+' expr_int_const %prec POS { $$ = make_expr1(EXPR_POS, $2); } > + | '-' expr_int_const %prec NEG { $$ = make_expr1(EXPR_NEG, $2); } > + | expr_int_const SHL expr_int_const { $$ = make_expr2(EXPR_SHL, $1, $3); } > + | expr_int_const SHR expr_int_const { $$ = make_expr2(EXPR_SHR, $1, $3); } > + | expr_int_const '+' expr_int_const { $$ = make_expr2(EXPR_ADD, $1, $3); } > + | expr_int_const '-' expr_int_const { $$ = make_expr2(EXPR_SUB, $1, $3); } > + | expr_int_const '%' expr_int_const { $$ = make_expr2(EXPR_MOD, $1, $3); } > + | expr_int_const '*' expr_int_const { $$ = make_expr2(EXPR_MUL, $1, $3); } > + | expr_int_const '/' expr_int_const { $$ = make_expr2(EXPR_DIV, $1, $3); } > + | expr_int_const '|' expr_int_const { $$ = make_expr2(EXPR_OR , $1, $3); } > + | expr_int_const '^' expr_int_const { $$ = make_expr2(EXPR_XOR, $1, $3); } > + | expr_int_const '&' expr_int_const { $$ = make_expr2(EXPR_AND, $1, $3); } Using "expr_int_const" instead of "expr" here prevents a many forms of expressions from being parsed. > + | tSIZEOF '(' type ')' { $$ = make_exprt(EXPR_SIZEOF, $3, NULL); } > + | '(' expr ')' { $$ = $2; } > ; > > expr_const: expr { $$ = $1; It looks like you'll have to find another way of fixing the issue you are trying to fix. -- Rob Shearman

14 years, 4 months

meaning of "Hardware" field in bugzilla?

by Dan Kegel

Does "mac" mean "powerpc mac only"? I rather thought it meant "apple macintosh", regardless of cpu. I ask because Austin has just gone through and changed lots of "mac" bugs to "pc" even though the bugs were on Intel macs, which just seems wrong.

14 years, 4 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-devel July 2009