22 Dec
2003
22 Dec
'03
10:37 p.m.
Hello!
Here are the steps needed to setup a MinGW on a Red Hat Linux like rpm
based system (Fedora Core, Mandrake Linux, ... should probably work even
on a SuSE Linux)
* Download the mingw-binutils and mingw-gcc srpm's from
http://ftp.redhat.com/pub/contrib/libc6/SRPMS/
* Download the mingw-3.0-1.src.rpm srpm from
http://ftp.redhat.com/pub/contrib/libc6/noarch/SRPMS/
* Build the mingw and mingw-binutils rpm's (rpmbuild --rebuild
$SRPM) and install them.
* After the above step you can build the mingw-gcc rpm too. Install
it.
* That's almost everything: you need this patch for wine's configure
to make it find your mingw binaries.
* For instructions how to build the Wine tests for Windows see the
Wine Documentation.
You may want to try your local Red Hat mirror for the above srpm's.
This info can be found also on http://people.redhat.com/mstefani/wine/
Hope this helps
bye
michael
--
Michael Stefaniuc Tel.: +49-711-96437-199
System Administration Fax.: +49-711-96437-111
Red Hat GmbH Email: mstefani(a)redhat.com
Hauptstaetterstr. 58 http://www.redhat.de/
D-70178 Stuttgart
23 Dec
23 Dec
7:39 a.m.
Just a side note, if we are at the subject.
One can download the full package of "MinGW Developer Studio"
(http://www.parinya.ca)
It comes complete with a compiled tool chain. The Installer runs
flawlessly under wine. And so is the Dev-Studio and the compiler. (1:0)
for wine. The only thing that does not work is MinGW-gdb. One day I
intend to check this code out and fix this area on wine.
Michael Stefaniuc wrote:
Hello!
Here are the steps needed to setup a MinGW on a Red Hat Linux like rpm
based system (Fedora Core, Mandrake Linux, ... should probably work even
on a SuSE Linux)
* Download the mingw-binutils and mingw-gcc srpm's from
http://ftp.redhat.com/pub/contrib/libc6/SRPMS/
* Download the mingw-3.0-1.src.rpm srpm from
http://ftp.redhat.com/pub/contrib/libc6/noarch/SRPMS/
* Build the mingw and mingw-binutils rpm's (rpmbuild --rebuild
$SRPM) and install them.
* After the above step you can build the mingw-gcc rpm too. Install
it.
* That's almost everything: you need this patch for wine's configure
to make it find your mingw binaries.
* For instructions how to build the Wine tests for Windows see the
Wine Documentation.
You may want to try your local Red Hat mirror for the above srpm's.
This info can be found also on http://people.redhat.com/mstefani/wine/
Hope this helps
bye
michael
24 Dec
24 Dec
10:27 p.m.
Michael Stefaniuc <mstefani(a)redhat.de> writes:
Here are the steps needed to setup a MinGW on a Red
Hat Linux like rpm
based system (Fedora Core, Mandrake Linux, ... should probably work even
on a SuSE Linux)
And here are the steps needed to setup MinGW on Debian Woody (stable)
(hope I remember correctly and you have unstable in sources.list):
# apt-get install mingw32 mingw32-runtime/unstable
Feri. ;)
Merry Christmas!
5 Jan
5 Jan
3:05 p.m.
On December 22, 2003 05:37 pm, Michael Stefaniuc wrote:
* Build the mingw and mingw-binutils rpm's
(rpmbuild --rebuild
$SRPM) and install them.
mingw-binutils builds and installs no problem (I'm running RH9),
but mingw fails building at this stage, like so:
+ /usr/lib/rpm/find-debuginfo.sh /usr/src/redhat/BUILD/mingw-3.0
0 blocks
find: /var/tmp/mingw-3.0-1-buildroot/usr/lib/debug: No such file or directory
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip
+ /usr/lib/rpm/brp-strip-static-archive
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/stTpXuAW/dt.o: Invalid operation
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/stjCc8Q1/dt.o: Invalid operation
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/stGnVJ3r/gmon.o: Invalid operation
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/stbPILFr/_libm_dummy.o: Invalid
operation
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/sts3afYa/CRTglob.o: Invalid operation
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/st2KP6Vc/fwide.o: Invalid operation
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/st1n49AX/dt.o: Invalid operation
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/stZVDYaX/dt.o: Invalid operation
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/stKecJA5/dt.o: Invalid operation
...[more like these]...
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/stB4vLfp/dt.o: Invalid operation
error: Bad exit status from /var/tmp/rpm-tmp.47410 (%install)
RPM build errors:
user hpa does not exist - using root
group eng does not exist - using root
user hpa does not exist - using root
group eng does not exist - using root
user hpa does not exist - using root
group eng does not exist - using root
user hpa does not exist - using root
group eng does not exist - using root
user hpa does not exist - using root
group eng does not exist - using root
user hpa does not exist - using root
group eng does not exist - using root
Bad exit status from /var/tmp/rpm-tmp.47410 (%install)
Any idea what's going wrong?
--
Dimi.
3:33 p.m.
Hi!
Are you building the rpm's as root? I never do that.
On Mon, Jan 05, 2004 at 10:05:37AM -0500, Dimitrie O. Paun wrote:
On December 22, 2003 05:37 pm, Michael Stefaniuc
wrote:
I get this:
find: /scr/rpm/INSTALL/mingw-3.0-1-buildroot/usr/lib/debug: No such file
or directory
+ /usr/lib/rpm/redhat/brp-compress
+ /usr/lib/rpm/redhat/brp-strip /bin/true
+ /usr/lib/rpm/redhat/brp-strip-static-archive /bin/true
+ /usr/lib/rpm/redhat/brp-strip-comment-note /bin/true /usr/bin/objdump
Processing files: mingw-3.0-1
Do you have something in your .rpmmacros and/or .rpmrc that messes with
brp-strip? Cause the spec file has this:
# This keeps brp-strip from fucking up our nonnative binaries
%define __strip /bin/true
which works for me.
* Build the mingw and mingw-binutils
rpm's (rpmbuild --rebuild
$SRPM) and install them.
mingw-binutils builds and installs no problem (I'm running RH9),
but mingw fails building at this stage, like so:
+ /usr/lib/rpm/find-debuginfo.sh /usr/src/redhat/BUILD/mingw-3.0
0 blocks
find: /var/tmp/mingw-3.0-1-buildroot/usr/lib/debug: No such file or directory
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip
+ /usr/lib/rpm/brp-strip-static-archive strip:
/var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/stTpXuAW/dt.o: Invalid operation
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/stjCc8Q1/dt.o: Invalid operation
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/stGnVJ3r/gmon.o: Invalid operation
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/stbPILFr/_libm_dummy.o: Invalid
operation
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/sts3afYa/CRTglob.o: Invalid
operation
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/st2KP6Vc/fwide.o: Invalid operation
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/st1n49AX/dt.o: Invalid operation
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/stZVDYaX/dt.o: Invalid operation
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/stKecJA5/dt.o: Invalid operation
...[more like these]...
strip: /var/tmp/mingw-3.0-1-buildroot/usr/mingw/lib/stB4vLfp/dt.o: Invalid operation
error: Bad exit status from /var/tmp/rpm-tmp.47410 (%install)
This is the error.
RPM build errors:
user hpa does not exist - using root
group eng does not exist - using root
user hpa does not exist - using root
group eng does not exist - using root
user hpa does not exist - using root
group eng does not exist - using root
user hpa does not exist - using root
group eng does not exist - using root
user hpa does not exist - using root
group eng does not exist - using root
user hpa does not exist - using root
group eng does not exist - using root
This should be only warnings and they are
comming from the installation
of the srpm (check with rpm -ivh mingw-3.0-1.src.rpm) and are harmless.
Bad exit status from /var/tmp/rpm-tmp.47410
(%install)
bye
michael
--
Michael Stefaniuc Tel.: +49-711-96437-199
System Administration Fax.: +49-711-96437-111
Red Hat GmbH Email: mstefani(a)redhat.com
Hauptstaetterstr. 58 http://www.redhat.de/
D-70178 Stuttgart
3:56 p.m.
On January 5, 2004 10:33 am, Michael Stefaniuc wrote:
Hi!
Are you building the rpm's as root? I never do that.
Well, I don't do too much rpm building, and I haven't
changed permissions on /usr/src/redhat:
[dimi@dimi wine]$ rpmbuild --rebuild mingw-3.0-1.src.rpm
Installing mingw-3.0-1.src.rpm
error: cannot write to %sourcedir /usr/src/redhat/SOURCES
error: mingw-3.0-1.src.rpm cannot be installed
Do you have something in your .rpmmacros and/or .rpmrc
that messes with
brp-strip? Cause the spec file has this:
# This keeps brp-strip from fucking up our nonnative binaries
%define __strip /bin/true
which works for me.
I don't even have a .rpmmacros or .rpmrc file:
[root@dimi root]# ls /root/.rpm*
ls: /root/.rpm*: No such file or directory
[root@dimi root]# ls ~dimi/.rpm*
ls: /home/dimi/.rpm*: No such file or directory
It's a very standard RH9 installation, I don't usually change
stuff (I just hate configuring things :)).
--
Dimi.
7 Jan
7 Jan
5:51 p.m.
On Mon, Jan 05, 2004 at 10:56:20AM -0500, Dimitrie O. Paun wrote:
On January 5, 2004 10:33 am, Michael Stefaniuc wrote:
Here is my .rpmmacros file to be able to
build rpms as normal user. You
need to adapt the paths:
%_topdir /home/mstefani/rpm
%_tmppath /home/mstefani/rpm/INSTALL
You need also to setup the %_topdir directory. Do following as user you
want to build the rpms:
mkdir -p $_topdir $_tmppath
mkdir $_topdir/{BUILD,RPMS,SOURCES,SPECS,SRPMS}
mkdir $_topdir/RPMS/{i386,i486,i586,i686,noarch,athlon}
That should be all.
Are you building the rpm's as root? I never
do that.
Well, I don't do too much rpm building, and I haven't
changed permissions on /usr/src/redhat: [dimi@dimi wine]$ rpmbuild --rebuild
mingw-3.0-1.src.rpm
Installing mingw-3.0-1.src.rpm
error: cannot write to %sourcedir /usr/src/redhat/SOURCES
error: mingw-3.0-1.src.rpm cannot be installed
hmm ... strange. My .rpmmacros
is no more than what i pasted above and
my .rpmrc has only directives to build and optimize every package for
athlon.
If you can't build mingw as user too i can put the rpm (compiled for
i386 or i686, i don't mind) on my people.redhat.com page.
Do you have something in your .rpmmacros and/or
.rpmrc that messes with
brp-strip? Cause the spec file has this:
# This keeps brp-strip from fucking up our nonnative binaries
%define __strip /bin/true
which works for me.
I don't even have a .rpmmacros or .rpmrc file: [root@dimi root]# ls /root/.rpm*
ls: /root/.rpm*: No such file or directory
[root@dimi root]# ls ~dimi/.rpm*
ls: /home/dimi/.rpm*: No such file or directory
It's a very standard RH9 installation, I don't usually change
stuff (I just hate configuring things :)).
I hope you at least upgrade the box to
the latest erratas ;)
bye
michael
--
Michael Stefaniuc Tel.: +49-711-96437-199
System Administration Fax.: +49-711-96437-111
Red Hat GmbH Email: mstefani(a)redhat.com
Hauptstaetterstr. 58 http://www.redhat.de/
D-70178 Stuttgart
11:23 p.m.
On Wed, 7 Jan 2004, Michael Stefaniuc wrote:
Here is my .rpmmacros file to be able to build rpms as
normal user. You
need to adapt the paths:
%_topdir /home/mstefani/rpm
%_tmppath /home/mstefani/rpm/INSTALL
Thanks!
You need also to setup the %_topdir directory. Do
following as user you
want to build the rpms:
mkdir -p $_topdir $_tmppath
mkdir $_topdir/{BUILD,RPMS,SOURCES,SPECS,SRPMS}
mkdir $_topdir/RPMS/{i386,i486,i586,i686,noarch,athlon}
That should be all.
Done, works like a charm, but I keep getting the same failure.
hmm ... strange. My .rpmmacros is no more than what i
pasted above and
my .rpmrc has only directives to build and optimize every package for
athlon.
If you can't build mingw as user too i can put the rpm (compiled for
i386 or i686, i don't mind) on my people.redhat.com page.
Yes, I'll take you up on the offer, for the mingw-3.0-1.src.rpm
package, if you can.
I hope you at least upgrade the box to the latest
erratas ;)
Hey, I'm not _that_ lazy! :)
--
Dimi.
8 Jan
8 Jan
1:05 a.m.
On Wed, Jan 07, 2004 at 06:23:13PM -0500, Dimitrie O. Paun wrote:
ftp://people.redhat.com/mstefani/mingw-3.0-1.noarch.rpm
MD5SUM: 6298f5cb4e8a1cac2701273db233dcfb
bye
michael
--
Michael Stefaniuc Tel.: +49-711-96437-199
System Administration Fax.: +49-711-96437-111
Red Hat GmbH Email: mstefani(a)redhat.com
Hauptstaetterstr. 58 http://www.redhat.de/
D-70178 Stuttgart
On Wed, 7 Jan 2004, Michael Stefaniuc wrote:
Did you upgraded
your box to RHL 9 or have you done a fresh install?
Mine is a fresh install.
The only thing i can imagine is that you have something different in
/usr/lib/rpm/. You can check that with:
(for i in /usr/lib/rpm/*; do rpm -qf $i; done) | sort | uniq
I get following output:
redhat-rpm-config-8.0.21-1
rpm-4.2-0.69
rpm-build-4.2-0.69
rpm-devel-4.2-0.69
By appending a " | xargs rpm -V" to the above command you can check if
files from the above rpms are unmodified. No output is good (that's what
i'm getting).
Here is my .rpmmacros file to be able to build
rpms as normal user. You
need to adapt the paths:
%_topdir /home/mstefani/rpm
%_tmppath /home/mstefani/rpm/INSTALL
Thanks!
You need also to setup the %_topdir directory. Do
following as user you
want to build the rpms:
mkdir -p $_topdir $_tmppath
mkdir $_topdir/{BUILD,RPMS,SOURCES,SPECS,SRPMS}
mkdir $_topdir/RPMS/{i386,i486,i586,i686,noarch,athlon}
That should be all.
Done, works like a charm, but I keep getting the same failure. If you
can't build mingw as user too i can put the rpm (compiled for
i386 or i686, i don't mind) on my people.redhat.com page.
Yes, I'll take you up on the offer, for the mingw-3.0-1.src.rpm
package, if you can.
7:54 a.m.
On January 7, 2004 08:05 pm, Michael Stefaniuc wrote:
The only thing i can imagine is that you have
something different in
/usr/lib/rpm/. You can check that with:
(for i in /usr/lib/rpm/*; do rpm -qf $i; done) | sort | uniq
I get following output:
redhat-rpm-config-8.0.21-1
rpm-4.2-0.69
rpm-build-4.2-0.69
rpm-devel-4.2-0.69
I'm getting this:
[dimi@dimi lostwages]$ (for i in /usr/lib/rpm/*; do rpm -qf $i; done) | sort | uniq
file /usr/lib/rpm/athlon-redhat-linux is not owned by any package
file /usr/lib/rpm/i386-redhat-linux is not owned by any package
file /usr/lib/rpm/i486-redhat-linux is not owned by any package
file /usr/lib/rpm/i586-redhat-linux is not owned by any package
file /usr/lib/rpm/i686-redhat-linux is not owned by any package
rpm-4.2-0.69
rpm-build-4.2-0.69
rpm-devel-4.2-0.69
By appending a " | xargs rpm -V" to the
above command you can check if
files from the above rpms are unmodified. No output is good (that's what
i'm getting).
I get this:
....L... /usr/lib/rpm/athlon-linux
....L... /usr/lib/rpm/i386-linux
S.5..... /usr/lib/rpm/i386-linux/macros
....L... /usr/lib/rpm/i486-linux
....L... /usr/lib/rpm/i586-linux
....L... /usr/lib/rpm/i686-linux
....L... /usr/lib/rpm/noarch-linux
--
Dimi.
20 Feb
20 Feb
10:47 p.m.
Am Montag, 22. Dezember 2003 23:37 schrieb Michael Stefaniuc:
Hello!
Here are the steps needed to setup a MinGW on a Red Hat Linux like rpm
based system (Fedora Core, Mandrake Linux, ... should probably work even
on a SuSE Linux)
Hello,
just for the record. The rpm mingw-binutils-2.13.90.20030111.1-2.src.rpm does
not build on SuSE 9.0 . The problem for me was that the file that are
installed inside the LC_MESSAGES directoies will not be installed into the
change-root environment. They are installed into the normal environemnt.
installing fr.gmo as /usr/mingw/share/locale/fr/LC_MESSAGES/bfd.mo
installing tr.gmo as /usr/mingw/share/locale/tr/LC_MESSAGES/bfd.mo
installing ja.gmo as /usr/mingw/share/locale/ja/LC_MESSAGES/bfd.mo
[snip]
when the binary rpm is build these file are missing in the change-root
environment and the build fails
I call /usr/sbin/Check...
+ /usr/sbin/Check
+ /usr/lib/rpm/brp-compress
Processing files: mingw-binutils-2.13.90.20030111.1-2
error: File not found: /var/tmp/mingw-binutils-2.13.90.20030111.1-2-buildroot/
usr/mingw/share
i got the rpm build by copying the files into the change-root environment
during building the rpm.
Bye Stefan
7393
days inactive
7453
days old
10 comments
6 participants
participants (6)
-
Boaz Harrosh -
Dimitrie O. Paun -
Dimitrie O. Paun -
Ferenc Wagner -
Michael Stefaniuc -
Stefan Leichter