18 Jun
2005
18 Jun
'05
3:09 a.m.
Hello all,
I've noticed some problems installing Internet Explorer 6 SP1 with any
version of WINE newer than 20050310, and that includes CVS as of
yesterday. Apparently, I'm not the only one; many other are also having
issues with 20050419 and 20050524. With my current setup, I get this
error repeatedly at 81% during installation:
fixme:thunk:__regs_CommonUnimpStub generic stub: ?
It keeps looping like that on and on forever, and the install never
finishes, but the UI stays responsive. I've had many issues installing
IE in the past, but nothing like this. Can anyone give me any leads as
to what might cause this? If it might help, I've applied Oliver
Stieber's latest DX9 patch, and have tried both Wine Tools and Sidenet.
Thanks very much,
James Liggett
18 Jun
18 Jun
3:33 a.m.
James Liggett wrote:
Hello all,
I've noticed some problems installing Internet Explorer 6 SP1 with any
version of WINE newer than 20050310, and that includes CVS as of
yesterday. Apparently, I'm not the only one; many other are also having
issues with 20050419 and 20050524. With my current setup, I get this
error repeatedly at 81% during installation:
fixme:thunk:__regs_CommonUnimpStub generic stub: ?
It keeps looping like that on and on forever, and the install never
finishes, but the UI stays responsive. I've had many issues installing
IE in the past, but nothing like this. Can anyone give me any leads as
to what might cause this? If it might help, I've applied Oliver
Stieber's latest DX9 patch, and have tried both Wine Tools and Sidenet.
Don't use native (core) Win98 DLLs.
Rob
19 Jun
19 Jun
1:08 p.m.
On Fri, 17 Jun 2005 22:33:19 -0500, Rob Shearman wrote:
Don't use native (core) Win98 DLLs.
In this case it can't be avoided, IE installer unzips a native
advapi32.dll into the same directory it runs from, so it overrides
builtin advapi. Our GDI32 then calls a function which is exported by this
native advapi but not implemented as part of a while conditional, so we
enter an infinite loop.
I debugged this a couple of years ago I guess, the solution now as then is
to set "advapi32=b" as a DLL override. I'm not sure how else to fix this,
except by making advapi32 one of the magic DLLs that will never be loaded
as native. I think that solution was dropped though.
thanks -mike
2:32 p.m.
On Saturday 18 June 2005 03:09, James Liggett wrote:
Hello all,
I've noticed some problems installing Internet Explorer 6 SP1 with any
version of WINE newer than 20050310, and that includes CVS as of
yesterday. Apparently, I'm not the only one; many other are also having
issues with 20050419 and 20050524. With my current setup, I get this
error repeatedly at 81% during installation:
fixme:thunk:__regs_CommonUnimpStub generic stub: ?
Try setting advapi32 to builtin
only, this has helped me. ie6 setup seems to
load some native dlls if they are set to builitn,native, so it's necessary to
force advapi32 to builtin
[DllOverrides]
"advapi32" = "builtin"
Hope that helps,
Stefan
2:43 p.m.
New subject: Possible regressions running Dreamweaver MX?
After pulling the CVS changes yesterday, My Dreamweaver MX no longer
starts (hangs on splash). I'm pretty sure I ran it against CVS on
Thursday, so this must be a recent change.
I turned on a couple of debug channels and it seems to be looping on a
NtWaitForMultipleObjects whose signal never fires.
Anyone else seeing this, or just me?
9:35 p.m.
New subject: Possible regressions running Dreamweaver MX?
Evil wrote:
After pulling the CVS changes yesterday, My
Dreamweaver MX no longer
starts (hangs on splash). I'm pretty sure I ran it against CVS on
Thursday, so this must be a recent change.
I turned on a couple of debug channels and it seems to be looping on a
NtWaitForMultipleObjects whose signal never fires.
Anyone else seeing this, or just me?
There were a number of major changes made on Thursday to the
configuration options. I would make sure all of your configuration
settings are moved over to the new registry location first. Then if that
doesn't work, you can start a binary search for regression using CVS.
--
Rob Shearman
20 Jun
20 Jun
2:11 a.m.
New subject: Possible regressions running Dreamweaver MX?
Robert Shearman wrote:
Evil wrote:
I deleted the .wine directory and re-installed DreamWeaver
(successfully), and it's hanging in the same place (splash,
NtWaitForMultipleObjects)... so it probably is a regression issue. I'll
attempt to figure it out mid-week, if someone doesn't beat me to it
(crossing fingers <g>).
-J
After pulling the CVS changes yesterday, My
Dreamweaver MX no longer
starts (hangs on splash). I'm pretty sure I ran it against CVS on
Thursday, so this must be a recent change.
I turned on a couple of debug channels and it seems to be looping on
a NtWaitForMultipleObjects whose signal never fires.
Anyone else seeing this, or just me?
There were a number of major changes made on Thursday to the
configuration options. I would make sure all of your configuration
settings are moved over to the new registry location first. Then if
that doesn't work, you can start a binary search for regression using
CVS.
3 Jul
3 Jul
4:10 p.m.
New subject: Possible regressions running Dreamweaver MX? [Solved]
I finally got around to looking further into this today. It turns out
the culprit wasn't actually a regression at all.
When the settings were moved out of the config file to the registry, I
didn't realize that I lost all the DLL override settings. Failure to
use the native msvcrt.dll was what stopped it on the splash screen.
After adding the override back via winecfg (and overriding comctl32 +
commctl, to fix dialog problems), it appears to work as well as ever.
Cheers,
J
Evil wrote:
Robert Shearman wrote:
Evil wrote:
I deleted the .wine directory and re-installed DreamWeaver
(successfully), and it's hanging in the same place (splash,
NtWaitForMultipleObjects)... so it probably is a regression issue.
I'll attempt to figure it out mid-week, if someone doesn't beat me to
it (crossing fingers <g>).
-J
After pulling the CVS changes yesterday, My
Dreamweaver MX no longer
starts (hangs on splash). I'm pretty sure I ran it against CVS on
Thursday, so this must be a recent change.
I turned on a couple of debug channels and it seems to be looping on
a NtWaitForMultipleObjects whose signal never fires.
Anyone else seeing this, or just me?
There were a number of major changes made on Thursday to the
configuration options. I would make sure all of your configuration
settings are moved over to the new registry location first. Then if
that doesn't work, you can start a binary search for regression using
CVS.
19 Jun
19 Jun
6:56 p.m.
Hi Stefan,
Thanks for the reply. I have tried this already, and it doesn't seem to
work. I tried setting all dlls for ie6setup.exe to builtin, and while I
got more fixme's than normal, the problem still didn't go away. Here's
the config file I'm using:
WINE REGISTRY Version 2
;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config
;; If you think it is necessary to show others your complete config for
a
;; bug report, filter out empty lines and comments with
;; grep -v "^;" ~/.wine/config | grep '.'
[wine]
"ShowDirSymlinks" = "1"
"ShowDotFiles" = "1"
[Version]
; Windows version to imitate
(win95,win98,winme,nt351,nt40,win2k,winxp,win2k3,win20,win30,win31)
"Windows" = "win98"
; DOS version to imitate
"DOS" = "6.22"
;; For running Internet Explorer 6, Service Pack 1
;[AppDefaults\\iexplore.exe\\Version]
;"Windows" = "win98"
[DllOverrides]
"*" = "builtin"
I've modified the config file that's given in the how-to at
franksconrner.org to use all builtin dlls, but I still see the problem.
By the way, what is a thunk, anyway? I've been programming in Win32 for
years and have never really come across them.
Thanks a lot,
James
On Sun, 2005-06-19 at 14:32 +0000, Stefan Dösinger wrote:
On Saturday 18 June 2005 03:09, James Liggett wrote:
Hello all,
I've noticed some problems installing Internet Explorer 6 SP1 with any
version of WINE newer than 20050310, and that includes CVS as of
yesterday. Apparently, I'm not the only one; many other are also having
issues with 20050419 and 20050524. With my current setup, I get this
error repeatedly at 81% during installation:
fixme:thunk:__regs_CommonUnimpStub generic stub: ?
Try setting advapi32 to builtin
only, this has helped me. ie6 setup seems to
load some native dlls if they are set to builitn,native, so it's necessary to
force advapi32 to builtin
[DllOverrides]
"advapi32" = "builtin"
Hope that helps,
Stefan
9:57 p.m.
On Sunday 19 June 2005 18:56, James Liggett wrote:
Hi Stefan,
Thanks for the reply. I have tried this already, and it doesn't seem to
work. I tried setting all dlls for ie6setup.exe to builtin, and while I
got more fixme's than normal, the problem still didn't go away. Here's
the config file I'm using:
Strange... No further idea :-(
Stefan
6894
days inactive
6909
days old
9 comments
7 participants
participants (7)
-
Evil -
Evil -
James Liggett -
Mike Hearn -
Rob Shearman -
Robert Shearman
-
Stefan Dösinger